Snapper Clean Sweep Twin Catcher manual Install Belt Cover Plate, Install Turbo Belt

Page 9

Initial Turbo Installation

B

A 50"44"

Figure 13. Belt Cover Plates

A.Belt Cover Plate for 50” Mower

B.Belt Cover Plate for 44” Mower

WARNING

When the turbo blower assembly is removed from the mower deck, the deflector MUST be properly installed.

Install Belt Cover Plate

1.Attach the belt cover plate (B, Figure 13 & 14) to the support bracket (E) using a 5/16-18 x 1 capscrew (C), washer (D) and nylock nut (F).

NOTE: This cover plate must be able to pivot on the support bracket. Different belt covers are required for different applications. Refer to Figure 13.

2.Rotate the belt cover until the notch catches the idler assembly belt cover latch (A, Figure 14). Cover latch

(A) may need to be rotated for proper alignment.

Install Turbo Belt

1.Locate the correct drive belt for your installation: 44” models require drive belt 1705142, 50” models require drive belt 1707956 (the part number is stamped on the belt).

2.Loosen the hardware securing the drive pulley belt guide (B, Figure 15 & 16) and the idler pulley (C)

3.Install the drive belt as shown in Figures 15 & 16.

4.Tighten the hardware securing the drive pulley belt guide (B) and idler pulley (C). The idler belt guide should be within 1/16” of the belt.

Install Mounting Bracket

1.See Figures 15 & 16. Locate and remove the two longer capscrews used to secure the rear of the turbo housing and idler spring anchor.

2.Install the turbo mounting bracket (A) using the removed hardware. Note that the bracket is mounted in two different positions depending on the applica- tion.

 

B

C

 

 

A

 

D

 

 

 

 

E

 

 

F

Figure 14. Install Belt Cover Plate

A.

Belt Cover Latch

E. Support Bracket

B.

Belt Cover Plate

F. Nylock Nut, 5/16

C.Capscrew, 5/16-18 x 1

D.Washer, 5/16

B

C

D

A

D

Figure 15. Belt Routing - 44” Models

A.Mounting Bracket

B.Drive Pulley Belt Guide Hardware

C.Idler Pulley Hardware

D.Mounting Bracket Hardware

B

C

D

A

D

Figure 16. Belt Routing - 50” Models

A.Mounting Bracket

B.Drive Pulley Belt Guide Hardware

C.Idler Pulley Hardware

D.Mounting Bracket Hardware

8

Image 9
Contents OPERATOR’S Manual Clean Sweep Twin CatcherTable of Contents General Warnings Safety Rules InformationGeneral Operating Instructions Installation Install Discharge Baffle Install Deflector Hinge AssemblyDeflector Removal Models Install DeflectorInstall Idler Assembly & Belt Cover Install Turbo Drive PulleyInstall Anchor Bracket Install Belt Cover Plate Install Turbo BeltInstall Mounting Bracket Install Turbo Blower Install Turbo Drive BeltSecure Belt Cover Counter Balance & Weight Carrier Installation Initial Counter Balance & Weight Carrier InstallationInitial Hitch & Tube Installation Assemble Catcher Bags Assemble Tubes & DeflectorAssembly Install Cover and BagsInitial Collector Removing the Grass Catcher Normal Removal InstallationRemoving and Reattaching Grass Catcher Installing the Grass CarcherHardware Identification & Torque Specifications

Clean Sweep Twin Catcher specifications

The Snapper Clean Sweep Twin Catcher is a revolutionary lawn care tool designed for homeowners and landscaping professionals alike. This innovative product combines cutting-edge technology with user-friendly features to deliver an exceptional mowing experience. The Twin Catcher is specifically engineered to provide superior grass collection and easy operation, making it a must-have for anyone serious about lawn maintenance.

One of the main features of the Snapper Clean Sweep Twin Catcher is its twin bagging system. This dual-bag design enhances the efficiency of grass collection, allowing users to tackle even the most demanding mowing tasks with ease. Each bag is spacious enough to hold a substantial amount of clippings, minimizing the frequency of stops for emptying. The result is a cleaner lawn and more time spent mowing rather than managing clippings.

Incorporating advanced technology, the Twin Catcher offers an exclusive airflow design that optimizes grass suction. This innovative feature ensures that clippings are collected effectively, reducing lawn debris left behind. The clever design also contributes to preventing clogging, a common issue with traditional mowers, that can disrupt mowing operations and lead to frustration.

Another notable characteristic of the Snapper Clean Sweep Twin Catcher is its durability. The robust construction is built to withstand regular use, ensuring longevity and reliability. Users can trust that this mower will maintain peak performance season after season, even under challenging conditions.

Ease of use is a key consideration in the design of the Snapper Twin Catcher. The mower features an adjustable cutting height, allowing users to customize their mowing experience based on lawn type and desired finish. Additionally, the handle design is ergonomically engineered for comfort, reducing fatigue during longer mowing sessions. The lightweight frame makes maneuvering around obstacles a breeze, enhancing overall productivity.

Lastly, the Snapper Clean Sweep Twin Catcher is compatible with a variety of Snapper mowers, making it a versatile addition to any lawn care arsenal. Whether for small residential lawns or larger properties, this tool is equipped to handle diverse landscaping needs. Overall, the Snapper Clean Sweep Twin Catcher stands out as an exceptional mowing solution, combining high performance, innovative technology, and ease of use to achieve perfect lawn care results.