Ryobi CS30 RY30220, SS30 RY30240, BC30 RY30260 manual General Safety Rules, Read ALL Instructions

Page 3

GENERAL SAFETY RULES

WARNING:

Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury.

READ ALL INSTRUCTIONS

For safe operation, read and understand all instructions before using this product. Follow all safety instructions. Failure to follow all safety instructions listed below, can result in serious personal injury.

Do not allow children or untrained individuals to use this unit.

Never start or run the engine in a closed or poorly venti- lated area; breathing exhaust fumes can kill.

Clear the work area before each use. Remove all objects such as rocks, broken glass, nails, wire, or string which can be thrown or become entangled in the cutting line or blade.

Wear safety glasses or goggles that are marked to comply with ANSI Z87.1 standard when operating this product.

Wear heavy, long pants, boots, and gloves. Do not wear loose fitting clothing, short pants, sandals, or go barefoot. Do not wear jewelry of any kind.

Product users on United States Forest Service land, and in some states, must comply with fire prevention regulations. This product is equipped with a spark arrestor; however, other user requirements may apply. Check with your federal, state, or local authorities.

Never operate this unit on the operator’s left side.

�Secure long hair above shoulder level to prevent entanglement in moving parts.

�Keep all bystanders, children, and pets at least 50 ft. (15 m) away. Bystanders should be encouraged to wear eye protection.

�Do not operate this unit when you are tired, ill, or under the influence of alcohol, drugs, or medication.

�Do not operate in poor lighting.

�Keep firm footing and balance. Do not overreach. Overreaching can result in loss of balance or exposure to hot surfaces.

�Keep all parts of your body away from any moving part.

�To avoid hot surfaces, never operate the unit with the bottom of the engine above waist level.

�Do not touch area around the muffler or cylinder of the unit, these parts get hot from operation.

Always stop the engine and remove the spark plug wire before making any adjustments or repairs except for carburetor adjustments. Wear your protective equipment and observe all safety instructions. When the unit is turned off, make sure the cutting attachment has stopped before setting the unit down.

Inspect the unit before each use for loose fasteners, fuel leaks, etc. Replace any damaged parts before use.

The string head or blade will rotate during carburetor adjustments.

It has been reported that vibrations from hand-held tools may contribute to a condition called Raynaud’s Syndrome in certain individuals. Symptoms may include tingling, numbness, and blanching of the fingers, usually apparent upon exposure to cold. Hereditary factors, exposure to cold and dampness, diet, smoking, and work practices are all thought to contribute to the development of these symptoms. It is presently unknown what, if any, vibrations or extent of exposure may contribute to the condition. There are measures that can be taken by the operator to possibly reduce the effects of vibration:

a)Keep your body warm in cold weather. When oper- ating the unit wear gloves to keep hands and wrists warm. It is reported that cold weather is a major factor contributing to Raynaud’s Syndrome.

b)After each period of operation, exercise to increase blood circulation.

c)Take frequent work breaks. Limit the amount of exposure per day.

d)Keep the tool well maintained, fasteners tightened, and worn parts replaced.

If you experience any of the symptoms of this condition, immediately discontinue use and see your physician about these symptoms.

Mix and store fuel in a container approved for gasoline.

�Mix fuel outdoors where there are no sparks or flames. Wipe up any fuel spillage. Move 30 ft. (9 m) away from refueling site before starting engine. Slowly remove the fuel cap after stopping engine. Do not smoke when refueling.

Stop the engine and allow to cool before refueling or storing the unit.

