First Time
Digital Input Setup
If you connect a component to a digital audio input, you must assign that input to an input selector. For example, if you connect your CD player to OPTICAL IN 1, you must assign OPTICAL IN 1 to the CD input selector.
These are the default assignments.
Input selector | Default assignment |
|
|
DVD/BD | COAX1 |
|
|
VCR/DVR | - - - - - |
|
|
CBL/SAT | COAX2 |
|
|
AUX | - - - - - |
|
|
TV/TAPE | OPT1 |
|
|
CD | OPT2 |
|
|
PORT | - - - - - |
|
|
RECEIVER
ENTER qwer
SETUP
1 | Press the [RECEIVER] button, |
| |
| followed by the [SETUP] button. |
2 Use the Up and Down [q]/[w] buttons to select “1. Input Assign”, and then press [ENTER].
3 | Use the Up and Down [q]/[w] |
| buttons to select |
and then press [ENTER].
4 | Use the Up and Down [q]/[w] |
| buttons to select an input selector, |
and then use the Left and Right [e]/[r] buttons to select: COAX1:Select if the component is
connected to DIGITAL IN COAXIAL 1.
COAX2:Select if the component is connected to DIGITAL IN COAXIAL 2.
OPT1: Select if the component is connected to DIGITAL IN OPTICAL 1.
OPT2: Select if the component is connected to DIGITAL IN OPTICAL 2.
- - - -
Notes:
•Press the [ENTER] button when you do not use the signal of audio from
the HDMI IN. The “* ” mark is displayed like “COAX1* ”.
•For the input selector that you want to listen the analog audio, set to “- - - -
5 | Press the [SETUP] button. |
| |
| Setup closes. |
Notes:
•When an HDMI IN is assigned to an input selector in “HDMI Input Setup” on page 41, this input assignment is automatically set to the same HDMI IN. And in addition to the usual inputs (e.g., COAX1, COAX2, etc.), you can also select HDMI inputs.
•If you connect an input component (such as
•This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.
43