Husqvarna 333R, 335R manual KEY to Symbols

Page 2

KEY TO SYMBOLS

Symbols

WARNING! Clearing saws, brushcutters and trimmers can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others.

Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.

Always wear:

•A protective helmet where there is a risk of falling objects

•Hearing protection

•Approved eye protection

Max. speed of output shaft, rpm

Watch out for thrown objects and ricochets.

The operator of the machine must ensure, while working, that no persons or animals come closer than 15 metres.

Machines ﬁtted with saw blades or grass blades can be thrown violently to the side when the blade comes into contact with a ﬁxed object. The blade is capable of amputating an arm or leg. Always keep people and animals at least 15 metres from the machine.

Arrows which show limits for handle positioning.

Always wear approved protective gloves.

Wear sturdy, non-slip boots.

Only use non-metallic, ﬂexible cutting attachments, i.e. trimmer heads with trimmer cord.

15 m 50FT

15 m 50FT

1.

2.

3.

Starting instructions

4.3

2

1

5.

6.

Other symbols/decals on the machine refer to special certiﬁcation requirements for certain markets.

Switch off the engine by moving the stop switch to the STOP position before carrying out any checks or maintenance.

Always wear approved protective gloves.

Regular cleaning is required.

Visual check.

Approved eye protection must always be used.

2 – English

Image 2

Contents 333R 335RX-series KEY to Symbols SymbolsContents Introduction Dear customerWhat is WHAT? What is what on the clearing saw?General Safety Precautions Personal protective equipmentThrottle lock Machine′s safety equipmentStop switch Cutting attachment guardMufﬂer Vibration damping systemQuick release Cutting equipment Locking nutSharpening the saw blade Cutting equipmentSharpening grass cutters and grass blades Trimmer head Fitting blades and trimmer heads AssemblyAssembling the handlebar and throttle Fitting the guard extensionFitting a blade guard, grass blade and grass cutter Fitting the blade guard and saw bladeFitting other guards and cutting attachments Fitting a trimmer guard and Superauto II 1 trimmer headSpreading the load on your shoulders Adjusting the harness and clearing sawStandard harness Correct heightFuel Fuel safetyFuel Handling Fueling MixingStarting and stopping Starting and StoppingCheck before starting StartingFor throttle handles with a start throttle lock StoppingGeneral working instructions Basic safety rulesWorking Techniques ABC of clearingForestry clearing using a saw blade Working methodsGrass trimming with a trimmer head Grass clearing using a grass bladeBrush cutting with a saw blade Clearing Maintenance CarburetorMufﬂer Correctly adjusted carburetorAdjusting the start throttle speed High speed jet HBevel gear Cleaning the air ﬁlterCooling system Air ﬁlterSharpening the saw blade Spark plugSharpening grass cutters and grass blades Maintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataApproved accessories Type Cutting attachment guard, Art. no Federal Emission Control Warranty Statement Your Warranty Rights and ObligationsSuper Auto Super Auto II Page S35 25 m T35 Page ´z+HAe¶5f¨ Page 1140336-95 ´z+HAe¶5f¨ ´z+HAe¶5f¨