Allow the engine to cool; empty the fuel tank and secure the unit from moving before transporting in a vehicle.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Save this Manual for Future Reference OPERATOR’S ManualIntroduction Table of ContentsRead ALL Instructions General Safety RulesSpecific Safety Rules Specific Safety Rules for Trimmer USESpecific Safety Rules for BRUSH- Cutter and Blade USE Symbol Name Explanation SymbolsService Features Front Starter GripRope Trigger Lock PrimerAssembly See Figure Installing the Power Head to the AttachmentRemoving the Attachment from the Power Head Attaching the Storage HangerFlat Washer Attaching the Front Handle CS30 and SS30Attaching the J Handle BC30 Front Handle Bolt Wing NUT ClampAttaching the Brushcutter Guard BC30 Attaching the Grass DeflectorTo Attach the Curved Shaft Grass Deflector CS30 To Attach the Straight Shaft Grass Deflector SS30Converting from String Trimmer to Brushcutter BC30 Attaching the Shoulder Harness BC30Converting from Brushcutter to String Trimmer BC30 Removing the TRI-ARCBLADE and Brushcutter GuardInstalling the TRI-ARCBLADE and Brushcutter Guard OperationRemoving the Straight Shaft Grass Deflector and String Head Operating the Trimmer Fueling and Refueling the TrimmerGrass Deflector Line Trimming CUT-OFF Blade To Advance the Cutting LineTo Advance the Cutting Line Manually Cutting TipsCutting Technique Blade Operating the BrushcutterBlade Thrust TRI-ARCBLADETo Stop the Engine Starting and StoppingSee Figures 21 To Start a Cold EngineSee Figures 24 MaintenanceGeneral Maintenance Spool ReplacementFirst String Slot String ReplacementSee Figures 26 Arrows on Spool Anchor HoleFuel CAP Cleaning the Exhaust Port and Muffler Spark ArrestorReplacing and Cleaning AIR Filter Spark Plug ReplacementTroubleshooting Speed. See FigureIdle Speed Screw This Product WAS Manufactured with a Catalyst Muffler WarrantyLimited Warranty Statement Coverage MANUFACTURER’S Warranty CoverageOWNER’S Warranty Responsibilities Maintenance RequirementsService

BC30 RY30260, SS30 RY30240, CS30 RY30220 specifications

The Ryobi SS30, RY30240, CS30 RY30220, and BC30 RY30260 are a series of versatile outdoor power equipment, each designed to tackle various landscaping and gardening tasks. Renowned for their reliability, these tools combine innovative technology with user-friendly features to enhance the gardening experience.

The Ryobi SS30, a versatile string trimmer, is equipped with a powerful 30cc 2-cycle engine that offers robust performance for trimming grass, weeds, and overgrowth. Its lightweight design ensures ease of maneuverability, while the adjustable dual-line head allows for quick line replacement and increased cutting efficiency. One innovative feature is the Auto Feed Spool, which automatically feeds the cutting line as needed, reducing downtime and enhancing productivity. The SS30 also boasts a 17-inch cutting width, making it ideal for small to medium-sized yards.

The RY30240 is a robust and efficient hedge trimmer designed for precision and versatility. This model incorporates a 40V lithium-ion battery, offering extended run time without the hassle of cords or gas. The dual-action blades help minimize vibrations and ensure clean cuts on branches up to ¾ inch thick. Its ergonomic design includes a rotating handle that allows for comfortable cutting in various angles, making it suitable for both horizontal and vertical trimming tasks. The RY30240 also features a lightweight body, ensuring that users can work for extended periods without fatigue.

The CS30 RY30220 is a chain saw designed for performance and safety. It features a durable 30cc 2-cycle engine combined with a low kickback 12-inch bar, making it perfect for tackling light cutting tasks, such as pruning and light firewood cutting. Safety features, including a chain brake and handguard, prioritize user protection while offering powerful cuts. Additionally, the easy-access chain tensioning system allows for quick adjustments without the need for tools, ensuring continuous work without interruptions.

Lastly, the BC30 RY30260 is a powerful brush cutter that features a robust 30cc 2-cycle engine. Its long feed line allows for effective clearing of stubborn brush and thick grass. The BC30 offers a unique brush cutter blade option for heavier vegetation, providing users with the flexibility to switch between tools depending on the task at hand. The ergonomic design ensures comfort, reducing strain during long hours of tackling tough landscaping jobs.

In conclusion, the Ryobi SS30, RY30240, CS30 RY30220, and BC30 RY30260 each serve as reliable solutions for homeowners and landscaping professionals. Their combination of power, innovative technology, and ergonomic design makes them indispensable tools for maintaining beautiful outdoor spaces.
Top Page Image Contents