Snapper EM250821BE, EM281021BE Mower Blade Replacement 4.4.1. Blade Wear Limits, Blade Sharpening

Page 25

Section 4 - ADJUSTMENTS & REPAIR

WARNING

DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are HOT. Avoid serious burns, allow all parts to cool before working on machine. Fuel Filler Cap and Vent must be closed securely to prevent fuel spillage. DO NOT use a cutting blade that shows signs of excessive wear or damage. On Rear Engine Riders equipped with a grass catcher attachment, the air lifts should be replaced when the blade is replaced.

4.4 MOWER BLADE REPLACEMENT 4.4.1. BLADE WEAR LIMITS

1.Inspect blade frequently for signs of excessive wear or damage. See Figure 4.11.

NEW BLADE

WEAR LIMIT (NOTCH STARTS)

DANGEROUS CONDITION!

DO NOT USE ON MOWER!

REPLACE WITH NEW BLADE.

FIGURE 4.11

WARNING

Blades are extremely sharp and can cause severe injuries. Wear heavy gloves when working on or handling blades. DO NOT use blades that show signs of wear or damage.

4.4.2. BLADE SHARPENING

1.Follow WARNING statement found on this page.

2.Check fuel level in tank. If over 3/4 full, remove tank. Refer to Section “REMOVING FUEL TANK”. If 3/4 or less, proceed to next step.

3.Carefully stand Rear Engine Rider on rear bumper.

4.Remove blade. See Figure 4.12.

5.Inspect condition of blade. See Figure 4.11.

6.If blade is in good condition, sharpen at 22 to 28 degrees. DO NOT sharpen beyond existing cutting edge. See Figure 4.13.

7.Check blade balance after sharpening. If necessary, correct blade balance by grinding the heavy end of blade.

8.Reinstall blade. See Figure 4.12. Torque blade mounting bolts to recommended range of 30 to 40 ft. lbs.

NUTLOCKWASHER

 

BLADE

 

MOUNTING

BLADE

BOLTS

 

FIGURE 4.12

DO NOT SHARPEN BEYOND

ORIGINAL

22 TO 28º

BLADE TIP

ORIGINAL CUTTING EDGE

FIGURE 4.13

25

Image 25
Contents Manual No -3545 I.R /29/00 European Rear Engine Riding Mower SeriesImportant Safety Instructions Operation Table of Contents Nomenclature IntroductionFamiliarization Decals / Symbols Lowest Traction Height CUT Clutch PRE-START Check List OPERATOR’S Seat Adjustment 2.2.1. Front to Rear AdjustmentOn Next Starting & Operation Engine Electric StartEngine Electric Start Starting & OperationEngine Manual Start Wheel Drive Starting & Operation 2.3.3. Mower BladeMower Blade Stopping ENGINE, Wheel DRIVE, Blade 2.4.1. EngineStopping ENGINE, Wheel DRIVE, Blade 2.4.4. Park Brake Cutting Height AdjustmentDo not park machine on slopes Reverse Lockout Mechanism Override Reverse Lockout MechanismService Engine AIR Cleaner Check Mower Blade Service After First 5 Hours Change Engine OILService Brake / Park Brake Service After First 5 Hours 3.2.4. Check Blade Drive BeltBlade Brake Battery Fluid Level Service Every 25 Operating HoursClean Mower Deck Interlock SystemFront Wheel Bearing Lubrication Service Every 25 Operating Hours from previousRear Axle Bearing Lubrication Engine Service AnnuallyFuel Filter Every TWO YearsRemoving Fuel Tank Storage OUT of SeasonMower Drive Belt Adjustment for 25, 28 & 30 M Models Engine Adjustments & RepairMower Deck Adjustment Side-To-Side Levelness Blade Brake AdjustmentFront to Rear Levelness 25 & 28 Decks Mower Deck AdjustmentFront to Rear Levelness 30 Decks Chain Case Clutch Yoke Cable Housing Spring Blade Sharpening Mower Blade Replacement 4.4.1. Blade Wear LimitsBelt Replacement Blade Drive Belt ReplacementBelt Removal Battery Installation Battery Battery RemovalBattery Storage Battery ServiceNEW Battery Preparation 1. Remove battery from carton Battery TestingSnapper Rear Engine Rider Accessories Stop Problem Probable Cause Corrective ActionBlades Not Cutting Loss Of TractionCutting Grass ImproperlyTo be Performed Pages Subject Service ReferenceMAINTENANCE/REPLACEMENT Parts Maintenance Parts Disclaimer of Warranty Year Limited WarrantyService Notes Service Notes European Rear Engine Riding Mower Series

EM250821BE, EM281021BE specifications

The Snapper EM250821BE and EM281021BE models are two versatile battery-powered mowers designed to meet the diverse needs of homeowners and landscape professionals alike. These electric mowers are characterized by their user-friendly design, robust performance, and advanced technology, making them ideal for efficient lawn care.

One of the standout features of the Snapper EM250821BE is its 21-inch cutting deck, which ensures a wide mowing path and allows users to cover more ground in less time. This model is equipped with a powerful 82V battery system that delivers consistent voltage and runtime for large, demanding yards. With a simple push of a button, users can engage the motor, eliminating the hassle of pull-starts commonly associated with gas mowers.

The EM281021BE, on the other hand, boasts a slightly larger 28-inch cutting deck, which is designed for even greater efficiency. With its dual-blade technology, this mower not only provides a clean, precise cut but also enhances grass mulching capabilities, returning nutrients back to the lawn. Both models feature adjustable cutting heights, allowing users to customize the mower settings to suit different grass types and desired lawn appearances.

Another key technology incorporated in both mowers is the Smart Drive self-propulsion system. This system responds to the user’s walking speed, enabling effortless maneuverability across various terrains. With variable speed settings, operators can maintain control over their mowing pace, whether navigating tight corners or cruising down wide-open fields.

Ergonomically designed handles improve user comfort, and the foldable design enhances convenience for storage and transportation. A quick-release handle makes it easy to adjust the mower's height, accommodating users of all sizes and ensuring comfortable operation.

Both Snapper EM250821BE and EM281021BE are equipped with high-efficiency brushless motors that reduce noise and vibrations, resulting in a quieter mowing experience. Furthermore, their maintenance-free design means that users won’t have to deal with oil changes or spark plug replacements, making them environmentally friendly alternatives to traditional gas mowers.

In conclusion, the Snapper EM250821BE and EM281021BE mowers combine modern technology, ease of use, and powerful performance to deliver exceptional results. Whether for residential or professional use, these models are designed to meet the growing demand for sustainable lawn care solutions while maintaining the high standards that Snapper is known for.