Snapper R204513E important safety instructions Annually END of Each Season, Storage Procedure

Page 14

Section 3 - MAINTENANCE

3.3 ANNUALLY (END OF EACH SEASON)

Perform all maintenance as described in the maintenance schedule.

3.3.1. Engine

Service engine according to engine owner’s manual.

3.3.2. Air Filter

Refer to engine owner’s manual for service instructions.

3.3.3. Engine Oil

Refer to engine owner’s manual for service instructions.

3.4 STORAGE PROCEDURE

Refer to the Engine Owner’s Manual for directions regarding engine storage preparations. Prepare the mower for “end of season” storage as follows:

1.Drain fuel from fuel tank and let engine run until all fuel is out of the carburetor.

2.Disconnect and remove the spark plug wire away from spark plug before any other preparations are made!

3.Tape all openings closed to prevent spraying water into exhaust or air intakes during washing.

4.Tilt mower up on its rear wheels and thoroughly clean the underside of the deck. Do not tilt mower with spark plug or carburetor down. Scrape away any accumulation of grass with a putty knife and or wire brush.

5.Lubricate all exposed metal with a light coating of oil to prevent corrosion.

6.Loosen handle knobs. Carefully fold the handles forward, “flexing” the control cables to prevent cable damage.

7.Store the mower in a shed or other dry area, protected from weather.

14

Image 14
Contents Steel Deck Walk Mowers Series Preparation Protection for ChildrenSlope Operation OperationMaintenance and Storage Table of Contents Steel Deck Walk Behind Mowers DEALER’S Records & Final Check LubricationOperational Test CONSUMER/OPERATOR Product Registration CardPage Introduction NomenclaturePRE-START Check List Starting & Operation 2.2.1. Engine & BladeOptional Power Cords Minimum Gauge for Cord Sets Handle Height Adjustment StoppingRecycling Operation Cutting Height AdjustmentRecycling Cover REMOVAL/INSTALLATION Service After First 5 Hours 3.2.1. Change Engine OIL Check Mower BladeStorage Procedure Annually END of Each SeasonAdjustments & Repair Blade SharpeningTroubleshooting Problem Probable Cause Corrective ActionUSE HRS Season Service Performed EachMAINTENANCE/REPLACEMENT Parts Year Limited Warranty Disclaimer of WarrantyPrimary Maintenance Cost YOU Money Distorted valve guides Sticking Valves Cap vent open Service Notes Service Notes Steel Deck Walk Behind Mowers Series

R204513E specifications

The Snapper R204513E is a versatile and efficient lawn mower designed to provide homeowners with an exceptional mowing experience. Equipped with advanced features and innovative technology, this mower is perfect for maintaining a well-manicured lawn with minimal effort.

At the heart of the Snapper R204513E is its powerful engine. The mower is powered by a reliable 4-cycle engine, which offers excellent performance and efficiency. This engine provides ample torque to handle various grass types and terrains, ensuring a clean and consistent cut with every pass. Additionally, the mower's self-propelled drive system allows for easy maneuverability, reducing the strain on the user while navigating challenging landscapes.

One of the standout features of the Snapper R204513E is its 21-inch cutting deck. This size strikes the perfect balance between compactness and coverage, making it suitable for both smaller yards and larger lawns. The cutting deck is adjustable, allowing users to choose from multiple cutting heights, ranging from 1 to 4 inches. This customization ensures that homeowners can achieve their desired lawn appearance, whether they prefer a closely trimmed look or a taller, more natural finish.

The mower also boasts a 3-in-1 cutting system. This innovative design allows users to choose between bagging, mulching, or side discharge options. The mulching feature is particularly beneficial for those looking to recycle grass clippings, as it finely chops grass and distributes it back into the lawn as natural fertilizer. The bagging option efficiently collects grass clippings, resulting in a neat and tidy yard.

In terms of user comfort and convenience, the Snapper R204513E includes adjustable ergonomic handles that can be set to various heights to suit the operator’s preference. This ensures a comfortable mowing position and less fatigue during use. Additionally, the mower is equipped with easy-to-access controls, making it simple to operate even for novice users.

Durability is a key characteristic of the Snapper R204513E. It is built with high-quality materials, including a robust steel deck that can withstand the rigors of regular mowing. The design also incorporates reliable components that require minimal maintenance, allowing users to focus more on lawn care and less on upkeep.

Overall, the Snapper R204513E combines power, versatility, and user-friendly features, making it a top choice for homeowners looking to enhance their lawn care routine. With its advanced technologies and thoughtful design, this mower is designed to deliver outstanding performance and reliability for years to come.