E N G L I S H
Switching on and off (fig. A)
For your safety, this tool is equipped with a double switching system. This system prevents starting the tool inadvertently and will only allow operation while holding the tool with both hands.
Switching on
◆Squeeze both the front handle switch (1) and the trigger switch (2).
Switching off
◆Release the front handle switch (1) or the trigger switch (2).
Never attempt to lock a switch in the on position.
Hints for optimum use
◆Slightly tilt the tool (up to 15° relative to the line of cut) so that the blade tips point slightly towards the hedge (fig. D). This will cause the blades to cut more effectively.
◆Start by trimming the top of the hedge.
Hold the tool at the desired angle and move it steadily along the line of cut. The
◆In order to obtain a very straight cut, stretch a piece of string along the length of the hedge at the desired height. Use the string as a guideline, cutting just above it.
◆In order to obtain flat sides, cut upwards with the growth. Younger stems move outwards when the blade cuts downwards, causing shallow patches in the hedge.
◆Take care to avoid any foreign objects. Especially avoid hard objects such as metal wire and railings, as these could damage the blades.
◆Regularly oil the blades.
Guidelines for trimming (UK & Ireland)
◆Trim hedges and shrubs with seasonal leaves (new leaves every year) in June and October.
◆Trim evergreens in April and August.
◆Trim conifers and other fast growing shrubs every six weeks from May until October.
Guidelines for trimming (Australia & New Zealand)
◆Trim hedges and shrubs with seasonal leaves (new leaves every year) in December and March.
◆Trim evergreens in September and February.
◆Trim conifers and other fast growing shrubs every six weeks from October until March.
MAINTENANCE
Your Black & Decker tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.
Before performing any maintenance, switch off and unplug the tool.
◆After use, carefully clean the blades.
After cleaning, apply a film of light machine oil to prevent the blades from rusting.
◆Regularly clean the ventilation slots in your tool using a soft brush or dry cloth.
◆Regularly clean the motor housing using a damp cloth. Do not use any abrasive or
PROTECTING THE ENVIRONMENT
Black & Decker provides a facility for recycling Black & Decker products once they have reached the end of their working life. This service is provided free of charge. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf.
You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our
10