Poulan 530088847 operating instructions HOW to Stop Your Unit, Starting Your Engine, On/Stop

Page 7

plastic protective covering from the threaded shaft before removing the retain- ing washer.

Hex Wrench

Retaining

Dust Cup

 

Washer

 

SInstall the blade over the threaded shaft ex- tending from the gearbox between the dust cup and the retaining washer. Make sure the raised part of the retaining washer is facing the gearbox, and the raised area fits into the

hole in the center of the blade.

S Slide the blade and retaining washer onto the shaft of the gearbox.

S Now place the cupped washer onto the shaft. Make sure the cupped side of the washer is toward the blade.

S Install the blade nut by threading onto the shaft counterclockwise.

S Tighten the blade nut firmly with a wrench while holding hex wrench in position.

SRemove the hex wrench.

S Turn blade by hand. If the blade binds against the shield, or appears to be uneven, the blade is not centered, and you must rein- stall.

NOTE: To remove blade, insert hex wrench into aligned holes. Un-thread nut and remove parts. Be sure to store parts and instructions for future use.

This engine is certified to operate on unleaded gasoline. Gasoline must be mixed with a good quality 2-cycle air-cooled engine oil designed to be mixed at a ratio of 40:1. Poulan/Weed Eater brand oil is recommended. (A 40:1 ratio is ob- tained by mixing 3.2 ounces of oil with 1 gallon of unleaded gasoline). When mixing fuel follow the instructions printed on the container. Always read and follow the safety rules under FUEL SAFETY.

Shield

 

 

 

 

Threaded

 

 

 

 

 

Dust Cup

 

 

 

Shaft

 

 

 

Retaining

Blade

Washer

 

 

 

 

Cupped

Washer

Nut

NOTE: Make sure all parts are in place as il- lustrated, and the blade is sandwiched be- tween the dust cup and the retaining washer. There should be no space between the blade and the dust cup or the retaining washer.

SAlign hole in the dust cup with the hole in the

side of the gearbox by rotating the blade.

SInsert a hex wrench into the aligned holes. This will keep the shaft from turning while tightening the blade nut.

HOW TO STOP YOUR UNIT

To stop the engine, move the ON/STOP switch to the STOP position (toward the cut- ting head).

ON/STOP

 

 

 

 

ON

Switch

 

 

 

 

STOP

Throttle Trigger

STARTING YOUR ENGINE

WARNING: The blade or trimmer head will turn while starting the engine. Avoid any contact with the muffler. A hot muffler can cause serious burns.

NOTE: A special feature called the “throttle lock” holds the throttle trigger in the depressed position during starting.

SLock throttle trigger into the starting postion by first pressing the lock--out lever on the top of the control handle. While the lock--out lever is depressed, squeeze and hold the

throttle trigger.

Lock Button

Lock--out Lever

Throttle Trigger

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents URL Protection Operator SafetyAlways Wear EyeTransporting and Storage UNIT/MAINTENANCE SafetyFuel Safety Cutting SafetyAttaching the Handlebar Carton ContentsAssembly Tools Required Attaching the TubeAttaching the Control Handle to the Handlebar Configuring Your UnitAssembly Information Trimmer Head Assembly of Shoulder StrapBrush Blade Assembly Information Brush BladeAssembly of the Metal Shield Assembly of the Metal BladeStop HOW to Stop Your UnitStarting Your Engine ON/STOPAdvancing the Trimmer Line Operating PositionStarting a Warm Engine Operating Instructions for USE with Trimmer HeadUse the shoulder strap and keep a firm grip Operating Instructions for USE with Brush BladeReplacing the Line Or othersIgnition Timing Spool ReplacementCarburetor Adjustment Spark PlugSee Carburetor Adjustments Troubleshooting Table Cause RemedyHead Use only 0.080 2 mm dia. line Abuse, neglect, or improper maintenance are Coverage This warranty shall be for aReplacement of any warranted part will be Maintenance of your lawn and garden

530088847 specifications

The Poulan 530088847 is an effective and versatile replacement part designed to enhance the performance of your Poulan chainsaw. This component is primarily recognized as an air filter, playing a pivotal role in maintaining the engine’s efficiency and longevity. By ensuring that the air entering the combustion chamber is free from dust, debris, and contaminants, the 530088847 filter promotes optimal engine performance and fuels combustion efficiently.

One of the main features of the Poulan 530088847 is its high-quality filtration capability. The filter is built to capture even the smallest particles, preventing them from entering the engine. This is crucial because dirt and debris can cause considerable damage to the engine over time, leading to reduced performance and potential malfunctions. By using this premium air filter, chainsaw users can enjoy a longer lifespan for their equipment and maintain consistent cutting power.

Another significant characteristic of the Poulan 530088847 is its ease of installation. Designed with the user in mind, this part can be replaced quickly without the need for specialized tools or extensive mechanical knowledge. This user-friendly nature is especially beneficial for individuals who rely heavily on their chainsaws and cannot afford downtime.

Furthermore, the Poulan 530088847 is compatible with a variety of Poulan chainsaw models, making it a versatile option for many users. This compatibility ensures that individuals can find a suitable replacement for their existing air filter, further solidifying the product’s appeal within the chainsaw community.

The materials used in the construction of the Poulan 530088847 are durable and designed to withstand the rigors of outdoor usage. This resilience serves to not only extend the service life of the filter itself but also to enhance the overall reliability of the chainsaw.

Overall, the Poulan 530088847 stands out as a crucial component for maintaining the health and performance of Poulan chainsaws. Its exceptional filtration capabilities, ease of installation, compatibility, and robust construction make it an essential part for any chainsaw owner looking to optimize their equipment's performance. By investing in the 530088847 air filter, users can ensure they achieve the best possible results from their chainsaw while minimizing potential engine issues.
Top Page Image Contents