First Time Setup—Continued
Component Video Input Setup
If you connect a video component to a COMPONENT VIDEO IN, you must assign that input to an input selector. For example, if you connect your DVD player to COMPONENT VIDEO IN 2, you must assign COMPONENT VIDEO IN 2 to the DVD/BD input selector.
Input selector | Default assignment |
|
|
DVD/BD | IN1 |
|
|
VCR/DVR | - - - - - |
|
|
CBL/SAT | IN2 |
|
|
AUX | - - - - - |
|
|
TV/TAPE | - - - - - |
|
|
CD | - - - - - |
|
|
PORT | - - - - - |
|
|
RECEIVER
ENTER qwer
SETUP
1 | Press the [RECEIVER] button, |
| |
| followed by the [SETUP] button. |
2 Use the Up and Down [q]/[w] buttons to select “1. Input Assign”, and then press [ENTER].
3 | Use the Up and Down [q]/[w] |
| buttons to select |
4 | Use the Up and Down [q]/[w] |
| buttons to select an input |
selector, and use the Left and Right [e]/[r] buttons to select:
IN1: Select if the video component is connected to
COMPONENT VIDEO IN 1. IN2: Select if the video component
is connected to
COMPONENT VIDEO IN 2.
- - - -
| COMPONENT VIDEO | |
| OUT. | |
5 | Press the [SETUP] button. | |
Setup closes. | ||
|
Notes:
•If you connect an input component (such as
•This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.
42