Poulan 810 EPT Chain Adjustment, Replacing the Line, User Replaceable Service Parts

Page 17

12.Now, install bar clamp making sure the adjusting pin is positioned in the lower hole in the guide bar.

Lower

Hole

Adjusting Pin

Guide Bar

13.Install bar clamp nut and finger tighten only. Do not tighten any further at this point. Proceed to the CHAIN ADJUST- MENT section.

CHAIN ADJUSTMENT

See CHECK CHAIN TENSION in MAINTE- NANCE section.

REPLACING THE LINE

(for line trimmer attachment)

1.Remove spool by firmly pulling on tap but- ton.

2.Clean entire surface of hub and spool.

3.Replace with a pre-wound spool, or cut two lengths of 12-1/2 feet of 0.080″ (2 mm) di- ameter Poulan brand line.

WARNING: Never use wire, rope, string, etc., which can break off and become a dangerous missile.

4.Insert ends of the lines about 1/2 inch (1 cm) into the small holes on the inside of spool.

Spool

Small

Holes

Line exit holes

Line in Notch

Hub

Line in Notch

5.Wind the line evenly and tightly onto the spool. Wind in the direction of the arrows found on the spool.

6.Push the lines into the notches, leaving 3 to 5 inches (7 -- 12 cm) unwound.

7.Insert the lines into the the exit holes in the hub as shown in the illustration.

8.Align the notches with the line exit holes.

9.Push spool into hub until it snaps into place.

10.Pull the lines extending outside of the hub to release the lines from the notches.

USER REPLACEABLE SERVICE PARTS

REPLACEMENT PART

PART NUMBER

Assist Handle

530057546

Bolt Carriage, 1/4-20

530015786

Wing Nut

530016152

Bar

530044908

Chain

952051549

Hex Nut

530015917

Oil Cap

530053072

Bar Adjusting Screw/Pin Kit

530069110

Handlebar Accessory Kit

530071864

Spool with 0.080″ Trimmer Line

952711616

Shield Assembly

530071964--01

STORAGE

WARNING: Perform the following steps after each use.

S Stop the unit and disconnect the power source when not in use.

SCarry the unit with motor stopped.

SAllow motor to cool before storing or trans- porting.

SStore unit and extension cord indoors in a

high, dry place out of the reach of children. Store unit unplugged.

SStore unit with all guards in place and position unit so that any sharp object cannot acciden- tally cause injury.

SEASONAL STORAGE

Prepare your unit for storage at the end of the season or if it will not be used for 30 days or more.

If your unit is to be stored for a period of time:

SClean it thoroughly before lengthy storage. S Store in a clean dry area.

S Lightly oil external metal surfaces and guide bar.

S Oil the chain and wrap it in heavy paper or cloth.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Manual de Instrucciones Manuel d’Instructions Safety Rules Identification of SymbolsIs necessary when used near children Plan AheadUse a voltage supply as shown on unit Electrical Safety applies to all attachmentsPlosive vapors can build up Do not use multiple cordsRotational Kickback can occur when Pruner SafetyKickback Line Trimmer Safety Kickback Safety FeaturesReduce the Chance Kickback Maintain ControlTransporting and Storage Maintain Your Unit in Good Working OrderCultivator Safety Blower SafetyRecommended Attachments For Optional AttachmentsVacuum Safety Edger SafetyPruner Safety Reciprocating Blade On the attachmentHigh speed causing injury Hedge Trimmer SafetySnow Thrower Safety Shoulder Strap Assembly AssemblyAdjusting the Assist Handle Tools RequiredOperation Installing Attachment Hanger Installing Optional ATTACH- MentsAttach the Extension Cord to Your Unit Before Starting UnitPruning Technique Pruning Important PointsSize limbs or slender material FootCutting Methods Trimmer Line AdvanceRightWrong TrimmingMaintenance Service and Adjustments User Replaceable Service Parts Chain AdjustmentReplacing the Line Seasonal StorageTroubleshooting Table Cause Remedy Limited Warranty

810 EPT specifications

The Poulan 810 EPT is a high-performance chainsaw designed for both professional loggers and home landscaping enthusiasts alike. Known for its reliability and durability, this model stands out due to its advanced features and cutting-edge technology.

At the heart of the Poulan 810 EPT is a powerful 81cc, two-stroke engine. This robust engine delivers significant power for cutting through tough wood, making it suitable for heavy-duty tasks. With a guide bar length of up to 20 inches, it provides the ability to tackle big jobs efficiently. The chainsaw’s high speed allows for faster cutting, which is particularly beneficial for clearing trees or trimming large branches.

One of the key features of the Poulan 810 EPT is its EPT (Easy Pull Technology). This innovative system significantly reduces the effort needed to start the engine. It incorporates a spring-assisted starter that makes pull starts smoother and less strenuous. As a result, users can enjoy quicker and easier startups, which is especially advantageous during prolonged use.

Another notable aspect of the Poulan 810 EPT is its anti-vibration technology. This feature minimizes the vibrations felt by the user, leading to increased comfort during operation, even during extended tasks. Prolonged use can be taxing on the hands, but with this technology in place, users can maintain better control and reduce fatigue.

The chainsaw also comes equipped with a tool-less chain tensioning system, allowing for quick and easy adjustments on-the-go. This means that users can tighten or loosen the chain without the need for additional tools, ensuring optimal performance and safety during operation. The chain itself is designed for superior cutting efficiency and is specifically crafted to maintain sharpness for longer periods.

Safety is paramount in chainsaw design, and the Poulan 810 EPT incorporates several safety features. It includes a chain brake that engages instantly to prevent kickback injuries, as well as a throttle lockout to avoid accidental starts. These features are crucial for enhancing user safety while operating the machine.

Overall, the Poulan 810 EPT stands out as a powerful, efficient, and user-friendly chainsaw. With its advanced engine technology, ease of use features, and safety mechanisms, it is an ideal option for those seeking a reliable tool for both professional and personal woodcutting tasks.
Top Page Image Contents