Poulan 530088847 UNIT/MAINTENANCE Safety, Fuel Safety, Cutting Safety, Transporting and Storage

Page 3

S Always use the handlebar and a properly adjusted shoulder strap with a blade (see ASSEMBLY).

UNIT/MAINTENANCE SAFETY

WARNING: Stop unit and disconnect the spark plug before performing mainte- nance (except carburetor adjustments).

S Look for and replace damaged or loose parts before each use. Look for and repair fuel leaks before use. Keep unit in good working condition.

SThrow away blades that are bent, warped, cracked, broken, or damaged in any other way. Replace trimmer head parts that are cracked, chipped, broken, or damaged in

any other way before using the unit.

S Maintain unit according to recommended procedures. Keep blade sharp. Keep cut- ting line at the proper length.

S Use only 0.080” (2 mm) diameter Poulan PROR brand line. Never use wire, rope, string, etc.

SInstall required shield properly before using the unit. Use the metal shield for all metal

blade use. Use the plastic shield for all line trimmer use.

S Use only specified blade or trimmer head; make sure it is properly installed and se- curely fastened.

S Never start engine with clutch shroud re- moved. The clutch can fly off and cause se- rious injury.

SBe sure blade or trimmer head stops turning when engine idles.

SMake carburetor adjustments with the lower end supported to prevent blade or trimmer

line from contacting any object. Hold unit by hand; do not use the shoulder strap for sup- port.

SKeep others away when making carburetor adjustments.

SUse only recommended Poulan PROR ac- cessories and replacement parts.

S Have all maintenance and service not ex- plained in this manual performed by your Au- thorized Service Dealer.

FUEL SAFETY

SMix and pour fuel outdoors.

SKeep away from sparks or flames. S Use a container approved for fuel.

S Do not smoke or allow smoking near fuel or the unit or while using the unit.

S Avoid spilling fuel or oil. Wipe up all fuel spills before starting engine.

S Move at least 10 feet (3 meters) away from fu- eling site before starting engine.

S Stop engine and allow it to cool before re- moving fuel cap.

S Empty the fuel tank before storing the unit. Use up fuel left in the carburetor by starting the engine and letting it run until it stops.

S Store unit and fuel in area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

S Always store gasoline in a container ap- proved for flammable liquids.

CUTTING SAFETY

WARNING: Inspect the area to be cut before each use. Remove objects (rocks, bro- ken glass, nails, wire, string, etc.) which can be thrown or become entangled in the blade or trimmer head.

SKeep others including children, animals, by- standers, and helpers at least 50 feet (15 me-

ters) away. Stop engine immediately if you are approached.

SAlways keep engine on the right-hand side of your body.

SHold the unit firmly with both hands.

SKeep firm footing and balance. Do not over- reach.

S Keep blade or trimmer head below waist level.

SDo not raise engine above your waist.

SKeep all parts of your body away from blade,

trimmer head, and muffler when engine is running.

SCut from your right to your left.

SUse only in daylight or good artificial light. S Use only for jobs explained in this manual.

TRANSPORTING AND STORAGE

SStop the unit before carrying.

SAllow engine to cool and secure unit before

storing or transporting it in a vehicle.

SEmpty the fuel tank before storing or trans- porting the unit. Use up fuel left in the carbu- retor by starting the engine and letting it run

until it stops.

SStore unit and fuel in an area where fuel va- pors cannot reach sparks or open flames from water heaters, electric motors or switches, fur-

naces, etc.

SStore unit so the blade or line limiter cannot accidentally cause injury. The unit can be hung by the tube.

SStore unit out of reach of children. SAFETY NOTICE: Exposure to vibrations through prolonged use of gasoline powered hand tools could cause blood vessel or nerve damage in the fingers, hands, and joints of people prone to circulation disorders or abnor- mal swellings. Prolonged use in cold weather has been linked to blood vessel damage in otherwise healthy people. If symptoms occur such as numbness, pain, loss of strength, change in skin color or texture, or loss of feel- ing in the fingers, hands, or joints, discontinue the use of this tool and seek medical attention. An anti--vibration system does not guarantee the avoidance of these problems. Users who operate power tools on a continual and regular basis must monitor closely their physical con- dition and the condition of this tool. SPECIAL NOTICE: This unit is equipped with a temperature limiting muffler and spark arresting screen which meets the require- ments of California Codes 4442 and 4443. All U.S. forest land and the states of California, Idaho, Maine, Minnesota, New Jersey, Ore- gon, and Washington require by law that many internal combustion engines be equipped with a spark arresting screen. If you operate in a locale where such regulations exist, you are legally responsible for maintaining the operat-

3

Image 3
Contents URL Protection Operator SafetyAlways Wear EyeTransporting and Storage UNIT/MAINTENANCE SafetyFuel Safety Cutting SafetyAttaching the Handlebar Carton ContentsAssembly Tools Required Attaching the TubeAttaching the Control Handle to the Handlebar Configuring Your UnitAssembly Information Trimmer Head Assembly of Shoulder StrapBrush Blade Assembly Information Brush BladeAssembly of the Metal Shield Assembly of the Metal BladeStop HOW to Stop Your UnitStarting Your Engine ON/STOPAdvancing the Trimmer Line Operating PositionStarting a Warm Engine Operating Instructions for USE with Trimmer HeadUse the shoulder strap and keep a firm grip Operating Instructions for USE with Brush BladeReplacing the Line Or othersIgnition Timing Spool ReplacementCarburetor Adjustment Spark PlugTroubleshooting Table Cause Remedy See Carburetor AdjustmentsHead Use only 0.080 2 mm dia. line Abuse, neglect, or improper maintenance are Coverage This warranty shall be for aReplacement of any warranted part will be Maintenance of your lawn and garden

530088847 specifications

The Poulan 530088847 is an effective and versatile replacement part designed to enhance the performance of your Poulan chainsaw. This component is primarily recognized as an air filter, playing a pivotal role in maintaining the engine’s efficiency and longevity. By ensuring that the air entering the combustion chamber is free from dust, debris, and contaminants, the 530088847 filter promotes optimal engine performance and fuels combustion efficiently.

One of the main features of the Poulan 530088847 is its high-quality filtration capability. The filter is built to capture even the smallest particles, preventing them from entering the engine. This is crucial because dirt and debris can cause considerable damage to the engine over time, leading to reduced performance and potential malfunctions. By using this premium air filter, chainsaw users can enjoy a longer lifespan for their equipment and maintain consistent cutting power.

Another significant characteristic of the Poulan 530088847 is its ease of installation. Designed with the user in mind, this part can be replaced quickly without the need for specialized tools or extensive mechanical knowledge. This user-friendly nature is especially beneficial for individuals who rely heavily on their chainsaws and cannot afford downtime.

Furthermore, the Poulan 530088847 is compatible with a variety of Poulan chainsaw models, making it a versatile option for many users. This compatibility ensures that individuals can find a suitable replacement for their existing air filter, further solidifying the product’s appeal within the chainsaw community.

The materials used in the construction of the Poulan 530088847 are durable and designed to withstand the rigors of outdoor usage. This resilience serves to not only extend the service life of the filter itself but also to enhance the overall reliability of the chainsaw.

Overall, the Poulan 530088847 stands out as a crucial component for maintaining the health and performance of Poulan chainsaws. Its exceptional filtration capabilities, ease of installation, compatibility, and robust construction make it an essential part for any chainsaw owner looking to optimize their equipment's performance. By investing in the 530088847 air filter, users can ensure they achieve the best possible results from their chainsaw while minimizing potential engine issues.