OPERATION | |
|
|
OPERATION
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit.
Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a poison gas. Breathing CO can cause unconsciousness, serious injury, or death. Exhaust can cause serious burns. ALWAYS position unit so that exhaust is directed away from your face and body.
Operation of this equipment may create sparks that can start fires. This unit is equipped with a spark arrestor to prevent discharge of hot particles from the engine. Metal cutters can also create sparks if the cutter strikes rocks, metal, or other hard objects. Contact local fire authorities for laws or regulations regarding fire prevention requirements.
Operation With Blades
Blade use DEMANDS specific Brush Cutter configuration. Operation without specified shield, barrier bar or
TO USE | Pro |
| Rigid Plastic |
|
THESE | Grass/Weed |
| Metal Blade | |
BLADES | Blade |
| Grass/Weed Blade |
|
|
|
|
|
|
| Support Handle, w/or | |||
| w/o Barrier Bar |
| Handle | Handle |
|
|
| w/Barrier Bar | w/Barrier Bar |
|
|
|
|
|
You | Plastic Shield |
| Plastic Shield | Metal Shield |
|
|
|
| |
Harness |
| Harness | Harness | |
must |
| |||
|
|
|
| |
install | Upper Plate & |
| Upper Plate | Upper/Lower |
these | Flat Washer |
| & Glide Cup | Blade Plates |
parts! |
|
|
|
|
Hex Nut |
| Hex Nut | Hex Nut | |
|
| |||
|
|
|
|
|
| New Cotter Pin |
| New Cotter Pin | New Cotter Pin |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DO NOT INSTALL BLADES ON GT (CURVED SHAFT) MODEL TRIMMERS.
•Arbor Diameter of Upper Blade Plate must match arbor diameter of blades.
•New cotter pin required each time blade is installed.
•Brush cutters over 16.5 lbs (7.5 kg) dry weight (weight w/o fuel) require a double shoulder harness.
X7532098207 | 15 |
© 2/2014 ECHO Inc.