Snapper R204513E Service After First 5 Hours 3.2.1. Change Engine OIL, Check Mower Blade

Page 13

Section 3 - MAINTENANCE

3.1INTRODUCTION

To retain the quality of the mower, use genuine SNAPPER replacement parts only. Contact a local SNAPPER dealer for parts and service assistance. For the correct part or information for a particular mower, always mention model and serial number.

3.2SERVICE - AFTER FIRST 5 HOURS 3.2.1. CHANGE ENGINE OIL

WARNING

Before attempting any adjustments or repairs, STOP the engine, remove the spark plug wire from the spark plug and secure wire away from plug. Wear heavy leather gloves when handling or working around cutting blades. Blades are extremely sharp and can cause severe injury. Engine oil is extremely hot and can cause severe burns. Allow engine oil to cool before draining to prevent injury.

1.Disconnect spark plug wire and secure end away from plug. The items needed to perform oil change are: cloth rags, (1) 3/8” drive ratchet with a short extension and (1) shallow pan.

2.Tilt mower up on its rear wheels for access to the oil drain plug located underneath the mower deck. Do not tilt mower with spark plug or carburetor down. See Figure 3.1.

REMOVE OIL

PLUG

5.Lower the mower down and place the piece of wood under left rear wheel. Reach under mower and remove drain plug and allow oil to drain out completely in pan. Some oil may spill onto hands, immediately wipe hands clean with cloth rags.

6.Tilt mower back up and replace drain plug. Tighten securely but do not over tighten.

7.Fill engine with oil as specified in Engine Owner’s Manual. Thereafter, change oil after each

25hours of use.

IMPORTANT: DO NOT tip machine with carburetor or spark plug down, oil from crank case will saturate the air filter and cause the engine to hard start or not start at all. If contamination does occur the air filter will have to be replaced.

3.2.2 CHECK MOWER BLADE

1.Disconnect spark plug wire and secure end away from plug.

2.Tilt mower up on its rear wheels for access to the blade cap screw. Do not tilt mower with spark plug or carburetor down. See Figure 3.2.

3.Check torque of blade retaining cap screw. Recommended torque should be 30 to 40 ft. lbs. See Figure 3.2.

4.Check blade for sharpness, wear and damage. See Section on Blade Wear Limits.

MAKE SURE THAT

BLADE HUB IS

SEATED

BLADE BETWEEN

HUBFLANGES

FLANGE

BLADE

CONE WASHER (Widest Part Up)

CAPSCREW TORQUE 30-40 FT. LBS.

FIGURE 3.1

FIGURE 3.2

3.Place shallow pan underneath the approximate center of the oil drain plug.

4.Loosen with ratchet and short extension, but do not remove oil drain plug. Loosen plug until you can turn it with your fingers.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Steel Deck Walk Mowers Series Slope Operation Protection for ChildrenPreparation OperationMaintenance and Storage Table of Contents Steel Deck Walk Behind Mowers Operational Test LubricationDEALER’S Records & Final Check CONSUMER/OPERATOR Product Registration CardPage Nomenclature IntroductionStarting & Operation 2.2.1. Engine & Blade PRE-START Check ListOptional Power Cords Minimum Gauge for Cord Sets Stopping Handle Height AdjustmentRecycling Cover REMOVAL/INSTALLATION Cutting Height AdjustmentRecycling Operation Check Mower Blade Service After First 5 Hours 3.2.1. Change Engine OILAnnually END of Each Season Storage ProcedureBlade Sharpening Adjustments & RepairProblem Probable Cause Corrective Action TroubleshootingMAINTENANCE/REPLACEMENT Parts Service Performed EachUSE HRS Season Disclaimer of Warranty Year Limited WarrantyPrimary Maintenance Cost YOU Money Distorted valve guides Sticking Valves Cap vent open Service Notes Service Notes Steel Deck Walk Behind Mowers Series

R204513E specifications

The Snapper R204513E is a versatile and efficient lawn mower designed to provide homeowners with an exceptional mowing experience. Equipped with advanced features and innovative technology, this mower is perfect for maintaining a well-manicured lawn with minimal effort.

At the heart of the Snapper R204513E is its powerful engine. The mower is powered by a reliable 4-cycle engine, which offers excellent performance and efficiency. This engine provides ample torque to handle various grass types and terrains, ensuring a clean and consistent cut with every pass. Additionally, the mower's self-propelled drive system allows for easy maneuverability, reducing the strain on the user while navigating challenging landscapes.

One of the standout features of the Snapper R204513E is its 21-inch cutting deck. This size strikes the perfect balance between compactness and coverage, making it suitable for both smaller yards and larger lawns. The cutting deck is adjustable, allowing users to choose from multiple cutting heights, ranging from 1 to 4 inches. This customization ensures that homeowners can achieve their desired lawn appearance, whether they prefer a closely trimmed look or a taller, more natural finish.

The mower also boasts a 3-in-1 cutting system. This innovative design allows users to choose between bagging, mulching, or side discharge options. The mulching feature is particularly beneficial for those looking to recycle grass clippings, as it finely chops grass and distributes it back into the lawn as natural fertilizer. The bagging option efficiently collects grass clippings, resulting in a neat and tidy yard.

In terms of user comfort and convenience, the Snapper R204513E includes adjustable ergonomic handles that can be set to various heights to suit the operator’s preference. This ensures a comfortable mowing position and less fatigue during use. Additionally, the mower is equipped with easy-to-access controls, making it simple to operate even for novice users.

Durability is a key characteristic of the Snapper R204513E. It is built with high-quality materials, including a robust steel deck that can withstand the rigors of regular mowing. The design also incorporates reliable components that require minimal maintenance, allowing users to focus more on lawn care and less on upkeep.

Overall, the Snapper R204513E combines power, versatility, and user-friendly features, making it a top choice for homeowners looking to enhance their lawn care routine. With its advanced technologies and thoughtful design, this mower is designed to deliver outstanding performance and reliability for years to come.
Top Page Image Contents