Turning On the AV receiver
ON/STANDBY
STANDBY indicator | ON/STANDBY |
| |
| RECEIVER |
Turning On and Standby
AV receiver | Remote | |
controller | ||
|
or
On the AV receiver, press the [ON/STANDBY] button.
On the remote controller, press the [RECEIVER] button, followed by the [ON/STANDBY] button.
The AV receiver comes on, the display lights up, and the STANDBY indicator goes off.
To turn the AV receiver off, press the [ON/STANDBY] button, or press the remote controller’s [ON/STANDBY] button. The AV receiver will enter Standby mode. To prevent any loud surprises the next time you turn on the AV receiver, turn down the volume before you turn it off.
Up and Running in a Few Easy Steps
To get your system up and running with the minimum of fuss, here’s a few pointers to help you configure the AV receiver before you use it for the very first time. These settings only need to be made once.
■ Do the 2EQ Room Correction and Speaker
See “Audyssey 2EQ™ Room Correction and Speaker Setup” on page 46.
■ Did you connect a component to an HDMI input, | Y |
| |
HDMI |
| ||
component video input, or digital audio input? | PB | COAXIAL | |
If you did, see “HDMI Input Setup” on page 41, “Component Video | PR |
| |
Input Setup” on page 42, or “Digital Input Setup” on page 43 | OPTICAL | ||
| |||
|
| ||
respectively. |
|
|
■Did you connect a
If you did, see “Connecting a Dock with the Universal Port connector” on page 38.
40