Snapper R204513E important safety instructions Cap vent open

Page 22

PRIMARY MAINTENANCE

On 4-cycle engines with an oil level plug, don’t be fooled onto thinking the engine has sufficient lubricating oil if you can see “some” oil in the opening – the level should always be brought up to the point of overflowing at the top of the fill hole.

Change oil at regular intervals using a high quality oil such as Snapper’s small engine formulated 4-cycle engine oil. Refer to the engine owner’s manual for oil details.

1.

Engine Oil

To full level (4-cycle).

 

 

Properly mixed with gas

 

 

(2- cycle).

2.

Air Cleaner

Clean and properly serviced.

 

 

Full fresh clean gasoline.

3.

Fuel Tank

Fuel valve open.

 

 

Cap vent open.

 

 

Inline filter clean.

4.

Choke

Operating properly.

5.

Primer (on

Used properly.

 

some engines)

 

6.

Safety Interlock

In proper position.

 

Switches

All wires properly connected.

7.

Switch & Blade

Switch On.

 

Control

Blade control properly

 

 

positioned on walk mower.

8.

Spark Plug

Wire connected.

 

 

Good connection.

9.

Throttle Control

Start Position.

10.

Blade

Properly installed and

 

 

torqued.

 

 

Sharpened.

11.

Muffler

Good condition.

 

 

Not clogged.

 

 

Grass & leaves cleaned away.

 

 

 

On 2-cycle engines, lubrication must be provided by an exact mixture of gasoline and 2-cycle air-cooled engine oil. A 2-cycle engine that is mistakenly run on straight gasoline will be ruined in less than 5 minutes! If you keep straight gasoline in addition to pre-mixed 2-cycle engine fuel, be sure the containers are clearly marked to avoid mix-up.

Snapper 2-cycle engines require a 32 to 1 mixture of gasoline and BIA certified TC-W oil such as Snapper’s 2-cycle engine oil. Many of the 2-cycle engine oils on the market today make fantastic claims, but for the best performance and long engine life, always use Snapper 2-cycle oil. Pre-mix the fuel and always shake the container before filling the tank.

Read and follow all safety instructions in safety booklets and manuals.

Keep in mind that dirt is your engine’s enemy #1 both internally and externally! Internally, dirt will quickly ruin an engine and externally it will cause overheating and resulting internal damages. Damage caused by improper lubrication, poor air cleaner service or overheating due to dirt cannot be covered under warranty.

It only takes a few moments to service the engine (and equipment) on a routine basis but the rewards will be a quick starting, responsive engine that will provide long satisfactory service with minimum maintenance cost. The pre-start checklist in the next column and instructions in your Snapper Operator’s Manual are designated to help you keep your Snapper in top operating condition with minimum effort!

22

Image 22
Contents Steel Deck Walk Mowers Series Preparation Protection for ChildrenSlope Operation OperationMaintenance and Storage Table of Contents Steel Deck Walk Behind Mowers DEALER’S Records & Final Check LubricationOperational Test CONSUMER/OPERATOR Product Registration CardPage Introduction NomenclaturePRE-START Check List Starting & Operation 2.2.1. Engine & BladeOptional Power Cords Minimum Gauge for Cord Sets Handle Height Adjustment StoppingRecycling Cover REMOVAL/INSTALLATION Cutting Height AdjustmentRecycling Operation Service After First 5 Hours 3.2.1. Change Engine OIL Check Mower BladeStorage Procedure Annually END of Each SeasonAdjustments & Repair Blade SharpeningTroubleshooting Problem Probable Cause Corrective ActionMAINTENANCE/REPLACEMENT Parts Service Performed EachUSE HRS Season Year Limited Warranty Disclaimer of WarrantyPrimary Maintenance Cost YOU Money Distorted valve guides Sticking Valves Cap vent open Service Notes Service Notes Steel Deck Walk Behind Mowers Series

R204513E specifications

The Snapper R204513E is a versatile and efficient lawn mower designed to provide homeowners with an exceptional mowing experience. Equipped with advanced features and innovative technology, this mower is perfect for maintaining a well-manicured lawn with minimal effort.

At the heart of the Snapper R204513E is its powerful engine. The mower is powered by a reliable 4-cycle engine, which offers excellent performance and efficiency. This engine provides ample torque to handle various grass types and terrains, ensuring a clean and consistent cut with every pass. Additionally, the mower's self-propelled drive system allows for easy maneuverability, reducing the strain on the user while navigating challenging landscapes.

One of the standout features of the Snapper R204513E is its 21-inch cutting deck. This size strikes the perfect balance between compactness and coverage, making it suitable for both smaller yards and larger lawns. The cutting deck is adjustable, allowing users to choose from multiple cutting heights, ranging from 1 to 4 inches. This customization ensures that homeowners can achieve their desired lawn appearance, whether they prefer a closely trimmed look or a taller, more natural finish.

The mower also boasts a 3-in-1 cutting system. This innovative design allows users to choose between bagging, mulching, or side discharge options. The mulching feature is particularly beneficial for those looking to recycle grass clippings, as it finely chops grass and distributes it back into the lawn as natural fertilizer. The bagging option efficiently collects grass clippings, resulting in a neat and tidy yard.

In terms of user comfort and convenience, the Snapper R204513E includes adjustable ergonomic handles that can be set to various heights to suit the operator’s preference. This ensures a comfortable mowing position and less fatigue during use. Additionally, the mower is equipped with easy-to-access controls, making it simple to operate even for novice users.

Durability is a key characteristic of the Snapper R204513E. It is built with high-quality materials, including a robust steel deck that can withstand the rigors of regular mowing. The design also incorporates reliable components that require minimal maintenance, allowing users to focus more on lawn care and less on upkeep.

Overall, the Snapper R204513E combines power, versatility, and user-friendly features, making it a top choice for homeowners looking to enhance their lawn care routine. With its advanced technologies and thoughtful design, this mower is designed to deliver outstanding performance and reliability for years to come.