Husqvarna Essential Tips for Properly Using Your Trimmer: Starting, Stopping, and Understanding Choke Position

Page 21

STARTING AND STOPPING

Warm engine

Ignition: Set the stop switch to the start position.

Choke: Set the throttle to the start position by moving the choke control to the choke position and then returning it to its original position.

Primer bulb: Press the air purge repeatedly until fuel begins to ﬁll the bulb. The bulb need not be completely ﬁlled.

WARNING! When the engine is started with

!the choke in either the choke or start throttle positions the cutting attachment will start to rotate immediately.

Starting

Hold the body of the machine on the ground using your left hand (CAUTION! Not with your foot!). Grip the starter handle, slowly pull out the cord with your right hand until you feel some resistance (the starter pawls grip), now quickly and powerfully pull the cord.

Repeat pulling the cord until the engine starts. When the engine starts. return choke control to run position and apply full throttle; the throttle will automatically disengage from the start setting.

CAUTION! Do not pull the starter cord all the way out and do not let go of the starter handle when the cord is fully extended. This can damage the machine.

Stopping

Stop the engine by switching off the ignition.

English – 21

Image 21

Contents 232R 235R Symbols KEY to SymbolsContents Dear customer IntroductionWhat is what? What is WHAT?Personal protective equipment General Safety PrecautionsMachine′s safety equipment Stop switchThrottle lock Vibration damping system Cutting attachment guardQuick release MufﬂerLocking nut Cutting equipmentCutting equipment Sharpening grass cutters and grass bladesSharpening the saw blade Trimmer head Assembly Fitting the handlebar 232RFitting the handlebar 235R Transport position, handlebar Fitting blades and trimmer headsFitting a blade guard, grass blade and grass cutter 232R Fitting the blade guard and saw blade 232R Fitting a blade guard, grass blade and grass cutter 235RFitting the blade guard and saw blade 235R Fitting the trimmer guard and trimmer head Trimmy SII 235R Fitting other guards and cutting attachments 232RFitting other guards and cutting attachments 235R Adjusting the harness and clearing sawSpreading the load on your shoulders Correct heightFuel safety Fuel HandlingFuel Mixing FuelingCheck before starting Starting and StoppingStarting and stopping Cold engineWarm engine StartingStopping Working Techniques Basic safety rulesGeneral working instructions ABC of clearingWorking methods Forestry clearing using a saw bladeGrass clearing using a grass blade Brush cutting with a saw bladeGrass trimming with a trimmer head Clearing Carburetor MaintenanceCorrectly adjusted carburetor MufﬂerHigh speed jet H Cooling system Cleaning the air ﬁlterBevel gear Air ﬁlterSpark plug Maintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical DataTechnical Data Warranty Commencement Date Super Auto Super Auto II Page T35 Trimmy Hit Trimmy Hit Pro Trimmy SII Page S35 ´z+R2¶5n¨ T45 1150185-95 ´z+R2¶5n¨ ´z+R2¶5n¨