Snapper Clean Sweep Twin Catcher manual Safety Rules Information, General Warnings

Page 3

Safety Rules

& Information

Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. The trian-

gle in text signifies important cautions or warnings which must be followed.

GENERAL WARNINGS

Know the unit’s controls and how to stop quickly.

READ THE OPERATOR’S MANUALS.

Read and obey all safety decals.

Only allow responsible adults, who are familiar with the instructions, to operate the unit.

Disengage the PTO. Shut off the engine and wait for all moving parts to stop before attaching, adjusting, or disconnecting any part of the collection system.

Check the collection system to make sure it is bolted tightly to the unit.

DO NOT operate the unit without either the entire grass catcher or the deflector in place.

Turn off the PTO to disengage the blades when not mowing.

DO NOT mow in reverse. Always look down and behind before and while travelling in reverse.

DO NOT turn sharply when travelling alongside a building or any object. Slow down before turning.

DO NOT carry passengers.

When collection system is removed from the mower deck, the deflector must be properly installed.

Collector bags are subject to deterioration and wear during normal use. Inspect the bag periodically for tears, holes, or weak spots and replace with a new bag that meets manufacturer’s durability standards.

If the mower stalls or the collector chute plugs:

1.Disengage the PTO;

2.Stop the engine and remove the key;

3.Set the parking brake, and wait for all moving parts to stop.

4.Remove the foreign object or clear the chute

with a piece of wood before restarting the engine.

NEVER place hands into COLLECTOR OR MOWER housing to clear jammed objectS. Blower OR MOWER may rotate when object is removed.

For added stability and to prevent tipping or loss of control:

a. Use reduced speed on uneven ground and when turning corners.

b. Reduce loads on hillsides. It is recommended that the collection system be kept only half full when negotiating any slopes. Start mowing on slopes when the collection system is empty.

c. Mow up and down the face of slopes; never across the face of any slope.

When operating on slopes, use front counter- weights. Never operate on slopes greater than 17.6% (10°).

SAFETY DECALS

This unit has been designed and manufactured to pro- vide you with the safety and reliability you would expect from an industry leader in outdoor power equipment manufacturing.

These labels are easily applied and will act as a constant visual reminder to you, and others who may use the equipment, to follow the safety instructions necessary for safe, effective operation.

Although reading this manual and the safety instructions it contains will provide you with the necessary basic knowledge to operate this equipment safely and effec- tively, we have placed several safety labels on the unit to remind you of this important information while you are operating your unit.

All DANGER, WARNING, CAUTION and instructional messages on your rider, attachments and mower should be carefully read and obeyed. Personal bodily injury can result when these instructions are not followed. The information is for your safety and it is important! The safety decals below are on your product.

If any decals are lost or damaged, replace them at once. See your local dealer for replacements.

TP 600-2562-01-AT-SMA

ATTACHMENT DECALS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Decal - WARNING Do Not

 

 

 

 

 

 

Open Cover

Decal - WARNING

Part Number 1704405

Part Number

 

 

 

 

1717291

 

Read and obey all operation and warning decals.

2

Image 3
Contents OPERATOR’S Manual Clean Sweep Twin CatcherTable of Contents General Warnings Safety Rules InformationGeneral Operating Instructions Installation Install Discharge Baffle Install Deflector Hinge AssemblyDeflector Removal Models Install DeflectorInstall Idler Assembly & Belt Cover Install Turbo Drive PulleyInstall Anchor Bracket Install Belt Cover Plate Install Turbo BeltInstall Mounting Bracket Install Turbo Blower Install Turbo Drive BeltSecure Belt Cover Counter Balance & Weight Carrier Installation Initial Counter Balance & Weight Carrier InstallationInitial Hitch & Tube Installation Assemble Catcher Bags Assemble Tubes & DeflectorAssembly Install Cover and BagsInitial Collector Removing the Grass Catcher Normal Removal InstallationRemoving and Reattaching Grass Catcher Installing the Grass CarcherHardware Identification & Torque Specifications

Clean Sweep Twin Catcher specifications

The Snapper Clean Sweep Twin Catcher is a revolutionary lawn care tool designed for homeowners and landscaping professionals alike. This innovative product combines cutting-edge technology with user-friendly features to deliver an exceptional mowing experience. The Twin Catcher is specifically engineered to provide superior grass collection and easy operation, making it a must-have for anyone serious about lawn maintenance.

One of the main features of the Snapper Clean Sweep Twin Catcher is its twin bagging system. This dual-bag design enhances the efficiency of grass collection, allowing users to tackle even the most demanding mowing tasks with ease. Each bag is spacious enough to hold a substantial amount of clippings, minimizing the frequency of stops for emptying. The result is a cleaner lawn and more time spent mowing rather than managing clippings.

Incorporating advanced technology, the Twin Catcher offers an exclusive airflow design that optimizes grass suction. This innovative feature ensures that clippings are collected effectively, reducing lawn debris left behind. The clever design also contributes to preventing clogging, a common issue with traditional mowers, that can disrupt mowing operations and lead to frustration.

Another notable characteristic of the Snapper Clean Sweep Twin Catcher is its durability. The robust construction is built to withstand regular use, ensuring longevity and reliability. Users can trust that this mower will maintain peak performance season after season, even under challenging conditions.

Ease of use is a key consideration in the design of the Snapper Twin Catcher. The mower features an adjustable cutting height, allowing users to customize their mowing experience based on lawn type and desired finish. Additionally, the handle design is ergonomically engineered for comfort, reducing fatigue during longer mowing sessions. The lightweight frame makes maneuvering around obstacles a breeze, enhancing overall productivity.

Lastly, the Snapper Clean Sweep Twin Catcher is compatible with a variety of Snapper mowers, making it a versatile addition to any lawn care arsenal. Whether for small residential lawns or larger properties, this tool is equipped to handle diverse landscaping needs. Overall, the Snapper Clean Sweep Twin Catcher stands out as an exceptional mowing solution, combining high performance, innovative technology, and ease of use to achieve perfect lawn care results.