Poulan 530088847 Troubleshooting Table Cause Remedy, See Carburetor Adjustments

Page 11

TROUBLESHOOTING TABLE

WARNING: Always stop unit and disconnect spark plug before performing any of the recommended remedies below other than remedies that require operation of the unit.

TROUBLE

CAUSE

 

REMEDY

Engine will not

S

Engine flooded.

S

See “Starting.”

start.

S

Fuel tank empty.

S

Fill tank with correct fuel mixture.

 

S

Spark plug not firing.

S

Install new spark plug.

 

S

Fuel not reaching carburetor.

S

Check for dirty fuel filter; replace.

 

 

 

 

Check for kinked or split fuel line;

 

 

 

 

repair or replace.

 

S

Carburetor requires adjustment.

S

See “Carburetor Adjustments.”

Engine will not

S

Carburetor requires adjustment.

S

See “Carburetor Adjustments.”

idle properly.

S

Throttle trigger screw too

S

Loosen screw.

 

 

tight.

 

 

Engine will not

S

Air filter dirty.

S

Clean or replace air filter.

accelerate,

S

Spark plug fouled.

S

Clean or replace spark plug; re-gap.

lacks power,

S

Carburetor requires adjustment.

S

See “Carburetor Adjustments.”

or dies under

 

 

 

 

a load.

 

 

 

 

Engine

S

Fuel mixture incorrect.

S

Empty fuel tank and refill with

smokes

 

Air filter dirty.

 

correct fuel mixture.

excessively.

S

S

Clean or replace air filter.

 

S

Carburetor requires adjustment.

S

See “Carburetor Adjustments.”

Line does not

S

Line improperly routed in head.

S

Check line routing.

advance or

S

Line improperly wound in

S

Rewind line tightly and evenly.

breaks while

 

spool.

 

Use only 0.080” (2 mm) dia. line.

cutting.

S

Line size incorrect.

S

Line welds

S

Line size incorrect.

S

Use only 0.080” (2 mm) dia. line.

onto spool.

S

Incorrect spool.

S

Replace with correct spool.

 

S

Line is being crowded against

S

Cut with tip of line fully extended.

 

 

material being cut.

 

 

Line pulls

S

Too little line outside of head.

S

Remove spool and pull 4 -- 6 inches

back into

 

Line size incorrect.

 

(10 -- 15 cm) of line outside of head.

head.

S

S

Use only 0.080” (2 mm) dia. line.

ELECTROLUX HOME PRODUCTS NORTH AMERICA, Division of WCI Outdoor Prod- ucts, Inc., warrants to the original purchaser that each new Poulan PRO! brand gasoline tool or attachment is free from defects in material and workmanship and agrees to repair or replace un- der this warranty any defective gasoline product or attachment as follows from the original date of purchase.

2YEARS--Parts and Labor, when used for household purposes.

90DAYS--Parts and Labor, when used for commercial, professional, or income produc- ing purposes.

30DAYS--Parts and Labor, if used for rental purposes.

This warranty is not transferable and does not cover damage or liability caused by improper handling, improper maintenance, or the use of accessories and/or attachments not specifically recommended by ELECTROLUX HOME PRODUCTS NORTH AMERICA for this tool. Additionally, this warranty does not cover tune- ups, spark plugs, filters, etc., that will wear and require replacement with reasonable use during the warranty period. This warranty does not cov-

er predelivery setup or normal adjustments ex- plained in the operator’s manual.

THIS WARRANTY GIVES YOU SPECIFIC LE- GAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

NO CLAIMS FOR CONSEQUENTIAL OR OTHER DAMAGES WILL BE ALLOWED, AND THERE ARE NO OTHER EXPRESS WARRANTIES EXCEPT THOSE EX- PRESSLY STIPULATED HEREIN.

SOME STATES DO NOT ALLOW LIMITA- TIONS ON HOW LONG AN IMPLIED WAR- RANTY LASTS OR THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSE- QUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSION MAY NOT APPLY TO YOU.

Frigidaire Home Products’ policy is to continu- ously improve its products. Therefore, ELEC-

TROLUX HOME PRODUCTS NORTH AMERICA reserves the right to change, modify, or discontinue models, designs, specifications, and accessories of all products at any time with- out notice or obligation to any purchaser.

11

Image 11
Contents URL Protection Operator SafetyAlways Wear EyeTransporting and Storage UNIT/MAINTENANCE SafetyFuel Safety Cutting SafetyAttaching the Handlebar Carton ContentsAssembly Tools Required Attaching the TubeAttaching the Control Handle to the Handlebar Configuring Your UnitAssembly Information Trimmer Head Assembly of Shoulder StrapBrush Blade Assembly Information Brush BladeAssembly of the Metal Shield Assembly of the Metal BladeStop HOW to Stop Your UnitStarting Your Engine ON/STOPAdvancing the Trimmer Line Operating PositionStarting a Warm Engine Operating Instructions for USE with Trimmer HeadUse the shoulder strap and keep a firm grip Operating Instructions for USE with Brush BladeReplacing the Line Or othersIgnition Timing Spool ReplacementCarburetor Adjustment Spark PlugHead Use only 0.080 2 mm dia. line Troubleshooting Table Cause RemedySee Carburetor Adjustments Abuse, neglect, or improper maintenance are Coverage This warranty shall be for aReplacement of any warranted part will be Maintenance of your lawn and garden

530088847 specifications

The Poulan 530088847 is an effective and versatile replacement part designed to enhance the performance of your Poulan chainsaw. This component is primarily recognized as an air filter, playing a pivotal role in maintaining the engine’s efficiency and longevity. By ensuring that the air entering the combustion chamber is free from dust, debris, and contaminants, the 530088847 filter promotes optimal engine performance and fuels combustion efficiently.

One of the main features of the Poulan 530088847 is its high-quality filtration capability. The filter is built to capture even the smallest particles, preventing them from entering the engine. This is crucial because dirt and debris can cause considerable damage to the engine over time, leading to reduced performance and potential malfunctions. By using this premium air filter, chainsaw users can enjoy a longer lifespan for their equipment and maintain consistent cutting power.

Another significant characteristic of the Poulan 530088847 is its ease of installation. Designed with the user in mind, this part can be replaced quickly without the need for specialized tools or extensive mechanical knowledge. This user-friendly nature is especially beneficial for individuals who rely heavily on their chainsaws and cannot afford downtime.

Furthermore, the Poulan 530088847 is compatible with a variety of Poulan chainsaw models, making it a versatile option for many users. This compatibility ensures that individuals can find a suitable replacement for their existing air filter, further solidifying the product’s appeal within the chainsaw community.

The materials used in the construction of the Poulan 530088847 are durable and designed to withstand the rigors of outdoor usage. This resilience serves to not only extend the service life of the filter itself but also to enhance the overall reliability of the chainsaw.

Overall, the Poulan 530088847 stands out as a crucial component for maintaining the health and performance of Poulan chainsaws. Its exceptional filtration capabilities, ease of installation, compatibility, and robust construction make it an essential part for any chainsaw owner looking to optimize their equipment's performance. By investing in the 530088847 air filter, users can ensure they achieve the best possible results from their chainsaw while minimizing potential engine issues.