Poulan P4500F, 545186897 instruction manual Seasonal Storage, Fuel System, Engine, Other, Porting

Page 11

STORAGE

WARNING: Perform the following steps after each use:

SAllow engine to cool before storing or trans-

porting.

SStore unit and fuel in a well ventilated area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

SStore unit with all guards in place. Position unit so that any sharp object cannot acci- dentally cause injury.

SStore unit and fuel well out of the reach of children.

SEASONAL STORAGE

Prepare unit for storage at end of season or if it will not be used for 30 days or more.

If your unit is to be stored for a period of time: S Clean the entire unit before lengthy

storage.

SStore in a clean dry area.

SLightly oil external metal surfaces.

FUEL SYSTEM

Under FUELING ENGINE in the OPERA- TION section of this manual, see message la- beled IMPORTANT regarding the use of ga- sohol in your engine.

Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to the gasoline in the fuel tank or fuel storage container.

Follow the mix instructions found on stabilizer container. Run engine at least 5 minutes after adding stabilizer.

HELPFUL TIP

During storage of your gas/ oil mixture, the oil will sepa- rate from the gas.

We recommend that you shake the gas can weekly to insure proper blending of the gas and oil.

ENGINE

SRemove spark plug and pour 1 teaspoon of 40:1, 2-cycle engine oil (air cooled) through the spark plug opening. Slowly pull the

starter rope 8 to 10 times to distribute oil.

SReplace spark plug with new one of recom- mended type and heat range.

SClean air filter.

S Check entire unit for loose screws, nuts, and bolts. Replace any damaged, broken, or worn parts.

SAt the beginning of the next season, use only fresh fuel having the proper gasoline to oil ratio.

OTHER

SDo not store gasoline from one season to another.

SReplace your gasoline can if it starts to rust.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Manual de Instrucciones Manuel d’Instructions Identification of Safety Symbols Table of ContentsInstruction Manual Safety Information on the Unit Safety RulesCutting Safety Operator SafetyUnit / Maintenance Safety Fuel SafetyCondition of this tool AssemblyAdjusting the Handle Attaching ShieldOperation Starting a Flooded Engine HOW to Stop Your UnitHOW to Start Your Unit Starting a Warm EngineCutting Methods Operating PositionMaintenance Replacing the Cutting Head Service and AdjustmentsCarburetor Idle Speed Adjustment Replacing the LineOther Seasonal StorageFuel System EngineMatheson Blvd. West Mississauga, Ontario L5V 0B4 Limited WarrantyTroubleshooting Table Cause Remedy Canada, contactPage Ment and Repair of Emission

P4500F, 545186897 specifications

The Poulan P4500F is a robust, high-performance gas-powered chainsaw that caters to both professional and amateur users. Designed for versatility and efficiency, it stands out as an ideal tool for tasks ranging from light pruning to more demanding cutting jobs.

One of the key features of the Poulan P4500F is its powerful 50cc, 2-cycle engine. This engine delivers ample power to easily tackle tough cutting tasks, while still being lightweight enough for extended use without excessive fatigue. The chainsaw is equipped with a 16-inch cutting bar, providing the perfect balance of size and maneuverability, allowing users to seamlessly navigate through various types of wood.

The P4500F incorporates several advanced technologies to enhance performance and user experience. The Easy Start System minimizes the effort required to pull the starter cord, making it easier to get the chainsaw up and running. This is especially beneficial for users who may struggle with traditional pull-start mechanisms. The chainsaw also integrates an automatic oiler, ensuring that the chain remains lubricated during operation, which not only extends the life of the chain but also enhances cutting efficiency.

In addition to its operational features, the Poulan P4500F is designed with user comfort and safety in mind. The rubberized grip handle provides excellent control and reduces vibration, which helps diminish user fatigue during prolonged use. The chainsaw is also equipped with a chain brake mechanism, which activates quickly in the event of kickback, helping to protect the operator from potential injury.

Furthermore, the P4500F features a tool-less air filter access, simplifying the maintenance process. Users can easily clean or replace the air filter without the need for additional tools, making regular upkeep straightforward and efficient.

Overall, the Poulan P4500F, model number 545186897, is a reliable chainsaw that combines power, technology, and user-friendly features. Whether you are a seasoned professional or a weekend warrior, this chainsaw is designed to deliver excellent performance, making it a valuable addition to any tool collection. Its thoughtful engineering caters to the needs of those looking for a balance between power, ease of use, and maintenance, ensuring that it remains a trustworthy partner in all cutting endeavors.
Top Page Image Contents