Poulan 545186897, P4500F instruction manual Operation

Page 6

OPERATION

KNOW YOUR TRIMMER

READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.

Trimmer

Shaft

 

Assist Handle

 

Muffler

Head

 

Safety Label

Shaft Mark or Arrow

 

 

Shield

Spark Plug

 

 

 

 

 

 

 

Primer Bulb

Throttle Trigger

 

 

 

 

 

 

 

Line Limiter Blade

 

 

 

 

 

 

 

STOP

 

 

Fuel Mix Fill Cap

 

 

 

Switch

 

 

 

 

Choke Lever

Starter Handle

STOP SWITCH

CHOKE

 

 

The STOP switch is used to stop the engine. To

The CHOKE helps to supply fuel to the engine

stop the engine, push and hold the switch in the

to aid in cold starting. Activate the choke by

STOP position until the engine stops.

moving the choke lever to the FULL CHOKE

PRIMER BULB

position. After the engine attempts to start, move

The PRIMER BULB removes air from the car-

the choke lever to the HALF CHOKE position.

buretor and fuel lines and fills them with fuel.

Once engine has started, move the choke lever

This allows you to start the engine with fewer

to the RUN position.

pulls on the starter rope. Activate the primer

 

 

 

bulb by pressing it and allowing it to return to

 

 

 

its original form.

 

 

 

BEFORE STARTING ENGINE

instructions printed on container. Once oil is

WARNING: Be sure to read the fuel

added to gasoline, shake container momentarily

to assure that the fuel is thoroughly mixed.

information in the safety rules before you be-

Always read and follow the safety rules relating

gin. If you do not understand the safety rules,

to fuel before fueling your unit.

do not attempt to fuel your unit. Call

CAUTION:

Never use straight gasoline in

1-800-554--6723.

 

your unit. This will cause permanent engine

FUELING ENGINE

damage and void the limited warranty.

WARNING: Remove fuel cap slowly

FUEL REQUIREMENTS

This engine requires the use of minimum 87

when refueling.

octane [R+M]/2 clean gasoline.

HELPFUL TIP

 

IMPORTANT

 

Use of alcohol blended fuels (called gasohol or

To obtain the correct oil mix

 

 

using ethanol or methanol) can cause major en-

ratio, pour 3.2 ounces of

 

 

gine performance and durability problems.

2-cycle synthetic oil into

 

 

 

 

 

one gallon of fresh gas.

 

WARNING: Alternative fuels (not gas-

This engine is certified to operate on unleaded

oline) such as E--15 (15% alcohol), E--20 (20%

gasoline. Before operation, gasoline must be

alcohol), E--85 (85% alcohol) are NOT classified

mixed with a good quality synthetic 2-cycle

as gasoline and are NOT approved for use in

air-cooled engine oil designed to be mixed at a

2--stroke gasoline engines. Use of alternative

ratio of 40:1. Poulan/WEED EATER brand

fuels will cause problems such as: improper

synthetic oil is recommended. Mix gasoline and

clutch engagements, overheating, vapor lock,

oil at a ratio of 40:1. A 40:1 ratio is obtained by

power loss, lubrication deficiency, deterioration

mixing 3.2 fluid ounces (95 ml) of oil with 1 gallon

of fuel lines, gaskets and internal carburetor

(4 liters) of unleaded gasoline. DO NOT USE

components, etc. Alternative fuels cause high

automotive oil or marine oil. These oils will

moisture absorption into the fuel/oil mixture

cause engine damage. When mixing fuel, follow

leading to oil and fuel separation.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Manual de Instrucciones Manuel d’Instructions Table of Contents Identification of Safety SymbolsSafety Rules Instruction Manual Safety Information on the UnitFuel Safety Operator SafetyUnit / Maintenance Safety Cutting SafetyAttaching Shield AssemblyAdjusting the Handle Condition of this toolOperation Starting a Warm Engine HOW to Stop Your UnitHOW to Start Your Unit Starting a Flooded EngineOperating Position Cutting MethodsMaintenance Replacing the Line Service and AdjustmentsCarburetor Idle Speed Adjustment Replacing the Cutting HeadEngine Seasonal StorageFuel System OtherCanada, contact Limited WarrantyTroubleshooting Table Cause Remedy Matheson Blvd. West Mississauga, Ontario L5V 0B4Page Ment and Repair of Emission

P4500F, 545186897 specifications

The Poulan P4500F is a robust, high-performance gas-powered chainsaw that caters to both professional and amateur users. Designed for versatility and efficiency, it stands out as an ideal tool for tasks ranging from light pruning to more demanding cutting jobs.

One of the key features of the Poulan P4500F is its powerful 50cc, 2-cycle engine. This engine delivers ample power to easily tackle tough cutting tasks, while still being lightweight enough for extended use without excessive fatigue. The chainsaw is equipped with a 16-inch cutting bar, providing the perfect balance of size and maneuverability, allowing users to seamlessly navigate through various types of wood.

The P4500F incorporates several advanced technologies to enhance performance and user experience. The Easy Start System minimizes the effort required to pull the starter cord, making it easier to get the chainsaw up and running. This is especially beneficial for users who may struggle with traditional pull-start mechanisms. The chainsaw also integrates an automatic oiler, ensuring that the chain remains lubricated during operation, which not only extends the life of the chain but also enhances cutting efficiency.

In addition to its operational features, the Poulan P4500F is designed with user comfort and safety in mind. The rubberized grip handle provides excellent control and reduces vibration, which helps diminish user fatigue during prolonged use. The chainsaw is also equipped with a chain brake mechanism, which activates quickly in the event of kickback, helping to protect the operator from potential injury.

Furthermore, the P4500F features a tool-less air filter access, simplifying the maintenance process. Users can easily clean or replace the air filter without the need for additional tools, making regular upkeep straightforward and efficient.

Overall, the Poulan P4500F, model number 545186897, is a reliable chainsaw that combines power, technology, and user-friendly features. Whether you are a seasoned professional or a weekend warrior, this chainsaw is designed to deliver excellent performance, making it a valuable addition to any tool collection. Its thoughtful engineering caters to the needs of those looking for a balance between power, ease of use, and maintenance, ensuring that it remains a trustworthy partner in all cutting endeavors.
Top Page Image Contents