Ryobi 990r manual Replacing the Spark Plug, Checking / Adjusting Valve to Rocker ARM Clearance

Page 23

MAINTENANCE AND REPAIR INSTRUCTIONS (Continued)

REPLACING THE SPARK PLUG

Use a Champion RDZ19H spark plug. Correct air gap is

.025 in (0.635 mm). Remove plug after every 50 hours of operation and check its condition. Allow the engine to cool before removing the spark plug.

1.Stop the engine and pull the wire off of the spark plug.

2.Clean around the spark plug and remove it from the cylinder head.

NOTE: Replace a cracked, fouled or dirty spark plug. Do not sand blast, scrape or clean electrodes because the engine could be damaged by grit entering the cylinder.

3.Set the air gap at .025 in (0.635 mm) using a wire feeler gauge (Fig. 47). Install a correctly gapped spark plug into the cylinder head. Torque to 100-110 in•lb (11.3-12.3 N•m).

.025 in

(0.635 mm)

Fig. 47

CHECKING / ADJUSTING VALVE TO

ROCKER ARM CLEARANCE

Every 50 hours of operation, remove the rocker arm cover and check the valve to rocker arm clearance, using a flat feeler gauge.

NOTE: The engine must be cold when checking or adjusting the clearance.

Check / adjust the clearance as follows:

1.Remove the four (4) screws from the engine cover (Figs. 48 and 49).

2.Remove the engine cover.

Screw

Fig. 48

Screws

Fig. 49

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents 990r Introduction Table of Contents Fuel and PRE-OPERATIONAL Safety WarningsCalifornia Emission Regulations After USE Other Safety WarningsOperational Saftey Warnings for Brush Blade During USESymbol Safety and International SymbolsBrushcutter Safety Installing the Shoulder Strap Assembly InstructionsAdjusting the J-HANDLE Installing the Brush Blade Mark Installing the Line SpoolBlade Locating Removing the Lower Attachment Boom Installing the Lower Attachment BoomOperating Split Boom Coupler Checking the OIL OIL & Fuel InformationRecommended OIL Type Adding OIL to Crankcase Initial USEUSE of Blended Fuels Changing the OILRecommended Fuel Type Definition of Blended FuelsRope STARTING/STOPPING InstructionsThrottle Trigger PositionDecorative Trimming Adjusting the Trimming Line LengthUsing the Brush Blade Operating InstructionsFrequency Maintenance Required Refer to Maintenance and Repair Instructions Maintenance ScheduleBump Knob Inner Reel Rewinding the Existing ReelCorrect Line to Use Removing the Existing ReelWinding the Existing Reel Reinstalling the ReelInstalling a Prewound Reel Fill Plug Gear Housing ServiceScrews Choke Lever AIR Filter MaintenanceScrew Air FilterFinal High Speed Mixture Needle Adjustment Carburetor AdjustmentAdjusting the Carburetor Air Filter MaintenanceRemoving Muffler INSPECTING/CLEANING the MufflerLean Adjust to Midpoint Rich Torque the screw to 15-20 inlb 1.7-2.2 Nm Inspection and CleaningMuffler Reassembly Checking Spark Arrester ScreenScrew Screws Checking / Adjusting Valve to Rocker ARM ClearanceReplacing the Spark Plug Rocker Arm Valve Flat Feeler Gauge Adjusting NutsEngine Cleaning and StorageSpecifications Cold Torque SpecificationsProblem Cause Action TroubleshootingYour Warranty Rights and Obligations California Emission Control Warranty StatementLimited Two-Year Warranty

990r specifications

The Ryobi 990R is a powerful and versatile cordless tool that has gained popularity among both DIY enthusiasts and professional users alike. Designed to offer convenience and efficiency, this innovative unit is equipped with a range of features that cater to different applications.

One of the standout characteristics of the Ryobi 990R is its powerful motor. With a robust design, it delivers ample torque and speed, enabling users to tackle a variety of tasks, from cutting through tough materials to drilling precise holes. The motor is powered by a high-capacity lithium-ion battery, which is known for its longevity and quick recharge time. This ensures that users can work longer without frequent interruptions, making the 990R an ideal choice for demanding projects.

Another notable feature of the Ryobi 990R is its ergonomic design. Lightweight and easy to maneuver, the unit minimizes user fatigue, especially during extended use. The integrated rubber grip offers enhanced comfort and control, allowing for greater precision when working on intricate tasks. This commitment to user comfort makes it suitable for both novice and experienced users.

The 990R also incorporates advanced technology that enhances its performance. The unit features variable speed settings, allowing users to adjust the tool’s speed according to the task at hand, whether it’s a delicate job or a high-powered application. Additionally, the tool is equipped with a built-in LED light that illuminates the work area, ensuring visibility in dimly lit spaces and improving overall accuracy.

For added versatility, the Ryobi 990R is compatible with a wide range of attachments and accessories. This allows users to customize the tool according to their specific needs, whether they require a drill, sander, or impact driver. The quick-change chuck system further enhances efficiency, enabling users to switch between accessories in seconds.

Durability is another defining characteristic of the Ryobi 990R. Constructed with high-grade materials, it is designed to withstand demanding working conditions without compromising performance. This resilience is crucial for professionals who rely on their tools for everyday use.

In summary, the Ryobi 990R stands out in the crowded tool market due to its powerful motor, ergonomic design, advanced technologies, and durability. Whether for home improvement projects or professional applications, it offers reliability and performance that users can trust. As Ryobi continues to innovate, the 990R remains a solid choice for anyone looking to enhance their toolkit.
Top Page Image Contents