Husqvarna 245RX Assembly, Assembling the handlebar and throttle, Transport position, handlebar

Page 20

ASSEMBLY

Assembling the handlebar and throttle

(240R, 245R, 250R)

•Remove the screw at the rear of the throttle handle.

•Slide the throttle handle onto the right side of the handlebar, (see diagram).

•Align the screw hole in the throttle handle with the hole in the handlebar.

•Reﬁt the screw in the hole in the rear of the throttle handle.

•Screw the screw through the handle and handlebar. Tighten it.

•Unscrew the knob from the handlebar mounting.

•Position the handlebar as shown. Fit the mounting components and tighten the knob lightly.

•Put on the harness and hang the machine from the support hook. Now make a ﬁnal adjustment so that the machine is in a comfortable working position when it hangs from the harness.

•Tighten the knob.

Assembling the handlebar and throttle

(245RX, 252RX)

•Unscrew the knob from the handlebar mounting.

•Position the handlebar as shown. Fit the mounting components and tighten the knob lightly.

•Fit the right handle to the handlebar using the screw, washer, sleeve and nut as shown. Tighten.

•Put on the harness and hang the machine from the support hook. Now make a ﬁnal adjustment so that the machine is in a comfortable working position when it hangs from the harness.

Tighten the knob.

Transport position, handlebar

(240R, 245R, 245RX, 250R, 252RX)

•The handlebar can easily be turned to ﬁt along the shaft for easier transportation and storage.

•Loosen the knob. Turn the handlebar clockwise so that the throttle handle rests against the engine.

•Now twist the handlebar around the shaft. Tighten the knob.

•Fit the transport guard to the cutting attachment.

20 – English

Image 20

Contents 240R 245R/RX 250R 252RX 265RX EnglishKEY to Symbols SymbolsContents Safety Instructions Machine′s safety equipmentStop switch Personal protective equipmentCutting attachment guard Vibration damping systemQuick release MufﬂerCutting equipment Locking nutStop switch Quick release Cutting equipment Filing the saw bladeSharpening grass cutters and grass blades Trimmer headGeneral safety precautions Fuel safetyStarting Transport and storageBasic safety rules Adjusting the harness and clearing sawSafety release General working instructionsForestry clearing using a saw blade Basic working techniquesTerms ABC of clearingGrass clearing using a grass blade Brush cutting with a saw bladeGrass trimming with a trimmer head TrimmingWhat is WHAT? What is what on the clearing saw? 240R, 245RWhat is what on the clearing saw? 245RX What is what on the clearing saw? 250R What is what on the clearing saw? 252RX What is what on the clearing saw? 265RX Transport position, handlebar AssemblyAssembling the handlebar and throttle Adjusting the throttle trigger Fitting blades and trimmer headsFitting a blade guard, grass blade and grass cutter Fitting the blade guard and saw bladeAdjusting the harness and clearing saw Standard harnessFitting other guards and cutting attachments Spreading the load on your shouldersAdjusting the harness Triobalance harnessCorrect height Correct balanceFuelling Fuel HandlingFuel Starting and Stopping Check before startingStarting and stopping Cold engineStopping Maintenance CarburettorCorrectly adjusted carburettor MufﬂerCooling system High speed jet HCleaning the air ﬁlter Air ﬁlterBevel gear Oiling the air ﬁlterFiling the saw blade Spark plugSharpening grass cutters and grass blades Maintenance schedule Daily maintenanceWeekly maintenance Monthly maintenanceTechnical Data Technical dataTechnical data 250R 252RX 265RX Engine Technical Data EC-declaration of conformity Applies to Europe onlyAuto Page Page Trimmy SII Page ´z+H1r¶6l¨ 1140178-26