Maintenance

SWEEPING -- The fanning action of the rotat-	Sweeping
ing line can be used for a quick and easy
clean up. Keep the line parallel to and above
the surfaces being swept and move the tool
from side to side.

WARNING: Disconnect the spark plug before performing maintenance except for carburetor adjustments.

HELPFUL TIP

IMPORTANT: Have all

repairs other than the rec- ommended maintenance described in the instruction manual performed by an authorized service dealer.

If any dealer other than an authorized service dealer performs work on the product, Electrolux Home Products, Inc., may not pay for repairs under war- ranty. It is your responsibility to maintain and perform general maintenance.

CHECK FOR LOOSE

FASTENERS AND PARTS

SSpark Plug Boot S Air Filter

S Housing Screws

S Assist Handle Screw S Debris Shield

CHECK FOR DAMAGED OR WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

S STOP Switch -- Ensure STOP switch functions properly by pushing and holding the switch in the STOP position. Make sure engine stops. Restart engine and continue.

SFuel Tank -- Discontinue use of unit if fuel

tank shows signs of damage or leaks.

SDebris Shield -- Discontinue use of unit if debris shield is damaged.

INSPECT AND CLEAN UNIT AND DE- CALS

S After each use, inspect complete unit for loose or damaged parts. Clean the unit and decals using a damp cloth with a mild deter- gent.

SWipe off unit with a clean dry cloth.

CLEAN AIR FILTER

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean after every 5 hours of operation.

1.Clean the air filter cover and the area around it to keep dirt from falling into the

carburetor chamber when the cover is opened.

2.Open air filter cover by pushing button

(see illustration). Remove air filter. NOTE: To avoid creating a fire hazard or producing harmful evaporative emissions, do not clean filter in gasoline or other flammable solvent.

3.Wash the filter in soap and water.

4.Allow filter to dry.

5.Replace air filter and close cover.

Button Air Filter

Air Filter Cover

MUFFLER AND SPARK ARREST- ING SCREEN

WARNING: The muffler on this prod- uct contains chemicals known to the State of California to cause cancer.

As your unit is used, carbon deposits build up on the muffler and spark arresting screen. For normal homeowner use, however, the muffler and spark arresting screen will not re- quire any service. After 50 hours of use, we recommend that your muffler be serviced or replaced by your authorized service dealer.

REPLACE SPARK PLUG

Replace the spark plug each year to ensure the engine starts easier and runs better. Set spark plug gap at 0.025 inch (0.6 mm). Igni- tion timing is fixed and nonadjustable.

1.Twist, then pull off spark plug boot.

2.Remove spark plug from cylinder and discard.

3.Replace with Champion RCJ-6Y spark plug and tighten securely with a 3/4 inch (19 mm) socket wrench.

4.Reinstall the spark plug boot.

P4500F, 545186897 specifications

The Poulan P4500F is a robust, high-performance gas-powered chainsaw that caters to both professional and amateur users. Designed for versatility and efficiency, it stands out as an ideal tool for tasks ranging from light pruning to more demanding cutting jobs.

One of the key features of the Poulan P4500F is its powerful 50cc, 2-cycle engine. This engine delivers ample power to easily tackle tough cutting tasks, while still being lightweight enough for extended use without excessive fatigue. The chainsaw is equipped with a 16-inch cutting bar, providing the perfect balance of size and maneuverability, allowing users to seamlessly navigate through various types of wood.

The P4500F incorporates several advanced technologies to enhance performance and user experience. The Easy Start System minimizes the effort required to pull the starter cord, making it easier to get the chainsaw up and running. This is especially beneficial for users who may struggle with traditional pull-start mechanisms. The chainsaw also integrates an automatic oiler, ensuring that the chain remains lubricated during operation, which not only extends the life of the chain but also enhances cutting efficiency.

In addition to its operational features, the Poulan P4500F is designed with user comfort and safety in mind. The rubberized grip handle provides excellent control and reduces vibration, which helps diminish user fatigue during prolonged use. The chainsaw is also equipped with a chain brake mechanism, which activates quickly in the event of kickback, helping to protect the operator from potential injury.

Furthermore, the P4500F features a tool-less air filter access, simplifying the maintenance process. Users can easily clean or replace the air filter without the need for additional tools, making regular upkeep straightforward and efficient.

Overall, the Poulan P4500F, model number 545186897, is a reliable chainsaw that combines power, technology, and user-friendly features. Whether you are a seasoned professional or a weekend warrior, this chainsaw is designed to deliver excellent performance, making it a valuable addition to any tool collection. Its thoughtful engineering caters to the needs of those looking for a balance between power, ease of use, and maintenance, ensuring that it remains a trustworthy partner in all cutting endeavors.