Snapper Clean Sweep Twin Catcher manual Install Turbo Blower, Install Turbo Drive Belt

Page 10

Install Turbo Blower

1.Install the turbo unit by sliding the turbo pivot rod into the pivot bracket at the front edge of the mower deck (A, Figure 17).

2.Tilt the deflector UP (B).

3.Rotate the turbo unit (C) into position on the dis- charge of the mower deck, and “latch” the slot in the turbo housing over and onto the anchor bracket at

(D). Tighten the wing nut (E) to secure.

Initial Turbo Installation

E

D

 

C

B

 

A

Figure 17. Install Turbo Blower

 

A. Pivot Bracket

D. Anchor Bracket

B.

Deflector

E. Sleeve Nut

C.

Turbo

 

Install Turbo Drive Belt

1.See Figure 18. Attach the turbo belt to the top RH pulley on the mower deck. Pull back on the belt ten- sioning lever to slacken the belt. A view (from right front of mower) of the belt routing is shown at right.

NOTE: While attaching, it may be necessary to unlatch the turbo and realign the belt on the pulleys inside the turbo housing.

2.After the belt is installed, adjust the belt stop (D, FIgure 11 & 12) so that it is 1/8” away from the back- side of the belt.

Idler

Mower Deck

Turbo Drive Pulley

Pulleys

 

 

Mower Deck

 

Arbor Pulley

To Slacken

FRONT

Belt

 

Turbo Drive

Pulley

Figure 18. Turbo Belt Routing

Secure Belt Cover

1.The belt cover plate (A, Figure 19) is a safety shield

— after attaching or detaching the turbo unit, it MUST BE rotated onto the belt cover latch (B).

CAUTION

Before you begin operating the unit with the Turbo attached, be certain you have read all of the safety and operational information on the last page of this instruction sheet, as well as the Operator’s Manual for the tractor and any grass catchers or other collection devices used in conjunction with this turbo blower.

BA

Figure 19. Belt Cover

A.Belt Cover Plate

B.Belt Cover Latch

9

Image 10
Contents Clean Sweep Twin Catcher OPERATOR’S ManualTable of Contents Safety Rules Information General WarningsGeneral Operating Instructions Installation Install Deflector Hinge Assembly Install Discharge BaffleDeflector Removal Install Deflector ModelsInstall Turbo Drive Pulley Install Idler Assembly & Belt CoverInstall Anchor Bracket Install Turbo Belt Install Belt Cover PlateInstall Mounting Bracket Install Turbo Drive Belt Install Turbo BlowerSecure Belt Cover Initial Counter Balance & Weight Carrier Installation Counter Balance & Weight Carrier InstallationInitial Hitch & Tube Installation Assemble Tubes & Deflector Assemble Catcher BagsInstall Cover and Bags AssemblyInitial Collector Normal Removal Installation Removing the Grass CatcherInstalling the Grass Carcher Removing and Reattaching Grass CatcherHardware Identification & Torque Specifications

Clean Sweep Twin Catcher specifications

The Snapper Clean Sweep Twin Catcher is a revolutionary lawn care tool designed for homeowners and landscaping professionals alike. This innovative product combines cutting-edge technology with user-friendly features to deliver an exceptional mowing experience. The Twin Catcher is specifically engineered to provide superior grass collection and easy operation, making it a must-have for anyone serious about lawn maintenance.

One of the main features of the Snapper Clean Sweep Twin Catcher is its twin bagging system. This dual-bag design enhances the efficiency of grass collection, allowing users to tackle even the most demanding mowing tasks with ease. Each bag is spacious enough to hold a substantial amount of clippings, minimizing the frequency of stops for emptying. The result is a cleaner lawn and more time spent mowing rather than managing clippings.

Incorporating advanced technology, the Twin Catcher offers an exclusive airflow design that optimizes grass suction. This innovative feature ensures that clippings are collected effectively, reducing lawn debris left behind. The clever design also contributes to preventing clogging, a common issue with traditional mowers, that can disrupt mowing operations and lead to frustration.

Another notable characteristic of the Snapper Clean Sweep Twin Catcher is its durability. The robust construction is built to withstand regular use, ensuring longevity and reliability. Users can trust that this mower will maintain peak performance season after season, even under challenging conditions.

Ease of use is a key consideration in the design of the Snapper Twin Catcher. The mower features an adjustable cutting height, allowing users to customize their mowing experience based on lawn type and desired finish. Additionally, the handle design is ergonomically engineered for comfort, reducing fatigue during longer mowing sessions. The lightweight frame makes maneuvering around obstacles a breeze, enhancing overall productivity.

Lastly, the Snapper Clean Sweep Twin Catcher is compatible with a variety of Snapper mowers, making it a versatile addition to any lawn care arsenal. Whether for small residential lawns or larger properties, this tool is equipped to handle diverse landscaping needs. Overall, the Snapper Clean Sweep Twin Catcher stands out as an exceptional mowing solution, combining high performance, innovative technology, and ease of use to achieve perfect lawn care results.