Jensen JTA-980 user manual Auxiliary Input, Bass Boost, Mute Function, Line OUT Connection

Page 19

BASS BOOST

Press down the “BASS BOOST” button on the main unit if you want to enhance the bass when listening to the system. Press the button again to turn off bass boost effect.

MUTE FUNCTION

-Press the MUTE button on remote control to mute the sound output from speaker temporarily, no sound “NO SND” indicator will appear on display.

-Press the MUTE button again to resume to normal speaker playback.

LINE OUT CONNECTION

You can connect this unit to an external Hi-Fi / AMPLIFIER system by connecting the LINE OUT socket to the auxiliary input socket of your Hi-Fi / AMPLIFIER system with RCA cables (not included).

Note: The Volume control on the main unit will not adjust the volume when using the LINE OUT.

3.5MM STEREO HEADPHONE JACK

The stereo headphone jack is located on the left front panel. Plug a set of stereo headphones (not included) into this jack for private listening without disturbing others. The speakers are automatically disconnected when headphones are connected to the jack.

IMPORTANT: When using headphones, always set the volume control to a low level before you put the headphone on. Then put the headphone on and gradually increase the volume to a comfortable listening level.

AUXILIARY INPUT

This unit provides an auxiliary audio signal input jack for connecting external audio devices like MP3 players, CD players and older, non-dockable iPods (except iPod shuffle 3rd gen) so you can listen to your external source through the speakers of this system.

1.Use an audio cable (not included) with one 3.5 mm stereo plug on each end of the cable.

2.Plug one end into the Aux-in jack on the main unit and the other end of the cable into the Line-out Jack or Headphone Jack of your external audio device.

3.Turn on the external audio device.

4.To select auxiliary audio input, press the “CD 1/AUX” button on unit front panel to select “AUX IN” mode.

5.The volume level can now be controlled through the main unit. Operate all other functions on the auxiliary device as usual.

Note:

(1)If the Line Out Jack of your external device is connected, then you only need to adjust the volume control of this system. If the Headphone Jack of your external device is connected, then you may need to adjust both the volume control of your external device and the volume control of this system to find the most desirable volume setting.

(2)Slide the MODE SWITCH to turn off the system when you finish listening. Don't forget to switch off the power on your external device as well.

18

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Retain this Booklet for Future Reference JTA-980Customers Record Dear Jensen CustomerTo establish a safe level We Want You Listening For a LifetimeImportant Safety Instructions Page Page On Protection Against Laser Energy Exposure On PlacementOn Condensation Protect Your Furniture Compliance with FCC RegulationsGetting Started Connecting the AC Power CordSpeaker Connection Main Unit Location of Controls and IndicatorsButton Description Remote ControlBattery Precautions Battery InstallationPlaying Compact Discs Operating InstructionsListening to Radio Playing Compact Disc Random Play Using the Main Unit Control Play / Pause ModeStop Mode Skip Mode Skip Up /Skip DownPlaying Compact Discs in CD-2 II Phonograph Recording Recording ModeRecording Function on CD-2 Ii Recoding by ProgramRecording Setting III Erase ALL Tracks UN-FINALIZE or Erase a CD-RW DiscUN-FINALIZE a CD-RW Disc II Erase ONE TrackRemark Listening to TapeStereo Phonograph Operation General OperationLine OUT Connection Auxiliary InputBass Boost Mute FunctionCare and Maintenance ResettingCassette Care Compact Disc Care Cleaning the UnitProblem Possible Cause Solution Troubleshooting GuideFrequency Range SpecificationPower Requirement Power ConsumptionDAY Limited Warranty and Service Valid in the U.S.A only
Top Page Image Contents