Poulan 545186897, P4500F Limited Warranty, Troubleshooting Table Cause Remedy, Canada, contact

Page 12

TROUBLESHOOTING TABLE

WARNING: Always stop unit and disconnect spark plug before performing all of the recommended remedies below except remedies that require operation of the unit.

 

TROUBLE

CAUSE

REMEDY

 

Engine will not

1. Engine flooded.

1.

See “Starting a Flooded Engine” in

 

start.

 

 

 

Operation Section.

 

 

2. Fuel tank empty.

2.

Fill tank with correct fuel mixture.

 

 

3. Spark plug not firing.

3.

Install new spark plug.

 

 

4. Fuel not reaching

4.

Check for dirty fuel filter; replace.

 

 

 

carburetor.

 

Check for kinked or split fuel line;

 

 

 

 

 

repair or replace.

 

 

5. Carburetor requires

5.

Contact an authorized service dealer.

 

 

 

adjustment.

 

 

 

 

 

 

 

 

 

Engine will

1.

Carburetor requires

1.

See “Carburetor Idle Speed Adjustment”

 

not idle

 

adjustment.

 

in Service and Adjustments Section.

 

properly.

2.

Crankshaft seals worn.

2.

Contact an authorized service dealer.

 

 

3.

Compression low.

3.

Contact an authorized service dealer.

 

Engine will not

1.

Air filter dirty.

1.

Clean or replace air filter.

 

accelerate,

2. Spark plug fouled.

2.

Clean or replace plug

 

lacks power,

3.

Carburetor requires

 

and regap.

 

or dies under

3.

Contact an authorized service dealer.

 

a load.

4.

adjustment.

4.

Contact an authorized service dealer.

 

 

Carbon build-up on

 

 

 

muffler outlet screen.

 

 

 

 

5.

Compression low.

5.

Contact an authorized service dealer.

 

Engine

1.

Fuel mixture incorrect.

1.

Empty fuel tank and refill with

 

smokes

 

 

 

correct fuel mixture.

 

excessively.

2.

Air filter dirty.

2.

Clean or replace air filter.

 

 

3.

Carburetor requires

3.

Contact an authorized service dealer.

 

 

 

adjustment.

 

 

 

Engine runs

1. Fuel mixture incorrect.

1.

See “Fueling Engine” in Operation

 

hot.

2. Spark plug incorrect.

2.

section.

 

 

Replace with correct spark plug.

 

 

3. Carburetor requires

3.

Contact an authorized service dealer.

 

 

 

adjustment.

 

 

 

 

4. Carbon build-up on

4.

Contact an authorized service dealer.

 

 

 

muffler outlet screen.

 

 

LIMITED WARRANTY

Poulan, a division of Husqvarna Consumer Outdoor Products, N.A., Inc., warrants to the original consumer purchaser that each new Poulan brand gasoline tool or attachment is free from defects in material and workmanship and agrees to repair or replace under this war- ranty any defective gasoline product or attach- ment as follows from the original date of pur- chase.

2 YEARS - Parts and Labor, when used for household purposes.

90 DAYS - Parts and Labor, when used for commercial, professional, or income producing purposes.

30 DAYS - Parts and Labor, if used for rental purposes.

This warranty is not transferable and does not cover damage or liability caused by improper handling, improper maintenance or alteration, or the use of accessories and/or attachments not specifically recommended by Poulan for this tool. This warranty does not cover tune--up,

spark plugs, filters, starter ropes, cutting line, or rotating head parts that will wear and require re- placement with reasonable use during the war- ranty period. This warranty does not cover pre-- delivery setup or normal adjustments explained in the instruction manual. This warranty does not cover transportation costs.

In the event you have a claim under this warran- ty, you must return the product to an authorized service dealer.

Should you have any unanswered questions concerning this warranty, please contact: Poulan, a division of Husqvarna Consumer Outdoor Products N.A., Inc.

1030 Stevens Creek Road Augusta, GA 30907 1--800--554--6723

In Canada, contact:

Poulan

850 Matheson Blvd. West

Mississauga, Ontario L5V 0B4

12

Image 12
Contents Manual de Instrucciones Manuel d’Instructions Table of Contents Identification of Safety SymbolsSafety Rules Instruction Manual Safety Information on the UnitOperator Safety Unit / Maintenance SafetyFuel Safety Cutting SafetyAssembly Adjusting the HandleAttaching Shield Condition of this toolOperation HOW to Stop Your Unit HOW to Start Your UnitStarting a Warm Engine Starting a Flooded EngineOperating Position Cutting MethodsMaintenance Service and Adjustments Carburetor Idle Speed AdjustmentReplacing the Line Replacing the Cutting HeadSeasonal Storage Fuel SystemEngine OtherLimited Warranty Troubleshooting Table Cause RemedyCanada, contact Matheson Blvd. West Mississauga, Ontario L5V 0B4Page Ment and Repair of Emission

P4500F, 545186897 specifications

The Poulan P4500F is a robust, high-performance gas-powered chainsaw that caters to both professional and amateur users. Designed for versatility and efficiency, it stands out as an ideal tool for tasks ranging from light pruning to more demanding cutting jobs.

One of the key features of the Poulan P4500F is its powerful 50cc, 2-cycle engine. This engine delivers ample power to easily tackle tough cutting tasks, while still being lightweight enough for extended use without excessive fatigue. The chainsaw is equipped with a 16-inch cutting bar, providing the perfect balance of size and maneuverability, allowing users to seamlessly navigate through various types of wood.

The P4500F incorporates several advanced technologies to enhance performance and user experience. The Easy Start System minimizes the effort required to pull the starter cord, making it easier to get the chainsaw up and running. This is especially beneficial for users who may struggle with traditional pull-start mechanisms. The chainsaw also integrates an automatic oiler, ensuring that the chain remains lubricated during operation, which not only extends the life of the chain but also enhances cutting efficiency.

In addition to its operational features, the Poulan P4500F is designed with user comfort and safety in mind. The rubberized grip handle provides excellent control and reduces vibration, which helps diminish user fatigue during prolonged use. The chainsaw is also equipped with a chain brake mechanism, which activates quickly in the event of kickback, helping to protect the operator from potential injury.

Furthermore, the P4500F features a tool-less air filter access, simplifying the maintenance process. Users can easily clean or replace the air filter without the need for additional tools, making regular upkeep straightforward and efficient.

Overall, the Poulan P4500F, model number 545186897, is a reliable chainsaw that combines power, technology, and user-friendly features. Whether you are a seasoned professional or a weekend warrior, this chainsaw is designed to deliver excellent performance, making it a valuable addition to any tool collection. Its thoughtful engineering caters to the needs of those looking for a balance between power, ease of use, and maintenance, ensuring that it remains a trustworthy partner in all cutting endeavors.