Ryobi 990r manual Assembly Instructions, Adjusting the J-HANDLE, Installing the Shoulder Strap

Page 7

ASSEMBLY INSTRUCTIONS

ADJUSTING THE J-HANDLE

The J-handle is shipped completely assembled on Model 990r (Fig. 1). Use the following instructions to adjust the J-handle to the correct operating position.

1.Loosen the four (4) mounting screws on the J-handle. It is not necessary to remove the screws.

2.Slide the J-handle through the clamp until the arrow / white line on the decal touches the clamp assembly (Fig. 2).

3.Position the handle grip as desired (forward and back) and tighten the mounting screws evenly.

Handle Position as Shipped

Fig. 1

Clamp Assembly

Handle

Position

Decal

Fig. 2

Fig. 3

To install the shoulder strap, use the following instructions.

1.Take the end of the shoulder strap without the buckle and push it through the ring on the snap.

2.Loop the strap through the buckle (Fig. 4).

Fig. 4

3.Snap the shoulder strap onto the wire connector (Fig. 5). Adjust the length of the strap as desired.

INSTALLING THE SHOULDER STRAP

Your unit is equipped with a shoulder strap pad. To install the pad onto the shoulder strap, use the following instruc- tions.

1. Wrap the end of the strap over a blunt object, i.e. ruler (Fig. 3).

2.Push the strap through the pad (Fig. 3). Remove the object..

Fig. 5

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 990r Introduction Table of Contents California Emission Regulations Safety WarningsFuel and PRE-OPERATIONAL After USE Other Safety WarningsOperational Saftey Warnings for Brush Blade During USESymbol Safety and International SymbolsBrushcutter Safety Adjusting the J-HANDLE Assembly InstructionsInstalling the Shoulder Strap Installing the Brush Blade Blade Locating Installing the Line SpoolMark Operating Split Boom Coupler Installing the Lower Attachment BoomRemoving the Lower Attachment Boom Checking the OIL OIL & Fuel InformationRecommended OIL Type Adding OIL to Crankcase Initial USEUSE of Blended Fuels Changing the OILRecommended Fuel Type Definition of Blended FuelsRope STARTING/STOPPING InstructionsThrottle Trigger PositionDecorative Trimming Adjusting the Trimming Line LengthUsing the Brush Blade Operating InstructionsFrequency Maintenance Required Refer to Maintenance and Repair Instructions Maintenance ScheduleBump Knob Inner Reel Rewinding the Existing ReelCorrect Line to Use Removing the Existing ReelInstalling a Prewound Reel Reinstalling the ReelWinding the Existing Reel Fill Plug Gear Housing ServiceScrews Choke Lever AIR Filter MaintenanceScrew Air FilterFinal High Speed Mixture Needle Adjustment Carburetor AdjustmentAdjusting the Carburetor Air Filter MaintenanceLean Adjust to Midpoint Rich INSPECTING/CLEANING the MufflerRemoving Muffler Torque the screw to 15-20 inlb 1.7-2.2 Nm Inspection and CleaningMuffler Reassembly Checking Spark Arrester ScreenReplacing the Spark Plug Checking / Adjusting Valve to Rocker ARM ClearanceScrew Screws Rocker Arm Valve Flat Feeler Gauge Adjusting NutsEngine Cleaning and StorageSpecifications Cold Torque SpecificationsProblem Cause Action TroubleshootingYour Warranty Rights and Obligations California Emission Control Warranty StatementLimited Two-Year Warranty

990r specifications

The Ryobi 990R is a powerful and versatile cordless tool that has gained popularity among both DIY enthusiasts and professional users alike. Designed to offer convenience and efficiency, this innovative unit is equipped with a range of features that cater to different applications.

One of the standout characteristics of the Ryobi 990R is its powerful motor. With a robust design, it delivers ample torque and speed, enabling users to tackle a variety of tasks, from cutting through tough materials to drilling precise holes. The motor is powered by a high-capacity lithium-ion battery, which is known for its longevity and quick recharge time. This ensures that users can work longer without frequent interruptions, making the 990R an ideal choice for demanding projects.

Another notable feature of the Ryobi 990R is its ergonomic design. Lightweight and easy to maneuver, the unit minimizes user fatigue, especially during extended use. The integrated rubber grip offers enhanced comfort and control, allowing for greater precision when working on intricate tasks. This commitment to user comfort makes it suitable for both novice and experienced users.

The 990R also incorporates advanced technology that enhances its performance. The unit features variable speed settings, allowing users to adjust the tool’s speed according to the task at hand, whether it’s a delicate job or a high-powered application. Additionally, the tool is equipped with a built-in LED light that illuminates the work area, ensuring visibility in dimly lit spaces and improving overall accuracy.

For added versatility, the Ryobi 990R is compatible with a wide range of attachments and accessories. This allows users to customize the tool according to their specific needs, whether they require a drill, sander, or impact driver. The quick-change chuck system further enhances efficiency, enabling users to switch between accessories in seconds.

Durability is another defining characteristic of the Ryobi 990R. Constructed with high-grade materials, it is designed to withstand demanding working conditions without compromising performance. This resilience is crucial for professionals who rely on their tools for everyday use.

In summary, the Ryobi 990R stands out in the crowded tool market due to its powerful motor, ergonomic design, advanced technologies, and durability. Whether for home improvement projects or professional applications, it offers reliability and performance that users can trust. As Ryobi continues to innovate, the 990R remains a solid choice for anyone looking to enhance their toolkit.
Top Page Image Contents