Husqvarna 245RX manual Fitting blades and trimmer heads, Adjusting the throttle trigger

Page 21

ASSEMBLY

Assembling the handlebar and throttle

(265RX)

•Fit the left handlebar in the handlebar mounting.

•Fit the right handle to the handlebar.

•Adjust roughly and tighten the screws slightly.

•Now make a ﬁnal adjustment, with the machine hanging from the harness, to obtain the most comfortable working position. Tighten the screws.

•Make the ﬁnal adjustment to the right handle and lock it in the most comfortable position.

Adjusting the throttle trigger

The throttle trigger can be adjusted to give the best working position. This is done using the Allen screws by the right handle.

Fitting blades and trimmer heads

When ﬁtting the cutting attachment it is extremely important that the raised section on the drive disc/support ﬂange engages correctly in the centre hole of the cutting attachment. If the cutting attachment is ﬁtted incorrectly it can result in serious and/or fatal personal injury.

WARNING! Never use a cutting attachment

!without an approved guard. See the chapter on Technical data. If an incorrect or faulty guard is ﬁtted this can cause serious personal injury.

IMPORTANT! If a saw blade or grass blade are to be used the machine must be equipped with the correct handlebar, blade guard and harness.

English – 21

Image 21

Contents English 240R 245R/RX 250R 252RX 265RXSymbols KEY to SymbolsContents Machine′s safety equipment Safety InstructionsStop switch Personal protective equipmentVibration damping system Cutting attachment guardQuick release MufﬂerLocking nut Cutting equipmentStop switch Quick release Filing the saw blade Cutting equipmentSharpening grass cutters and grass blades Trimmer headFuel safety General safety precautionsStarting Transport and storageAdjusting the harness and clearing saw Basic safety rulesSafety release General working instructionsBasic working techniques Forestry clearing using a saw bladeTerms ABC of clearingBrush cutting with a saw blade Grass clearing using a grass bladeTrimming Grass trimming with a trimmer headWhat is what on the clearing saw? 240R, 245R What is WHAT?What is what on the clearing saw? 245RX What is what on the clearing saw? 250R What is what on the clearing saw? 252RX What is what on the clearing saw? 265RX Assembly Assembling the handlebar and throttleTransport position, handlebar Fitting blades and trimmer heads Adjusting the throttle triggerFitting the blade guard and saw blade Fitting a blade guard, grass blade and grass cutterStandard harness Adjusting the harness and clearing sawFitting other guards and cutting attachments Spreading the load on your shouldersTriobalance harness Adjusting the harnessCorrect height Correct balanceFuel Handling FuelFuelling Check before starting Starting and StoppingStarting and stopping Cold engineStopping Carburettor MaintenanceMufﬂer Correctly adjusted carburettorCooling system High speed jet HAir ﬁlter Cleaning the air ﬁlterBevel gear Oiling the air ﬁlterSpark plug Sharpening grass cutters and grass bladesFiling the saw blade Daily maintenance Maintenance scheduleWeekly maintenance Monthly maintenanceTechnical data Technical DataTechnical data 250R 252RX 265RX Engine Technical Data Applies to Europe only EC-declaration of conformityAuto Page Page Trimmy SII Page ´z+H1r¶6l¨ 1140178-26