Husqvarna 245RX manual Technical Data, Technical data

TECHNICAL DATA

Technical data

Technical data	240R	245R	245RX
Engine
Cylinder displacement, cm3	40,2	44,3	44,3
Cylinder bore, mm	40,0	42,0	42,0
Stroke, mm	32	32	32
Idle speed, rpm	2700	2700	2700
Recommended max. speed, rpm	12500	12500	12500
Speed of output shaft, rpm	9190	9190	9190
Max. engine output, acc. to ISO 8893	1,8/9000	2,0/9000	2,0/9000
Catalytic converter muffler	No	No	No
Ignition system
Manufacturer/type of ignition system	EM/ET	EM/ET	EM/ET
Spark plug	NGK BPMR 7A	NGK BPMR 7A	NGK BPMR 7A
	Champion RCJ 7Y	Champion RCJ 7Y	Champion RCJ 7Y
Electrode gap, mm	0,5	0,5	0,5
Fuel and lubrication system
Manufacturer/type of carburettor	Walbro WT	Walbro WT	Walbro WT
Fuel tank capacity, litre	0,8	0,8	0,8
Weight
Weight without fuel, cutting attachment and guard, kg	8,6	8,6	8,4
Noise emissions
(see note 1)
Sound power level, measured dB(A)	114	112	112
Sound power level, guaranteed LWA dB(A)	114	114	114
Noise levels
(see note 2)
Equivalent noise pressure level at the operator’s ear,
measured according to EN/ISO 11806 and ISO 7917,	100/104	100/104	100/104
dB(A), min./max.:
Vibration levels
Vibration levels at handles, measured according to
EN/ISO 11806 and ISO 7916, m/s2
At idle, left/right handles, min.:	2,1/2,1	2,3/2,7	2,3/2,7
At idle, left/right handles, max.:	2,4/2,8	3,2/3,5	3,2/3,5
At max. speed, left/right handles, min.:	2,9/2,4	3,3/3,5	3,3/3,5
At max. speed, left/right handles, max.:	4,0/3,5	4,8/5,4	4,8/5,4

Note 1: Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/14/EC.

Note 2: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various

working conditions with the following time distribution: 1/2 idling and 1/2 max speed.

NOTE! The noise pressure level at operator’s ear and vibrations on the handles are measured with all the approved cutting attachments for the machine. The table indicates the lowest and highest values.

English – 33