Operator Safety, Unit / Maintenance Safety

OPERATOR SAFETY

S Dress properly. Always wear safety glasses or similar eye protection when op- erating, or performing maintenance, on your unit (safety glasses are available). Eye protection should be marked Z87.

SAlways wear face or dust mask if operation is dusty.

SAlways wear heavy, long pants, long sleeves, boots, and gloves. Wearing safety leg guards is recommended.

S Always wear foot protection. Do not go barefoot or wear sandals. Stay clear of spinning line.

SSecure hair above shoulder length. Secure or remove loose clothing or clothing with loosely hanging ties, straps, tassels, etc.

They can be caught in moving parts.

SBeing fully covered also helps protect you from debris and pieces of toxic plants thrown by spinning line.

SStay alert. Do not operate this unit when you are tired, ill, upset or under the influence of al- cohol, drugs, or medication. Watch what you are doing; use common sense.

SWear hearing protection.

SNever start or run inside a closed room or

building. Breathing exhaust fumes can kill.

SKeep handles free of oil and fuel.

UNIT / MAINTENANCE SAFETY

WARNING: Disconnect the spark plug before performing maintenance except carburetor adjustments.

S Look for and replace damaged or loose parts before each use. Look for and repair fuel leaks before use. Keep in good working condition.

S Replace trimmer head parts that are chipped, cracked, broken, or damaged in any other way before using the unit.

SMaintain unit according to recommended pro-

cedures. Keep cutting line at proper length. S Use only 0.095 inch (2,4 mm) diameter Poulan/WEED EATER brand replacement line. Never use wire, rope, string, etc.

SInstall required shield properly before using the unit. Use only specified trimmer head; make sure it is properly installed and securely fastened.

SMake sure unit is assembled correctly as shown in this manual.

S Make carburetor adjustments with lower end supported to prevent line from contact- ing any object.

SKeep others away when making carburetor

adjustments.

S Use only recommended Poulan/WEED EATER accessories and replacement parts.

SHave all maintenance and service not ex- plained in this manual performed by an au- thorized service dealer.

FUEL SAFETY

SMix and pour fuel outdoors.

SKeep away from sparks or flames. S Use a container approved for fuel.

S Do not smoke or allow smoking near fuel or the unit.

S Avoid spilling fuel or oil. Wipe up all fuel spills.

SMove at least 10 feet (3 meters) away from fueling site before starting engine.

S Stop engine and allow to cool before re- moving fuel cap.

S Always store gasoline in a container ap- proved for flammable liquids.

CUTTING SAFETY

WARNING: Inspect the area before each use. Remove objects (rocks, broken glass, nails, wire, etc.) which can be thrown by or become entangled in line. Hard objects can damage the trimmer head and be thrown causing serious injury.

SKeep others including children, animals, by- standers, and helpers at least 50 feet (15 me- ters) away. Bystanders should be encour- aged to wear safety glasses. Stop engine immediately if you are approached.

SUse only for trimming, scalping, mowing and

sweeping. Do not use for edging, pruning or hedge trimming.

SKeep firm footing and balance. Do not over- reach.

SKeep all parts of your body away from muffler

and spinning line. Keep engine below waist level. A hot muffler can cause serious burns.

S Cut from your left to your right. Cutting on right side of the shield will throw debris away from the operator.

SUse only in daylight or good artificial light. S Use only for jobs explained in this manual.

TRANSPORTING AND STORAGE

SAllow engine to cool before storing or trans-

porting in vehicle.

SEmpty the fuel tank before storing or trans-

porting the unit. Use up fuel left in the carbu- retor by starting the engine and letting it run until it stops.

SStore unit and fuel in area where fuel vapors cannot reach sparks or open flames from

water heaters, electric motors or switches, furnaces, etc.

SStore unit so line limiter blade cannot acci- dentally cause injury. The unit can be hung by the shaft.

SStore unit out of reach of children.

WARNING: The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

SAFETY NOTICE: Exposure to vibrations through prolonged use of gasoline powered hand tools could cause blood vessel or nerve damage in the fingers, hands, and joints of people prone to circulation disorders or abnor- mal swellings. Prolonged use in cold weather has been linked to blood vessel damage in otherwise healthy people. If symptoms occur such as numbness, pain, loss of strength, change in skin color or texture, or loss of feeling in the fingers, hands, or joints, discontinue the use of this tool and seek medical attention. An anti--vibration system does not guarantee the avoidance of these problems. Users who oper-

P4500F, 545186897 specifications

The Poulan P4500F is a robust, high-performance gas-powered chainsaw that caters to both professional and amateur users. Designed for versatility and efficiency, it stands out as an ideal tool for tasks ranging from light pruning to more demanding cutting jobs.

One of the key features of the Poulan P4500F is its powerful 50cc, 2-cycle engine. This engine delivers ample power to easily tackle tough cutting tasks, while still being lightweight enough for extended use without excessive fatigue. The chainsaw is equipped with a 16-inch cutting bar, providing the perfect balance of size and maneuverability, allowing users to seamlessly navigate through various types of wood.

The P4500F incorporates several advanced technologies to enhance performance and user experience. The Easy Start System minimizes the effort required to pull the starter cord, making it easier to get the chainsaw up and running. This is especially beneficial for users who may struggle with traditional pull-start mechanisms. The chainsaw also integrates an automatic oiler, ensuring that the chain remains lubricated during operation, which not only extends the life of the chain but also enhances cutting efficiency.

In addition to its operational features, the Poulan P4500F is designed with user comfort and safety in mind. The rubberized grip handle provides excellent control and reduces vibration, which helps diminish user fatigue during prolonged use. The chainsaw is also equipped with a chain brake mechanism, which activates quickly in the event of kickback, helping to protect the operator from potential injury.

Furthermore, the P4500F features a tool-less air filter access, simplifying the maintenance process. Users can easily clean or replace the air filter without the need for additional tools, making regular upkeep straightforward and efficient.

Overall, the Poulan P4500F, model number 545186897, is a reliable chainsaw that combines power, technology, and user-friendly features. Whether you are a seasoned professional or a weekend warrior, this chainsaw is designed to deliver excellent performance, making it a valuable addition to any tool collection. Its thoughtful engineering caters to the needs of those looking for a balance between power, ease of use, and maintenance, ensuring that it remains a trustworthy partner in all cutting endeavors.