Jensen JTA-980 UN-FINALIZE or Erase a CD-RW Disc, UN-FINALIZE a CD-RW Disc, II Erase ONE Track

Page 17

Notes:

-The time for finalizing is subject to the contents of the recording and it may take up to 15 minutes in some cases.

-No buttons will work during the finalize process.

-Never turn off the power or un-plug the power cord during finalize process.

-The CD-R disc cannot be recorder again after finalizing.

-Finalized CD-R discs can be played in ordinary CD players, but finalized CD-RW disc may not play in ordinary CD players.

-Due to the variance of the compatibility of CD-R or CD-RW discs in the market, please change to other one if you find the recording performance of the existing one unacceptable. This is not a malfunction of the system.

C) UN-FINALIZE OR ERASE A CD-RW DISC

It is possible to erase the last recorded track or erase a whole record disc (CD-RW only).

I) UN-FINALIZE A CD-RW DISC

1.Press the “CD 2” function button to enter the CD-2mode and place the CD-RW disc to be un-finalized in CD-2compartment.

2.Wait until “busy” disappears from the LCD display, press the “ERASE “ button with the CD in stop mode. The message “UN FIN-d “ will appear on the LCD display.

3.Press the “PLAY/PAUSE ” button to start the un-finalize process and wait until “busy

“disappears from the LCD display.

4.“NO TOC “ indicator, total track numbers and playing time will appear on the LCD display after the un-finalize process is completed.

II) ERASE ONE TRACK

1.Press the “CD 2” function button to enter the CD-2mode and place the CD-RW disc to be erased in CD-2compartment. Wait until the “busy” message disappears from the LCD display. If the disc is finalized, you have to un-finalize it before you can delete tracks.

2.Press the “ERASE “ button when in stop mode, erase the last track message and “Er XX(track no.)” will appear on the LCD display.

3.Press the “PLAY/PAUSE ” button to start erasing the last track.

4.Repeat step 2 and 3 to continue the erasing.

5.Press the “ STOP ” button to quit the erase mode if necessary.

III) ERASE ALL TRACKS

1.Press the “CD 2” function button to enter the CD-2mode and place the CD-RW disc to be erased in CD-2compartment.

2.Press the “ERASE “ button twice with the CD in stop mode and wait until erase all message “Er ALL“ appears on the LCD display.

3.Press the “PLAY/PAUSE ” button to start erasing.

4.The LCD will show “0000000 “ to confirm the erase process is completed.

Notes:

-This operation cannot be undone.

-You cannot erase tracks one-by-one on a CD-RW disc recorded on another system, but it is possible to erase all.

16

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Retain this Booklet for Future Reference JTA-980To establish a safe level Dear Jensen CustomerWe Want You Listening For a Lifetime Customers RecordImportant Safety Instructions Page Page On Condensation On PlacementOn Protection Against Laser Energy Exposure Protect Your Furniture Compliance with FCC RegulationsSpeaker Connection Connecting the AC Power CordGetting Started Main Unit Location of Controls and IndicatorsButton Description Remote ControlBattery Precautions Battery InstallationListening to Radio Operating InstructionsPlaying Compact Disc Playing Compact DiscsStop Mode Play / Pause ModeSkip Mode Skip Up /Skip Down  Random Play Using the Main Unit ControlPlaying Compact Discs in CD-2 Recording Function on CD-2 Recording ModeIi Recoding by Program II Phonograph RecordingRecording Setting UN-FINALIZE a CD-RW Disc UN-FINALIZE or Erase a CD-RW DiscII Erase ONE Track III Erase ALL TracksStereo Phonograph Operation Listening to TapeGeneral Operation RemarkBass Boost Auxiliary InputMute Function Line OUT ConnectionCassette Care ResettingCare and Maintenance Compact Disc Care Cleaning the UnitProblem Possible Cause Solution Troubleshooting GuidePower Requirement SpecificationPower Consumption Frequency RangeDAY Limited Warranty and Service Valid in the U.S.A only
Top Page Image Contents