Ryobi BC30 RY30260 Operating the Brushcutter, Blade Thrust, Tri-Arcblade, Cutting Technique Blade

Page 17

OPERATION

OPERATING THE BRUSHCUTTER

See Figures 19 - 20.

Hold the brushcutter with your right hand on the rear handle and the your hand on the “J” Barrier Handle. Keep a firm grip with both hands while in operation. Brushcutter should be held at a comfortable position with the rear handle about hip height. Maintain your grip and balance on both feet. Position yourself so that you will not be drawn off balance by the kickback reaction of the cutting blade.

Adjust the shoulder harness to position the brushcutter at a comfortable operating position and to assure that the shoulder harness will reduce the risk of operator contact with the blade.

BLADE THRUST

Exercise extreme caution when using the blade with this unit. Blade thrust is the reaction that may occur when the spinning blade contacts anything it cannot cut. This contact may cause the blade to stop for an instant, and suddenly “thrust” the unit away from the object that was hit. This re- action can be violent enough to cause the operator to lose control of the unit. Blade thrust can occur without warning if the blade snags, stalls, or binds. This is more likely to oc- cur in areas where it is difficult to see the material being cut. For cutting ease and safety, approach the weeds being cut with the brushcutter from the right to the left. In the event an unexpected object or woody stock is encountered, this practice could minimize the blade thrust reaction.

WARNING:

To avoid burns from hot surfaces, never operate unit with the bottom of the engine above waist level.

TRI-ARC®BLADE

The Tri-Arc®blade is suited only for thicker weeds and pulpy stalks. When the blade becomes dull, it can be turned over to extend the life of the blade. Do not sharpen the Tri-Arc®blade.

Use only Tri-Arc®blade, part number AP04105, available at your local retailer.

CUTTING TECHNIQUE - BLADE

WARNING:

Extreme care must be taken when using blades to en- sure safe operation. Read the safety information for safe operation using the blade, refer to Specific Safety Rules for Brushcutter and Blade Use earlier in this manual.

Always hold brushcutter on your right side with both hands when operating. Use a firm grip on both handles.

Maintain your grip and balance on both feet. Position yourself so that you will not be drawn off balance by the kickback reaction of the cutting blade.

Inspect and clear the area of any hidden objects such as glass, rocks, concrete, fencing, wire, wood, metal, etc.

Never use blades near sidewalks, fencing, posts, build- ings or other immovable objects.

Never use a blade after hitting a hard object without first inspecting it for damage. Do not use if any damage is detected.

The unit is used as a scythe, cutting from the right to the left in a broad sweeping action from side to side.

Use only the Tri-Arc® blade. To install any other brand blade or cutting head to this brushcutter can result in serious personal injury.

PROPER

OPERATING

POSITION

Fig. 19

DIRECTION OF ROTATION

CUTTING AREA

Fig. 20

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Save this Manual for Future Reference OPERATOR’S ManualIntroduction Table of ContentsRead ALL Instructions General Safety RulesSpecific Safety Rules for BRUSH- Cutter and Blade USE Specific Safety RulesSpecific Safety Rules for Trimmer USE Symbol Name Explanation SymbolsService Features Rope Starter GripTrigger Lock Primer FrontAssembly Removing the Attachment from the Power Head Installing the Power Head to the AttachmentAttaching the Storage Hanger See FigureAttaching the J Handle BC30 Attaching the Front Handle CS30 and SS30Front Handle Bolt Wing NUT Clamp Flat WasherTo Attach the Curved Shaft Grass Deflector CS30 Attaching the Grass DeflectorTo Attach the Straight Shaft Grass Deflector SS30 Attaching the Brushcutter Guard BC30Converting from Brushcutter to String Trimmer BC30 Attaching the Shoulder Harness BC30Removing the TRI-ARCBLADE and Brushcutter Guard Converting from String Trimmer to Brushcutter BC30Removing the Straight Shaft Grass Deflector and String Head Installing the TRI-ARCBLADE and Brushcutter GuardOperation Operating the Trimmer Fueling and Refueling the TrimmerTo Advance the Cutting Line Manually To Advance the Cutting LineCutting Tips Grass Deflector Line Trimming CUT-OFF BladeBlade Thrust Operating the BrushcutterTRI-ARCBLADE Cutting Technique BladeSee Figures 21 Starting and StoppingTo Start a Cold Engine To Stop the EngineGeneral Maintenance MaintenanceSpool Replacement See Figures 24See Figures 26 String ReplacementArrows on Spool Anchor Hole First String SlotReplacing and Cleaning AIR Filter Cleaning the Exhaust Port and Muffler Spark ArrestorSpark Plug Replacement Fuel CAPIdle Speed Screw TroubleshootingSpeed. See Figure This Product WAS Manufactured with a Catalyst Muffler WarrantyLimited Warranty Statement OWNER’S Warranty Responsibilities MANUFACTURER’S Warranty CoverageMaintenance Requirements CoverageService

BC30 RY30260, SS30 RY30240, CS30 RY30220 specifications

The Ryobi SS30, RY30240, CS30 RY30220, and BC30 RY30260 are a series of versatile outdoor power equipment, each designed to tackle various landscaping and gardening tasks. Renowned for their reliability, these tools combine innovative technology with user-friendly features to enhance the gardening experience.

The Ryobi SS30, a versatile string trimmer, is equipped with a powerful 30cc 2-cycle engine that offers robust performance for trimming grass, weeds, and overgrowth. Its lightweight design ensures ease of maneuverability, while the adjustable dual-line head allows for quick line replacement and increased cutting efficiency. One innovative feature is the Auto Feed Spool, which automatically feeds the cutting line as needed, reducing downtime and enhancing productivity. The SS30 also boasts a 17-inch cutting width, making it ideal for small to medium-sized yards.

The RY30240 is a robust and efficient hedge trimmer designed for precision and versatility. This model incorporates a 40V lithium-ion battery, offering extended run time without the hassle of cords or gas. The dual-action blades help minimize vibrations and ensure clean cuts on branches up to ¾ inch thick. Its ergonomic design includes a rotating handle that allows for comfortable cutting in various angles, making it suitable for both horizontal and vertical trimming tasks. The RY30240 also features a lightweight body, ensuring that users can work for extended periods without fatigue.

The CS30 RY30220 is a chain saw designed for performance and safety. It features a durable 30cc 2-cycle engine combined with a low kickback 12-inch bar, making it perfect for tackling light cutting tasks, such as pruning and light firewood cutting. Safety features, including a chain brake and handguard, prioritize user protection while offering powerful cuts. Additionally, the easy-access chain tensioning system allows for quick adjustments without the need for tools, ensuring continuous work without interruptions.

Lastly, the BC30 RY30260 is a powerful brush cutter that features a robust 30cc 2-cycle engine. Its long feed line allows for effective clearing of stubborn brush and thick grass. The BC30 offers a unique brush cutter blade option for heavier vegetation, providing users with the flexibility to switch between tools depending on the task at hand. The ergonomic design ensures comfort, reducing strain during long hours of tackling tough landscaping jobs.

In conclusion, the Ryobi SS30, RY30240, CS30 RY30220, and BC30 RY30260 each serve as reliable solutions for homeowners and landscaping professionals. Their combination of power, innovative technology, and ergonomic design makes them indispensable tools for maintaining beautiful outdoor spaces.
Top Page Image Contents