Ryobi AC04141T instruction sheet Universal pro cut II string head, Installing string head

Page 1

universal pro cut II string head

AC04141T

WARNING:

To reduce the risk of injury, user must read and under- stand the operator’s manual for their string trimmer and this instruction sheet. Always wear eye protection marked to comply with Z87.1 Ensure compatibility and fit before using this accessory. Do not use this accessory if a part is damaged or missing.

When using Ryobi and Homelite string trimmers, no adap- tors are needed. For other brands, see the Adaptor Chart for the proper hardware configuration needed to use the Universal Pro Cut II String Head with your trimmer.

WARNING:

Failure to use the correct adaptor, nut, and spool retainer combination for your trimmer could cause the string head to detach from your trimmer and result in serious personal injury and/or property damage.

installing string head

See Figure 1.

Stop the engine and disconnect the spark plug wire.

Following the instructions in the operator’s manual for your string trimmer, remove the old string head.

Install the string head on the drive shaft until fully

seated­ .

Install the spool retainer and tighten securely.

Install string as described in the next section.

installing string

See Figure 2.

Use monofilament string between .095 in. and .105 in. ­diameter. Use original manufacturer’s replacement string for best performance.

Stop the engine and disconnect the spark plug wire.

Gather two of the pre-cut lengths of trimmer line provided or cut two pieces of trimmer line, in 11 in. lengths.

Insert the strings into the slots located on the sides of the string head. String should be pushed in until approximately­

1 in. protrudes from the holes on the top of the string head.

Remove old string by pulling it from the holes located on the top of the string head.

drive shaft

string

head

spool

retainer

Fig. 1

insert strings through slots until approx. 1 in. protrudes from holes

holeslot

pull strings from holes to remove

hole

slot

Fig. 2

WARNING:

Do not remove screws or disassemble head. If head is opened, compression springs may fly out toward operator and result in serious injury.

 

TECHTRONIC INDUSTRIES NORTH AMERICA, INC.

 

1428 Pearman Dairy Road

 

Anderson, SC 29625, USA

987000-000

Phone 1-800-860-4050

11-12-08 (REV:00)

www.ryobitools.com

Image 1
Contents Installing string Installing string headUniversal pro cut II string head See FigureAdaptor Chart Using the adaptorsInstallation DU FIL Dans LA Tête DE Coupe Installation DE LA Tête DE CoupeTête universelle À Ligne DE Coupe de pro cut AvertissementAvertissement Utilisation DES AdapteursTableau « Adaptateurs » Advertencia Cabezal universal DEL Hilo de pro cutInstalación DEL Cabezal DEL Hilo Instalación DEL HiloUSO DE Adaptadores Modelo Tipo Configuración del adaptadorAdvertencia Tabla de adaptadores

AC04141T specifications

The Ryobi AC04141T is a versatile and powerful tool that has gained a reputation for efficiency and reliability in the world of outdoor power equipment. This model is designed primarily for homeowners and DIY enthusiasts who need a dependable and effective solution for their lawn care and garden maintenance tasks.

One of the standout features of the Ryobi AC04141T is its compatibility with a range of Ryobi's cordless tools, making it an excellent addition to any existing Ryobi lineup. This model is equipped with a 40-volt lithium-ion battery, providing substantial power for an extended runtime. The battery technology is central to its performance, allowing users to enjoy the convenience of cordless operation without sacrificing power or efficiency.

The AC04141T boasts a 14-inch cutting width, which strikes a balance between maneuverability and coverage. This width is ideal for residential lawns, allowing for easier navigation around flower beds and other obstacles while still covering large areas efficiently. The tool also includes an adjustable cutting height feature, which lets users select from multiple height settings to achieve the perfect trim for their yard.

In terms of design, the Ryobi AC04141T emphasizes user comfort and ease of use. The lightweight construction and ergonomic handle make it easy to handle for extended periods, reducing fatigue during those longer yard work sessions. Additionally, the intuitive operation ensures that even novice users can quickly get started without a steep learning curve.

Safety is another significant focus in the design of the Ryobi AC04141T. Equipped with features like a safety switch and an easy-to-use starter mechanism, operators can use the tool with confidence. This model also includes a debris shield to protect users from flying debris, making it safe for various lawn care activities.

Overall, the Ryobi AC04141T represents a robust and user-friendly option for those looking to maintain their gardens efficiently. With its combination of power, adaptability, and user-centric design, it stands out as an excellent choice in the competitive landscape of outdoor power tools. Whether you are trimming hedges, edging pathways, or maintaining lawn health, the Ryobi AC04141T is a tool that delivers exceptional results, making yard work a more enjoyable experience.