Ryobi 990r manual AIR Filter Maintenance, Air Filter, Screws Choke Lever

Page 19

MAINTENANCE AND REPAIR INSTRUCTIONS (Continued)

AIR FILTER MAINTENANCE

NOTE: CLEAN AND RE-OIL THE AIR FILTER EVERY 10 HOURS OF OPERATION. Your unit’s air filter is one of the most important areas to maintain. If it is not maintained, you will void the warranty. Before cleaning, make sure the unit is turned off.

1.Remove the three (3) screws on the carburetor/air filter cover assembly. Remove the air filter cover (Fig. 35).

NOTE: The choke lever should be in the "PARTIAL" position to remove and install the air filter cover.

Screws

Choke Lever

Screw

Fig. 35

2. Remove the air filter (Fig. 36).

Air Filter

Fig. 36

3.Wash the filter in detergent and water (Fig. 37). Rinse the filter thoroughly and allow it to dry.

Fig. 37

4.Apply enough clean SAE 30 oil to saturate the filter (Fig. 38).

Fig. 38

5. Squeeze the filter to spread the oil (Fig. 39).

Fig. 39

6.Reinstall the filter (see Fig. 36), air filter cover and screws (see Fig. 35). Torque the screws to 2.8-3.4 N•m (25-30 in•lb).

NOTE: If the unit is operated without the air filter cover installed, you will void the warranty.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents 990r Introduction Table of Contents California Emission Regulations Safety WarningsFuel and PRE-OPERATIONAL After USE Other Safety WarningsOperational Saftey Warnings for Brush Blade During USESymbol Safety and International SymbolsBrushcutter Safety Adjusting the J-HANDLE Assembly InstructionsInstalling the Shoulder Strap Installing the Brush Blade Blade Locating Installing the Line SpoolMark Operating Split Boom Coupler Installing the Lower Attachment BoomRemoving the Lower Attachment Boom Checking the OIL OIL & Fuel InformationRecommended OIL Type Adding OIL to Crankcase Initial USEUSE of Blended Fuels Changing the OILRecommended Fuel Type Definition of Blended FuelsRope STARTING/STOPPING InstructionsThrottle Trigger PositionDecorative Trimming Adjusting the Trimming Line LengthUsing the Brush Blade Operating InstructionsFrequency Maintenance Required Refer to Maintenance and Repair Instructions Maintenance ScheduleBump Knob Inner Reel Rewinding the Existing ReelCorrect Line to Use Removing the Existing ReelInstalling a Prewound Reel Reinstalling the ReelWinding the Existing Reel Fill Plug Gear Housing ServiceScrews Choke Lever AIR Filter MaintenanceScrew Air FilterFinal High Speed Mixture Needle Adjustment Carburetor AdjustmentAdjusting the Carburetor Air Filter MaintenanceLean Adjust to Midpoint Rich INSPECTING/CLEANING the MufflerRemoving Muffler Torque the screw to 15-20 inlb 1.7-2.2 Nm Inspection and CleaningMuffler Reassembly Checking Spark Arrester ScreenReplacing the Spark Plug Checking / Adjusting Valve to Rocker ARM ClearanceScrew Screws Rocker Arm Valve Flat Feeler Gauge Adjusting NutsEngine Cleaning and StorageSpecifications Cold Torque SpecificationsProblem Cause Action TroubleshootingYour Warranty Rights and Obligations California Emission Control Warranty StatementLimited Two-Year Warranty

990r specifications

The Ryobi 990R is a powerful and versatile cordless tool that has gained popularity among both DIY enthusiasts and professional users alike. Designed to offer convenience and efficiency, this innovative unit is equipped with a range of features that cater to different applications.

One of the standout characteristics of the Ryobi 990R is its powerful motor. With a robust design, it delivers ample torque and speed, enabling users to tackle a variety of tasks, from cutting through tough materials to drilling precise holes. The motor is powered by a high-capacity lithium-ion battery, which is known for its longevity and quick recharge time. This ensures that users can work longer without frequent interruptions, making the 990R an ideal choice for demanding projects.

Another notable feature of the Ryobi 990R is its ergonomic design. Lightweight and easy to maneuver, the unit minimizes user fatigue, especially during extended use. The integrated rubber grip offers enhanced comfort and control, allowing for greater precision when working on intricate tasks. This commitment to user comfort makes it suitable for both novice and experienced users.

The 990R also incorporates advanced technology that enhances its performance. The unit features variable speed settings, allowing users to adjust the tool’s speed according to the task at hand, whether it’s a delicate job or a high-powered application. Additionally, the tool is equipped with a built-in LED light that illuminates the work area, ensuring visibility in dimly lit spaces and improving overall accuracy.

For added versatility, the Ryobi 990R is compatible with a wide range of attachments and accessories. This allows users to customize the tool according to their specific needs, whether they require a drill, sander, or impact driver. The quick-change chuck system further enhances efficiency, enabling users to switch between accessories in seconds.

Durability is another defining characteristic of the Ryobi 990R. Constructed with high-grade materials, it is designed to withstand demanding working conditions without compromising performance. This resilience is crucial for professionals who rely on their tools for everyday use.

In summary, the Ryobi 990R stands out in the crowded tool market due to its powerful motor, ergonomic design, advanced technologies, and durability. Whether for home improvement projects or professional applications, it offers reliability and performance that users can trust. As Ryobi continues to innovate, the 990R remains a solid choice for anyone looking to enhance their toolkit.
Top Page Image Contents