Listening to the Radio—Continued
Using the Tuner
With the
TUNER q TUNING w
TUNING MODE
Listening to the Radio
Use the [TUNER] input selector button to select “AM” or “FM”.
In this example, FM has been selected.
Band Frequency
(Actual display depends on country.)
Tuning into AM/FM Radio Stations
■Auto Tuning Mode
1Press the [TUNING MODE] button so that the AUTO indicator
appears on the display.
2 |
| Press the TUNING Up or Down |
|
| |
|
| [q]/[w] button. |
|
| Searching stops when a station is |
|
| found. |
■Manual Tuning Mode
1Press the [TUNING MODE] button so that the AUTO indicator
disappears from the display.
2 | Press and hold the TUNING Up or |
| |
| Down [q]/[w] button. |
| The frequency stops changing when |
| you release the button. |
| Press the button repeatedly to change |
| the frequency one step at a time. |
This model changes FM/AM frequency in 200 k/10 k (or 50 k/9 k) Hz steps.
In Manual Tuning mode, FM stations will be in mono.
Tuning into Weak FM Stereo Stations
If the signal from a stereo FM station is weak, it may be impossible to get good reception. In this case, switch to Manual Tuning mode and listen to the station in mono.
Note:
You can also use the remote controller’s Up and Down [q]/[w] buttons to tune the radio.
When tuned into a station, the TUNED indicator appears. When tuned into a stereo FM station, the FM STEREO indicator also appears.
FM STEREO
AUTO
TUNED
54