Contents

Contents
KEY TO SYMBOLS
Symbols	2
CONTENTS
Contents	3
Note the following before starting:	3
INTRODUCTION
Dear customer!	4
WHAT IS WHAT?
What is what on the clearing saw?	5
GENERAL SAFETY PRECAUTIONS
Important	6
Personal protective equipment	6
Machine′s safety equipment	7
Cutting equipment	9
ASSEMBLY
Assembling the handlebar and throttle	12
Fitting blades and trimmer heads	12
Fitting the guard extension	12
Fitting a blade guard, grass blade and grass cutter	13
Fitting the blade guard and saw blade	13
Fitting a trimmer guard and Superauto II 1" trimmer
head	14
Fitting other guards and cutting attachments	14
Adjusting the harness and clearing saw	15
Standard harness	15
FUEL HANDLING
Fuel safety	16
Fuel	16
Fueling	17
STARTING AND STOPPING
Check before starting	18
Starting and stopping	18
WORKING TECHNIQUES
General working instructions	20
MAINTENANCE
Carburetor	24
Mufﬂer	25
Cooling system	26
Bevel gear	26
Air ﬁlter	26
Spark plug	27
Sharpening grass cutters and grass blades	27
Sharpening the saw blade	27
Maintenance schedule	28
TECHNICAL DATA
Technical data	29
FEDERAL EMISSION CONTROL WARRANTY
STATEMENT
YOUR WARRANTY RIGHTS AND OBLIGATIONS	31

Note the following before starting:

Long-term exposure to noise can result in permanent hearing impairment. So always use approved hearing protection.

Maintenance, replacement, or repair of the emission control devices and system may be performed by any nonroad engine repair establishment or individual.

WARNING! Under no circumstances may the

!design of the machine be modiﬁed without the permission of the manufacturer. Always use genuine accessories. Non-authorized modiﬁcations and/or accessories can result in serious personal injury or the death of the operator or others.

Your warranty may not cover damage or liability caused by the use of non-authorized accessories or replacement parts.

WARNING! A clearing saw, brushcutter or

!trimmer can be dangerous if used incorrectly or carelessly, and can cause serious or fatal injury to the operator or others. It is extremely important that you read and understand the contents of this operator’s manual.

This label certify that the product has been certiﬁed in accordance with American exhaust requirements EPA 1.

This engine label certiﬁes that the product is certiﬁed in accordance with American exhaust emissions requirements EPA Ph II and CARB Tier II. The Emissions Compliance Period referred to on the emissions Compliance label indicates the number of operating hours for which the engine has been shown to meet Federal and California emisson requirements.

Category C = 50 hours, B = 125 hours, and A = 300 hours.

English – 3