![Connecting a TV or Projector](/images/new-backgrounds/21798/2179857x1.webp)
Connecting the AV
Connecting a TV or Projector
Step 1: Video Connection
Choose a video connection that matches your TV ( A or B ), and then make the connection.
Step 2: Audio Connection
Choose an audio connection that matches your TV ( a , b , or c ), and then make the connection.
•With connection , you can listen to and record audio from your TV or listen in Zone 2.
•To enjoy Dolby Digital and DTS, use connection b or c . (To record or listen in Zone 2 as well, use a and b , or a and .)
Connection | AV receiver | Signal flow | TV | ||
| A |
| COMPONENT VIDEO OUT | ⇒ | Component video input |
|
|
| MONITOR OUT V | ⇒ | Composite video input |
|
|
| |||
|
|
|
|
|
|
| a |
| TV/TAPE IN L/R | ⇐ | Analog audio L/R output |
|
|
| DIGITAL IN COAXIAL 2 (CBL/SAT) | ⇐ | Digital coaxial output |
|
|
| |||
|
|
|
|
|
|
| c |
| DIGITAL IN OPTICAL 1 (TV/TAPE) | ⇐ | Digital optical output |
|
|
|
|
|
|
c
b
A
B
a |
|
|
|
|
| L | R |
OPTICAL | COAXIAL | Y | PB | PR | AUDIO | VIDEO |
OUT | OUT | COMPONENT VIDEO IN | OUT | IN |
Connect one or the other Connection b must be assigned (see page 43)
TV, projector,
etc.
Hint!
If your TV has no audio outputs, connect an audio output from your VCR or cable or satellite receiver to the AV receiver and use its tuner to listen to TV programs through the AV receiver (see pages 31 and 33).
29