Ryobi P2603 Battery Pack Removal Preparation for Recycling, Transporting and Storing

Page 12

MAINTENANCE

Only the parts shown on the parts list are intended to be repaired or replaced by the customer. All other parts should be replaced at an Authorized Service Center.

BATTERY PACK REMOVAL AND

PREPARATION FOR RECYCLING

WARNING:

Upon removal, cover the battery pack’s terminals with heavy-duty adhesive tape. Do not attempt to destroy or disassemble battery pack or remove any of its components. Lithium-ion and nickel-cadmium batteries must be recycled or disposed of properly. Also, never touch both terminals with metal objects and/or body parts as short circuit may result. Keep away from children. Failure to comply with these warnings could result in fire and/or serious injury.

TRANSPORTING AND STORING

Always place the scabbard on the blade before storing or transporting the hedge trimmer. Use caution to avoid the sharp teeth of the blade.

Clean the hedge trimmer thoroughly before storing. Store the hedge trimmer indoors, in a dry place that is inacces- sible to children. Keep away from corrosive agents such as garden chemicals and de-icing salts.

LUBRICATING THE BLADE

See Figure 7.

WARNING:

Always allow the blades of the hedge trimmer to come to a stop and remove the battery pack before lubricating. Failure to do so could result in accidental starting causing possible serious personal injury.

For easier operation and longer blade life, lubricate the hedge trimmer blade before and after each use.

Remove the battery pack from the hedge trimmer.

Lay the hedge trimmer on a flat surface. Apply light weight machine oil along the edge of the top blade.

NOTE: If you will be using the hedge trimmer for an extended time, it is advisable to oil the blade periodically.

Stop the hedge trimmer.

Remove the battery pack.

Lubricate the hedge trimmer as described above.

Reinstall the battery pack and resume use.

SHARPENING THE BLADE

See Figure 8.

Allow the blades of the hedge trimmer to come to a stop in the position shown. This will allow clearance for the file between the cutter teeth and the guard teeth.

Remove the battery pack from the hedge trimmer.

Clamp the blade assembly in a vise and file the exposed cutting surface of each blade tooth with an 8 in. smooth round file, 1/4 in. or 7/32 in. in diameter. Be sure to retain the original angle of the tooth when filing.

Remove the hedge trimmer from the vise, replace the battery pack, and restart the hedge trimmer. Allow the blades of the hedge trimmer to come to a stop so that the unsharpened edges on the other side of the cutter blade teeth are exposed.

Remove battery pack from hedge trimmer and repeat the sharpening procedure as described above.

CLEANING THE HEDGE TRIMMER

Remove the battery pack.

Slide the scabbard over the blade.

Clean dirt and debris from the body of the hedge trimmer, using a damp cloth with a mild detergent.

NOTE: Do not use any strong detergents on the plastic housing or the handle. They can be damaged by certain aromatic oils such as pine and lemon, and by solvents such as kerosene.

Moisture can cause a shock hazard. Wipe off any moisture with a soft dry cloth.

Use a small brush or the air discharge of a small vacuum cleaner brush to clear dust or debris from the air vents on the motor housing.

STORING THE HEDGE TRIMMER

See Figure 9.

Clean the hedge trimmer thoroughly before storing. Store the hedge trimmer in a dry, well-ventilated place that is inaccessible to children. Keep away from corrosive agents such as garden chemicals and de-icing salts.

Always place the scabbard on the cutting blades before storing.

10 — English

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Save this Manual for Future Reference PileS ET Chargeur Vendus SéparémentPage Iii Table of Contents General Safety Rules Read ALL InstructionsSpecific Safety Rules Battery SafetySymbols Symbol Name ExplanationName Explanation Features AssemblyTo Install / remove Battery Pack OperationApplications Starting And Stopping the Hedge TrimmerMaintenance General MaintenanceCutting Tips See Figures 5Battery Pack Removal Preparation for Recycling Cleaning the Hedge TrimmerTransporting and Storing Lubricating the BladeWarranty Limited Warranty StatementRègles DE Sécurité Générales AVERTISSEMENT Lire Toutes LES Instructions Règles DE Sécurité Particulières Sécurité DES PilesSymbole NOM Désignation / Explication Aura pour conséquences des blessures graves ou mortellesSymboles Caractéristiques AssemblageRetrait / Installation DU Bloc-piles UtilisationAvertissement Démarrage et Arrêt DU TAILLE-HAIESEntretien Conseils de coupeEntretien Général Voir les figures 5 etTransport ET Remisage Lubrification DES LamesAffûtage DE LA Lame Nettoyage DU TAILLE-HAIESGarantie Énoncé DE LA Garantie LimitéeReglas DE Seguridad Generales ¡ADVERTENCIALEA Todas LAS Instrucciones Reglas DE Seguridad Específicas Seguridad EN EL USO DEL Paquete de bateríasSímbolos PeligroAdvertencia PrecauciónSi no se usa la unidad en condiciones secas y no se observan Características ArmadoFuncionamiento UsosPara Desmontar Y Montar EL Paquete DE Baterías Encendido y Apagado Podadora DE SetosMantenimiento Sugerencias para cortarMantenimiento General Vea las figuras 5 yTransporte Y Almacenamiento Lubricación DE LA Hoja DE CorteAfilado DE LA Hoja DE Corte Limpieza DE LA Podadora DE SetosGarantía Declaración DE LA Garantía LimitadaPage Page Manuel D’UTILISATION / Manual DEL Operador TAILLE-HAIES 18 V / Podadora de setos de 18 V P2603Proposition 65 DE L’ÉTAT DE Californie
Related manuals
Manual 34 pages 2 Kb

P2603 specifications

The Ryobi P2603 is a versatile 18V cordless drill/driver designed for both professionals and DIY enthusiasts. This tool features a compact and lightweight design, making it easy to handle in various applications, whether you're working in tight spaces or overhead.

One of the standout features of the Ryobi P2603 is its powerful motor that delivers up to 1,600 RPM and 24,000 BPM, making it suitable for drilling through wood, metal, and plastic. The tool boasts a 1/2-inch keyless chuck, allowing for quick and easy bit changes. This is particularly useful for users who switch between different tasks frequently, ensuring minimal downtime and maximum productivity.

In terms of versatility, the P2603 offers a two-speed transmission which allows users to select between high-speed drilling or high-torque tasks. This flexibility makes it ideal for a variety of projects, from assembling furniture to installing shelves or drilling into harder materials like masonry.

Ergonomics also play a significant role in the design of the P2603. The rubber overmold grip provides comfort and a secure hold, reducing fatigue during extended use. Additionally, the integrated LED light illuminates dark work areas, ensuring that users maintain precision and control, even under less-than-ideal lighting conditions.

An important highlight of the Ryobi P2603 is its compatibility with the Ryobi ONE+ battery platform. This allows users to interchange batteries across over 175 different Ryobi tools, providing a cost-effective solution for those invested in the Ryobi ecosystem. The 18V lithium-ion battery also ensures longer run times and improved performance compared to traditional nickel-cadmium batteries.

Durability is another key characteristic of the Ryobi P2603. Constructed from high-quality materials, this drill/driver is built to withstand the rigors of both professional and home use, ensuring long-lasting performance.

In summary, the Ryobi P2603 is a practical tool that combines power, versatility, and user-friendly design. With its robust features, advanced technology, and compatibility with the Ryobi ONE+ system, it is an excellent choice for anyone looking to tackle a wide range of drilling and driving tasks. Whether you're a seasoned pro or a weekend warrior, the Ryobi P2603 will not disappoint.
Top Page Image Contents