Ryobi BC30 RY30260 manual Operation, Removing the Straight Shaft Grass Deflector and String Head

Page 14

ASSEMBLY

REMOVING THE STRAIGHT SHAFT GRASS DEFLECTOR AND STRING HEAD

See Figures 10 - 13.

Align the slot in the flanged washer with the slot in the gear head.

Place the gear head locking tool through the slot in the flanged washer and gear head.

Remove the string head assembly.

Remove the flanged washer and retain it for the blade installation.

Remove the screw securing the grass deflector.

Remove the grass deflector.

NOTE: Store the string head parts together for later use.

INSTALLING THE TRI-ARC®BLADE AND BRUSHCUTTER GUARD

See Figures 10 - 14.

Install the brushcutter guard. Refer to “Attaching the Brushcutter Guard” earlier in this manual.

Place the flanged washer over the gear head shaft with the hollow side toward the brushcutter guard.

Center the blade on the flanged washer, making sure the blade fits flat and the raised hub of the flanged washer goes through the hole in the blade.

Install the cupped washer with the raised center away from the blade.

Place the blade nut onto the gear head shaft.

Place the gear head locking tool through the slot in the flanged washer and gear head.

Install the blade nut by turning it counterclockwise (left handed threads).

Tighten the blade nut securely and torque to 120 in.lbs. minimum.

GEAR HEAD

FLANGED WASHER

STRING HEAD

ASSEMBLY SLOT

LOOSENTIGHTEN

Fig. 13

GEAR HEAD

FLANGED

WASHER

SLOT

 

 

 

CUPPED

 

BRUSHCUTTER

WASHER

 

 

 

GUARD

BLADE NUT

 

 

Fig. 14

 

 

OPERATION

WARNING:

Do not allow familiarity with tools to make you care- less. Remember that a careless fraction of a second is sufficient to inflict serious injury.

WARNING:

Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury.

WARNING:

Do not use any attachments or accessories not recom- mended by the manufacturer of this tool. The use of attachments or accessories not recommended can result in serious personal injury.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents OPERATOR’S Manual Save this Manual for Future ReferenceTable of Contents IntroductionGeneral Safety Rules Read ALL InstructionsSpecific Safety Rules for BRUSH- Cutter and Blade USE Specific Safety RulesSpecific Safety Rules for Trimmer USE Symbols Symbol Name ExplanationService Features Trigger Lock Primer Starter GripRope FrontAssembly Attaching the Storage Hanger Installing the Power Head to the AttachmentRemoving the Attachment from the Power Head See FigureFront Handle Bolt Wing NUT Clamp Attaching the Front Handle CS30 and SS30Attaching the J Handle BC30 Flat WasherTo Attach the Straight Shaft Grass Deflector SS30 Attaching the Grass DeflectorTo Attach the Curved Shaft Grass Deflector CS30 Attaching the Brushcutter Guard BC30Removing the TRI-ARCBLADE and Brushcutter Guard Attaching the Shoulder Harness BC30Converting from Brushcutter to String Trimmer BC30 Converting from String Trimmer to Brushcutter BC30Removing the Straight Shaft Grass Deflector and String Head Installing the TRI-ARCBLADE and Brushcutter GuardOperation Fueling and Refueling the Trimmer Operating the TrimmerCutting Tips To Advance the Cutting LineTo Advance the Cutting Line Manually Grass Deflector Line Trimming CUT-OFF BladeTRI-ARCBLADE Operating the BrushcutterBlade Thrust Cutting Technique BladeTo Start a Cold Engine Starting and StoppingSee Figures 21 To Stop the EngineSpool Replacement MaintenanceGeneral Maintenance See Figures 24Arrows on Spool Anchor Hole String ReplacementSee Figures 26 First String SlotSpark Plug Replacement Cleaning the Exhaust Port and Muffler Spark ArrestorReplacing and Cleaning AIR Filter Fuel CAPIdle Speed Screw TroubleshootingSpeed. See Figure Warranty This Product WAS Manufactured with a Catalyst MufflerLimited Warranty Statement Maintenance Requirements MANUFACTURER’S Warranty CoverageOWNER’S Warranty Responsibilities CoverageService

BC30 RY30260, SS30 RY30240, CS30 RY30220 specifications

The Ryobi SS30, RY30240, CS30 RY30220, and BC30 RY30260 are a series of versatile outdoor power equipment, each designed to tackle various landscaping and gardening tasks. Renowned for their reliability, these tools combine innovative technology with user-friendly features to enhance the gardening experience.

The Ryobi SS30, a versatile string trimmer, is equipped with a powerful 30cc 2-cycle engine that offers robust performance for trimming grass, weeds, and overgrowth. Its lightweight design ensures ease of maneuverability, while the adjustable dual-line head allows for quick line replacement and increased cutting efficiency. One innovative feature is the Auto Feed Spool, which automatically feeds the cutting line as needed, reducing downtime and enhancing productivity. The SS30 also boasts a 17-inch cutting width, making it ideal for small to medium-sized yards.

The RY30240 is a robust and efficient hedge trimmer designed for precision and versatility. This model incorporates a 40V lithium-ion battery, offering extended run time without the hassle of cords or gas. The dual-action blades help minimize vibrations and ensure clean cuts on branches up to ¾ inch thick. Its ergonomic design includes a rotating handle that allows for comfortable cutting in various angles, making it suitable for both horizontal and vertical trimming tasks. The RY30240 also features a lightweight body, ensuring that users can work for extended periods without fatigue.

The CS30 RY30220 is a chain saw designed for performance and safety. It features a durable 30cc 2-cycle engine combined with a low kickback 12-inch bar, making it perfect for tackling light cutting tasks, such as pruning and light firewood cutting. Safety features, including a chain brake and handguard, prioritize user protection while offering powerful cuts. Additionally, the easy-access chain tensioning system allows for quick adjustments without the need for tools, ensuring continuous work without interruptions.

Lastly, the BC30 RY30260 is a powerful brush cutter that features a robust 30cc 2-cycle engine. Its long feed line allows for effective clearing of stubborn brush and thick grass. The BC30 offers a unique brush cutter blade option for heavier vegetation, providing users with the flexibility to switch between tools depending on the task at hand. The ergonomic design ensures comfort, reducing strain during long hours of tackling tough landscaping jobs.

In conclusion, the Ryobi SS30, RY30240, CS30 RY30220, and BC30 RY30260 each serve as reliable solutions for homeowners and landscaping professionals. Their combination of power, innovative technology, and ergonomic design makes them indispensable tools for maintaining beautiful outdoor spaces.
Top Page Image Contents