Poulan 810 EPT Edger Safety, Vacuum Safety, Pruner Safety Reciprocating Blade, On the attachment

Page 8

EDGER SAFETY

WARNING: Always use handlebar when operating edger attachment. Attach handlebar above arrow on safety label on the upper shaft (motor end of unit). If your edger attachment does not include a handlebar, a handlebar accessory kit (#530071864) is available from your authorized service dealer. Instructions for assembling handlebar to your unit are included in this kit.

SBlade rotates momentarily after the trigger is released. The blade can seriously cut

you or others.

SAllow blade to stop before removing it from the cut.

Handlebar

DANGER: RISK OF CUT. KEEP HANDS AND FEET AWAY FROM BLADE AND CUTTING AREA. Do not attempt to clear away cut material when the blade is in motion. Make sure switch is in the off position and the power source is disconnected when removing jammed material from the cutting blade. Do not grab or hold unit by the cutting blade.Inspect the area to be edged before each use. Re- move objects (rocks, broken glass, nails, wire, etc.) which can be thrown by the blade or can wrap around the shaft.

WARNING: Inspect the area to be edged before each use. Remove objects (rocks, broken glass, nails, wire, etc.) which can be thrown by the blade or can wrap around the shaft.

SHold the unit firmly with both hands.

SKeep firm footing and balance. Do not over- reach or stand on unstable surfaces.

SThrow away blades that are bent, warped, cracked, broken or damaged in any other way. Replace parts that are cracked, chipped, or damaged before using the unit.

SKeep all parts of your body away from the

blade.

S Keep blade guard in place and in good working order.

SAlways keep the wheel in contact with the

ground.

S Always push the unit slowly over the ground. Stay alert for uneven sidewalks, holes in the terrain, large roots, etc.

STo reduce the risk of fire, do not allow exces- sive grass, leaves, or grease to accumulate

on the attachment.

S Objects struck by the cutting member can cause serious injuries to persons. The lawn should always be carefully examined and cleared of all objects prior to edging.

SAVE THESE INSTRUCTIONS

WARNING: Use of any other attach- ments not recommended in this manual may in- crease the risk of injury to persons, fire, or elec- trical shock. Use of attachments not covered under the list of recommended attachments in this manual have not been evaluated for use with this powerhead by Underwriters Laborato- ries (see RECOMMENDED ATTACHMENTS).

WARNING: This unit is not designed for use with a brushcutter attachment.

VACUUM SAFETY

WARNING: Inspect area before starting unit. Remove all debris and hard ob- jects such as rocks, glass, wire, etc. that can ricochet, be thrown, or otherwise cause injury or damage during operation.

S Never place objects inside the vacuum tube(s). Always direct the blowing debris away from people, animals, glass, and solid objects such as trees, automobiles, walls, etc. The force of air can cause rocks, dirt, or sticks to be thrown or to ricochet which can

hurt people or animals, break glass, or cause other damage.

S Never run unit without the proper equip- ment attached. When using your unit as a vacuum, always install vacuum tube(s).

SCheck air intake opening or vacuum tube(s) frequently, always with engine stopped and unit disconnected from power source. Keep vents and tubes free of debris which can ac- cumulate and restrict proper air flow.

PRUNER SAFETY (RECIPROCATING BLADE)

WARNING: The reciprocating blade can cause severe injury. Inspect the unit be- fore use. Do not operate unit with a bent, cracked or dull blade. Keep away from the blade.

WARNING: The reciprocating blade is sharp. Do not touch. To prevent serious injury, always stop engine and ensure blade has stopped moving, disconnect unit from power source, and wear gloves when changing or handling the blade.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Manual de Instrucciones Manuel d’Instructions Identification of Symbols Safety RulesIs necessary when used near children Plan AheadElectrical Safety applies to all attachments Use a voltage supply as shown on unitPlosive vapors can build up Do not use multiple cordsRotational Kickback can occur when Pruner SafetyKickback Kickback Safety Features Line Trimmer SafetyReduce the Chance Kickback Maintain ControlMaintain Your Unit in Good Working Order Transporting and StorageBlower Safety Cultivator SafetyRecommended Attachments For Optional AttachmentsEdger Safety Vacuum SafetyPruner Safety Reciprocating Blade On the attachmentHigh speed causing injury Hedge Trimmer SafetySnow Thrower Safety Assembly Shoulder Strap AssemblyAdjusting the Assist Handle Tools RequiredOperation Installing Optional ATTACH- Ments Installing Attachment HangerAttach the Extension Cord to Your Unit Before Starting UnitPruning Important Points Pruning TechniqueSize limbs or slender material FootTrimmer Line Advance Cutting MethodsRightWrong TrimmingMaintenance Service and Adjustments Chain Adjustment User Replaceable Service PartsReplacing the Line Seasonal StorageTroubleshooting Table Cause Remedy Limited Warranty

810 EPT specifications

The Poulan 810 EPT is a high-performance chainsaw designed for both professional loggers and home landscaping enthusiasts alike. Known for its reliability and durability, this model stands out due to its advanced features and cutting-edge technology.

At the heart of the Poulan 810 EPT is a powerful 81cc, two-stroke engine. This robust engine delivers significant power for cutting through tough wood, making it suitable for heavy-duty tasks. With a guide bar length of up to 20 inches, it provides the ability to tackle big jobs efficiently. The chainsaw’s high speed allows for faster cutting, which is particularly beneficial for clearing trees or trimming large branches.

One of the key features of the Poulan 810 EPT is its EPT (Easy Pull Technology). This innovative system significantly reduces the effort needed to start the engine. It incorporates a spring-assisted starter that makes pull starts smoother and less strenuous. As a result, users can enjoy quicker and easier startups, which is especially advantageous during prolonged use.

Another notable aspect of the Poulan 810 EPT is its anti-vibration technology. This feature minimizes the vibrations felt by the user, leading to increased comfort during operation, even during extended tasks. Prolonged use can be taxing on the hands, but with this technology in place, users can maintain better control and reduce fatigue.

The chainsaw also comes equipped with a tool-less chain tensioning system, allowing for quick and easy adjustments on-the-go. This means that users can tighten or loosen the chain without the need for additional tools, ensuring optimal performance and safety during operation. The chain itself is designed for superior cutting efficiency and is specifically crafted to maintain sharpness for longer periods.

Safety is paramount in chainsaw design, and the Poulan 810 EPT incorporates several safety features. It includes a chain brake that engages instantly to prevent kickback injuries, as well as a throttle lockout to avoid accidental starts. These features are crucial for enhancing user safety while operating the machine.

Overall, the Poulan 810 EPT stands out as a powerful, efficient, and user-friendly chainsaw. With its advanced engine technology, ease of use features, and safety mechanisms, it is an ideal option for those seeking a reliable tool for both professional and personal woodcutting tasks.
Top Page Image Contents