![First Time Setup](/images/new-backgrounds/21798/2179881x1.webp)
First Time Setup
This section explains the settings that you need to make before using the AV receiver for the very first time.
HDMI Input Setup
If you connect a video component to an HDMI IN, you must assign that input to an input selector. For example, if you connect your DVD player to HDMI IN1, you must assign HDMI IN1 to the DVD/BD input selector.
Input selector | Default assignment |
|
|
DVD/BD | HDMI1 |
|
|
VCR/DVR | HDMI2 |
|
|
CBL/SAT | HDMI3 |
|
|
AUX | - - - - - |
|
|
TV/TAPE | - - - - - |
|
|
CD | - - - - - |
|
|
PORT | - - - - - |
|
|
RECEIVER
ENTER qwer
SETUP
1 | Press the [RECEIVER] button, |
| |
| followed by the [SETUP] button. |
2 Use the Up and Down [q]/[w] buttons to select “1. Input Assign”, and then press [ENTER].
3 | Use the Up and Down [q]/[w] |
| buttons to select |
and then press [ENTER].
4 | Use the Up and Down [q]/[w] |
| buttons to select an input |
selector, and use the Left and Right [e]/[r] buttons to select: HDMI1: Select if the video
component is connected to HDMI IN 1.
HDMI2: Select if the video component is connected to HDMI IN 2.
HDMI3: Select if the video component is connected to HDMI IN 3.
HDMI4: Select if the video component is connected to HDMI IN 4.
- - - -
| HDMI OUT. | |
|
| |
5 | Press the [SETUP] button. | |
Setup closes. | ||
|
Notes:
•Each HDMI IN cannot be assigned to more than one input selector.
•When an HDMI IN is assigned to an input selector as explained here, the digital audio input for that input selector is automatically set to the same HDMI IN. See “Digital Input Setup” on page 43.
•If you connect an input component (such as
•This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.
•Do not assign the component connected with the HDMI input to the TV/TAPE selector when you set “TV Ctrl” setting to “On” (see page 79). Otherwise, appropriate CEC (Consumer Electronics Control) operation is not guaranteed.
41