Husqvarna 335R, 333R manual Fitting a blade guard, grass blade and grass cutter

Page 13

ASSEMBLY

Fitting a blade guard, grass blade and grass cutter

	G
	F
	E
	D
A	B
A	C

A

•Hook the blade guard/combination guard (A) onto the ﬁtting on the shaft and secure with the bolt. CAUTION! Ensure that the guard extension is removed.

Use the recommended blade guard. See the Technical data section.

•Fit the drive disc (B) on the output shaft.

•Turn the blade shaft until one of the holes in the drive disc aligns with the corresponding hole in the gear housing.

•Insert the locking pin (C) in the hole to lock the shaft.

•Place the blade (D), support cup (E) and support ﬂange

(F) on the output shaft.

•Fit the nut (G). The nut must be tightened to a torque of 35-50 Nm (3.5-5 kpm). Use the socket spanner in the tool kit. Hold the shaft of the spanner as close to the blade guard as possible. To tighten the nut, turn the spanner in the opposite direction to the direction of rotation (Caution! left-hand thread).

Fitting the blade guard and saw blade

K

J

H

I

A

L

•Remove the mounting plate (H). Fit the adapter (I) and bracket (J) with the two screws (K) as shown. Fit the blade guard (A) to the adapter using the 4 screws (L) as shown.

CAUTION! Use the recommended blade guard. See the Technical data section.

G

F

D

B

C

•Fit the drive disc (B) on the output shaft.

•Turn the blade shaft until one of the holes in the drive disc aligns with the corresponding hole in the gear housing.

•Insert the locking pin (C) in the hole to lock the shaft.

•Place the blade (D) and support ﬂange (F) on the output shaft.

•Fit the nut (G). The nut must be tightened to a torque of 35-50 Nm (3.5-5 kpm). Use the socket spanner in the tool kit. Hold the shaft of the spanner as close to the blade guard as possible. To tighten the nut, turn the spanner in the opposite direction to the direction of rotation (Caution! left-hand thread).

English – 13

Image 13

Contents 333R 335RX-series Symbols KEY to SymbolsContents Dear customer IntroductionWhat is what on the clearing saw? What is WHAT?Personal protective equipment General Safety PrecautionsStop switch Machine′s safety equipmentThrottle lock Cutting attachment guardQuick release Vibration damping systemMufﬂer Locking nut Cutting equipmentSharpening grass cutters and grass blades Cutting equipmentSharpening the saw blade Trimmer head Assembling the handlebar and throttle AssemblyFitting blades and trimmer heads Fitting the guard extensionFitting the blade guard and saw blade Fitting a blade guard, grass blade and grass cutterFitting a trimmer guard and Superauto II 1 trimmer head Fitting other guards and cutting attachmentsStandard harness Adjusting the harness and clearing sawSpreading the load on your shoulders Correct heightFuel Handling Fuel safetyFuel Mixing FuelingCheck before starting Starting and StoppingStarting and stopping StartingStopping For throttle handles with a start throttle lockWorking Techniques Basic safety rulesGeneral working instructions ABC of clearingWorking methods Forestry clearing using a saw bladeBrush cutting with a saw blade Grass clearing using a grass bladeGrass trimming with a trimmer head Clearing Carburetor MaintenanceAdjusting the start throttle speed Correctly adjusted carburetorMufﬂer High speed jet HCooling system Cleaning the air ﬁlterBevel gear Air ﬁlterSharpening grass cutters and grass blades Spark plugSharpening the saw blade Maintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical DataApproved accessories Type Cutting attachment guard, Art. no Your Warranty Rights and Obligations Federal Emission Control Warranty StatementSuper Auto Super Auto II Page S35 25 m T35 Page ´z+HAe¶5f¨ Page 1140336-95 ´z+HAe¶5f¨ ´z+HAe¶5f¨