Poulan 810 EPT Hedge Trimmer Safety, Snow Thrower Safety, High speed causing injury

Page 9

WARNING: A coasting blade can cause injury while it continues to move after the engine is stopped. Maintain proper control of the unit until the blade has completely stopped mov- ing. Keep hands, face and feet at a distance from all moving parts. Do not attempt to touch or stop the blade when it is moving.

WARNING: For additional information, refer to the safety section of the instruction manual supplied with your pruner attachment.

HEDGE TRIMMER SAFETY

DANGER: RISK OF CUT; KEEP HANDS AWAY FROM BLADE -- Blade moves momentarily after the trigger is re- leased. Do not attempt to clear away cut ma- terial when the blade is in motion. Make sure the unit is disconnected from the power source and the blade has stopped moving be- fore removing jammed material from the cut- ting blade. Do not grab or hold the unit by the cutting blade.

Blades move Allow blades to stop

momentarily before removing

after the

them from the cut.

trigger is

 

released.

 

WARNING: Inspect the area before starting the unit. Remove all debris and hard objects such as rocks, glass, wire, etc. that can ricochet, be thrown, or otherwise cause injury or damage during operation.

S Do not use a cutting blade that is bent, warped, cracked, broken or damaged in any other way. Have worn or damaged parts re- placed by your authorized service dealer.

S Always keep unit in front of your body. Keep all parts of your body away from the cutting blade.

SKeep the cutting blade and air vents clear of debris.

SNOW THROWER SAFETY

WARNING: Keep hands and feet away from the rotor when starting or running the unit. Never attempt to clear the rotor with the motor running. Stop the unit and discon- nect from the power source before unclog- ging snow or debris from discharge chute or when adjusting vanes.

WARNING: Never lean over dis- charge chute. Rocks or debris could be thrown into the eyes and face and cause seri- ous injury or blindness.

WARNING: Inspect the area where the unit is to be used. Remove objects that could be thrown or damage the unit. Some ob- jects may be hidden by fallen snow -- be alert for the possibility.

SDirect material discharge away from glass

enclosures, automobiles, etc.

SDo not run motor at high speed while not re- moving snow.

SBe attentive when using the snowthrower, and stay alert for holes in the terrain and

other hidden hazards.

SMake sure the rotor will spin freely before attaching the snowthrower to the power- head.

SIf the rotor will not rotate freely due to frozen

ice, thaw the unit thoroughly before attempt- ing to operate under power.

SKeep the rotor clear of debris.

SDo not throw snow near other people. The snow thrower could propel small objects at

high speed causing injury.

SAfter striking a foreign object, stop the unit, disconnect from the power source and in-

spect the snowthrower for damage and re- pair if necessary before restarting unit.

SNever operate the snowthrower near glass enclosures, automobiles and trucks.

SNever attempt to use the snowthrower on a

roof.

SNever operate the snowthrower near win-

dow wells, dropoffs, etc.

SNever discharge snow onto public roads or near moving traffic.

SClear snow from slopes by going up and down; never across. Use caution when

changing directions. Never clear snow from steep slopes.

SLet snowthrower run for a few minutes after

clearing snow so moving parts do not freeze.

SLook behind and use care when backing up. Exercise caution to avoid slipping or fal-

ling, especially when operating in reverse.

SKnow how to stop quickly.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Manual de Instrucciones Manuel d’Instructions Safety Rules Identification of SymbolsIs necessary when used near children Plan AheadUse a voltage supply as shown on unit Electrical Safety applies to all attachmentsPlosive vapors can build up Do not use multiple cordsPruner Safety KickbackRotational Kickback can occur when Line Trimmer Safety Kickback Safety FeaturesReduce the Chance Kickback Maintain ControlTransporting and Storage Maintain Your Unit in Good Working OrderCultivator Safety Blower SafetyRecommended Attachments For Optional AttachmentsVacuum Safety Edger SafetyPruner Safety Reciprocating Blade On the attachmentHedge Trimmer Safety Snow Thrower SafetyHigh speed causing injury Shoulder Strap Assembly AssemblyAdjusting the Assist Handle Tools RequiredOperation Installing Attachment Hanger Installing Optional ATTACH- MentsAttach the Extension Cord to Your Unit Before Starting UnitPruning Technique Pruning Important PointsSize limbs or slender material FootCutting Methods Trimmer Line AdvanceRightWrong TrimmingMaintenance Service and Adjustments User Replaceable Service Parts Chain AdjustmentReplacing the Line Seasonal StorageTroubleshooting Table Cause Remedy Limited Warranty

810 EPT specifications

The Poulan 810 EPT is a high-performance chainsaw designed for both professional loggers and home landscaping enthusiasts alike. Known for its reliability and durability, this model stands out due to its advanced features and cutting-edge technology.

At the heart of the Poulan 810 EPT is a powerful 81cc, two-stroke engine. This robust engine delivers significant power for cutting through tough wood, making it suitable for heavy-duty tasks. With a guide bar length of up to 20 inches, it provides the ability to tackle big jobs efficiently. The chainsaw’s high speed allows for faster cutting, which is particularly beneficial for clearing trees or trimming large branches.

One of the key features of the Poulan 810 EPT is its EPT (Easy Pull Technology). This innovative system significantly reduces the effort needed to start the engine. It incorporates a spring-assisted starter that makes pull starts smoother and less strenuous. As a result, users can enjoy quicker and easier startups, which is especially advantageous during prolonged use.

Another notable aspect of the Poulan 810 EPT is its anti-vibration technology. This feature minimizes the vibrations felt by the user, leading to increased comfort during operation, even during extended tasks. Prolonged use can be taxing on the hands, but with this technology in place, users can maintain better control and reduce fatigue.

The chainsaw also comes equipped with a tool-less chain tensioning system, allowing for quick and easy adjustments on-the-go. This means that users can tighten or loosen the chain without the need for additional tools, ensuring optimal performance and safety during operation. The chain itself is designed for superior cutting efficiency and is specifically crafted to maintain sharpness for longer periods.

Safety is paramount in chainsaw design, and the Poulan 810 EPT incorporates several safety features. It includes a chain brake that engages instantly to prevent kickback injuries, as well as a throttle lockout to avoid accidental starts. These features are crucial for enhancing user safety while operating the machine.

Overall, the Poulan 810 EPT stands out as a powerful, efficient, and user-friendly chainsaw. With its advanced engine technology, ease of use features, and safety mechanisms, it is an ideal option for those seeking a reliable tool for both professional and personal woodcutting tasks.
Top Page Image Contents