Snapper EM250821BE, EM281021BE Service Annually, Engine, Fuel Filter, Every TWO Years

Page 19

Section 3 - MAINTENANCE

WARNING

DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are HOT. Avoid serious burns, allow all parts to cool before working on machine. Fuel Filler Cap and Vent must be closed securely to prevent fuel spillage.

3.3SERVICE - EVERY 25 OPERATING HOURS 3.3.9. DIFFERENTIAL/CHAIN CASE - LUBRICATION 3. Check fill/level plug for damage. If signs of wear or cracks are visible, replace plug with new plug. See Figure 3.9.

4.To check lubricant in chain case, remove fill/level plug and look for lubricant on the internal components of the chain case. If no lubricant is visible, add "SNAPPER Transmission” grease as needed. See Figure 3.9.

AXLE

BOOTS

CHAIN

CASE

FILL/LEVEL PLUG

P.N. 1-1024

FIGURE 3.9

3.3.10.Check “MAINTENANCE SCHEDULE” Section of Engine Owner’s Manual for additional engine service.

3.4SERVICE - ANNUALLY

3.4.1.Perform all maintenance as specified in “MAINTENANCE SCHEDULE” Section of this manual.

3.4.2.ENGINE

Perform all maintenance as specified in Engine Owner’s Manual.

3.4.3. FUEL FILTER

Service fuel filter as instructed below, on COLD ENGINE ONLY!

IMPORTANT: To stop flow of fuel, tank may be removed from bracket and set on the floor so the fuel level will be below the filter. Refer to Section “REMOVING FUEL TANK”.

1.Remove hose clamps from fuel filter.

2.Remove fuel lines from filter. Discard filter.

3.Install new fuel filter. See Figure 3.10.

4.Reinstall fuel tank into bracket.

HOSE

CLAMPS

FUEL

FILTER

P.N. 1-4359

FIGURE 3.10

3.5EVERY TWO YEARS

In addition to regular maintenance, the following components of the Rear Engine Rider should be carefully inspected every two years for wear or damage. Replace worn or damaged parts with genuine SNAPPER replacement parts available from an authorized SNAPPER dealer.

3.5.1.All bushings and pivot areas.

3.5.2.Check both front wheel king pins.

3.5.3.Transmission shift lever and detent.

3.5.4.Clutch disc.

3.5.5.Clutch Yoke (See Figure 4.9).

3.5.6.Mower deck linkage and pivot areas.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Manual No -3545 I.R /29/00 European Rear Engine Riding Mower SeriesImportant Safety Instructions Operation Table of Contents Nomenclature IntroductionFamiliarization Decals / Symbols Lowest Traction Height CUT Clutch PRE-START Check List OPERATOR’S Seat Adjustment 2.2.1. Front to Rear AdjustmentOn Next Starting & Operation Engine Electric StartEngine Electric Start Starting & OperationEngine Manual Start Wheel Drive Starting & Operation 2.3.3. Mower BladeMower Blade Stopping ENGINE, Wheel DRIVE, Blade 2.4.1. EngineStopping ENGINE, Wheel DRIVE, Blade 2.4.4. Park Brake Cutting Height AdjustmentDo not park machine on slopes Reverse Lockout Mechanism Override Reverse Lockout MechanismService Engine AIR Cleaner Check Mower Blade Service After First 5 Hours Change Engine OILService Brake / Park Brake Service After First 5 Hours 3.2.4. Check Blade Drive BeltBlade Brake Interlock System Service Every 25 Operating HoursBattery Fluid Level Clean Mower DeckFront Wheel Bearing Lubrication Service Every 25 Operating Hours from previousRear Axle Bearing Lubrication Every TWO Years Service AnnuallyEngine Fuel FilterRemoving Fuel Tank Storage OUT of SeasonMower Drive Belt Adjustment for 25, 28 & 30 M Models Engine Adjustments & RepairMower Deck Adjustment Side-To-Side Levelness Blade Brake AdjustmentFront to Rear Levelness 25 & 28 Decks Mower Deck AdjustmentFront to Rear Levelness 30 Decks Chain Case Clutch Yoke Cable Housing Spring Blade Sharpening Mower Blade Replacement 4.4.1. Blade Wear LimitsBelt Replacement Blade Drive Belt ReplacementBelt Removal Battery Installation Battery Battery RemovalBattery Testing Battery ServiceBattery Storage NEW Battery Preparation 1. Remove battery from cartonSnapper Rear Engine Rider Accessories Stop Problem Probable Cause Corrective ActionImproperly Loss Of TractionBlades Not Cutting Cutting GrassTo be Performed Pages Subject Service ReferenceMAINTENANCE/REPLACEMENT Parts Maintenance Parts Disclaimer of Warranty Year Limited WarrantyService Notes Service Notes European Rear Engine Riding Mower Series

EM250821BE, EM281021BE specifications

The Snapper EM250821BE and EM281021BE models are two versatile battery-powered mowers designed to meet the diverse needs of homeowners and landscape professionals alike. These electric mowers are characterized by their user-friendly design, robust performance, and advanced technology, making them ideal for efficient lawn care.

One of the standout features of the Snapper EM250821BE is its 21-inch cutting deck, which ensures a wide mowing path and allows users to cover more ground in less time. This model is equipped with a powerful 82V battery system that delivers consistent voltage and runtime for large, demanding yards. With a simple push of a button, users can engage the motor, eliminating the hassle of pull-starts commonly associated with gas mowers.

The EM281021BE, on the other hand, boasts a slightly larger 28-inch cutting deck, which is designed for even greater efficiency. With its dual-blade technology, this mower not only provides a clean, precise cut but also enhances grass mulching capabilities, returning nutrients back to the lawn. Both models feature adjustable cutting heights, allowing users to customize the mower settings to suit different grass types and desired lawn appearances.

Another key technology incorporated in both mowers is the Smart Drive self-propulsion system. This system responds to the user’s walking speed, enabling effortless maneuverability across various terrains. With variable speed settings, operators can maintain control over their mowing pace, whether navigating tight corners or cruising down wide-open fields.

Ergonomically designed handles improve user comfort, and the foldable design enhances convenience for storage and transportation. A quick-release handle makes it easy to adjust the mower's height, accommodating users of all sizes and ensuring comfortable operation.

Both Snapper EM250821BE and EM281021BE are equipped with high-efficiency brushless motors that reduce noise and vibrations, resulting in a quieter mowing experience. Furthermore, their maintenance-free design means that users won’t have to deal with oil changes or spark plug replacements, making them environmentally friendly alternatives to traditional gas mowers.

In conclusion, the Snapper EM250821BE and EM281021BE mowers combine modern technology, ease of use, and powerful performance to deliver exceptional results. Whether for residential or professional use, these models are designed to meet the growing demand for sustainable lawn care solutions while maintaining the high standards that Snapper is known for.
Top Page Image Contents