Jensen JTA-980 user manual Getting Started, Speaker Connection, Connecting the AC Power Cord

Page 8

GETTING STARTED

SPEAKER CONNECTION

1.Insert the speaker cable ends (exposed wires) into the terminals located on the back of the main unit by pushing down the lever of the left speaker terminal and then the right speaker terminal

2.Connect the left speaker to the left speaker terminals with the red wire to L+ and the black wire to L -.

3.Connect the right speaker to the right speaker terminals with the red wire to R+ and the black wire to R -.

NOTE:

Make sure that the power is turned off when connecting or disconnecting the speakers. Make sure that the speakers are connected to the correct terminals.

CONNECTING THE AC POWER CORD

After connecting the speakers unwind the AC power cord fully and connect it to any convenient household 120V~ 60Hz AC outlet

NOTE:

The product is designed to operate on normal 120V~ 60Hz AC only. Connecting this system to any other power supply could result in damage to the unit which is not covered by your warranty. You will noted that this system is equipped with a polarized AC power plug having one blade wider than the other. This is a safety feature.

If this plug does not fit into your existing AC outlet, do not try to defeat this safety feature by filling the wide blade to make it fit into your outlet. If this plug will not fit into your outlet, you probably have an outdated non-polarized AC outlet. You should have your outlet changed by a qualified licensed electrician.

7

Image 8
Contents JTA-980 Retain this Booklet for Future ReferenceDear Jensen Customer To establish a safe levelWe Want You Listening For a Lifetime Customers RecordImportant Safety Instructions Page Page On Condensation On PlacementOn Protection Against Laser Energy Exposure Compliance with FCC Regulations Protect Your FurnitureSpeaker Connection Connecting the AC Power CordGetting Started Location of Controls and Indicators Main UnitRemote Control Button DescriptionBattery Installation Battery PrecautionsOperating Instructions Listening to RadioPlaying Compact Disc Playing Compact DiscsPlay / Pause Mode Stop ModeSkip Mode Skip Up /Skip Down  Random Play Using the Main Unit ControlPlaying Compact Discs in CD-2 Recording Mode Recording Function on CD-2Ii Recoding by Program II Phonograph RecordingRecording Setting UN-FINALIZE or Erase a CD-RW Disc UN-FINALIZE a CD-RW DiscII Erase ONE Track III Erase ALL TracksListening to Tape Stereo Phonograph OperationGeneral Operation RemarkAuxiliary Input Bass BoostMute Function Line OUT ConnectionCassette Care ResettingCare and Maintenance Cleaning the Unit Compact Disc CareTroubleshooting Guide Problem Possible Cause SolutionSpecification Power RequirementPower Consumption Frequency RangeDAY Limited Warranty and Service Valid in the U.S.A only