Snapper EM250821BE, EM281021BE important safety instructions Engine Adjustments & Repair

Page 21

Section 4 - ADJUSTMENTS & REPAIR

WARNING

DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are HOT. Avoid serious burns, allow all parts to cool before working on machine. Fuel Filler Cap and Vent must be closed securely to prevent fuel spillage.

4.1ENGINE ADJUSTMENTS & REPAIR

Refer to the engine owner’s manual for those adjustments and/or repairs that can be made by the owner.

4.2MOWER DECK & COMPONENT ADJUSTMENTS The following mower deck and component adjustments and repairs can be made by the owner. However, if there is difficulty in achieving these adjustments and repairs, it is recommended that these repairs be made by an authorized SNAPPER dealer.

4.2.1.MOWER DRIVE BELT ADJUSTMENT (FOR 25”, 28" & 30" "M" MODELS)

1.Remove mower drive belt cover. Refer to Section “CHECK MOWER DRIVE BELT”.

2.Move blade lever up and over to the “ON” position.

3.Place deck cutting height in the 3rd position. Measure the belt spacing at idler pulley. The distance should measure 1-1/4” but no less than 1”. See Figure 4.1.

1-1/4”

FLAT

WASHERS

HAIRPIN

FRAME

SPACERS

FIGURE 4.2

7.Install required number of snap-in frame spacers behind channel pivot until the 1-1/4” distance between belt is maintained. See Figure 4.3.

SNAP-IN FRAME

SPACER

P.N. 2-8395

 

IDLER

ENGINE DRIVE

SPINDLE

PULLEY

PULLEY

ASSEMBLY

PULLEY

 

 

FIGURE 4.1

4.If the distance is less than 1”, adjust belt tension.

5.Remove hairpin and flat washers from pivot stud. See Figure 4.2.

6.Pull front frame forward until distance between belt, with blade lever “ON”, measures 1-1/4”.

FIGURE 4.3

8.Reinstall the required amount of flat washers removed in step “5.” and install hairpin. See Figure

4.2.Retain any remaining spacers for readjustment when a new belt is installed.

IMPORTANT: The SNAPPER "M" Series Rear Engine Rider Models are shipped with additional spacers specifically designed for the Rear Engine Rider. Should additional spacers be required, contact an authorized SNAPPER dealer.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Manual No -3545 I.R /29/00 European Rear Engine Riding Mower SeriesImportant Safety Instructions Operation Table of Contents Nomenclature IntroductionFamiliarization Decals / Symbols Lowest Traction Height CUT Clutch PRE-START Check List OPERATOR’S Seat Adjustment 2.2.1. Front to Rear AdjustmentOn Next Starting & Operation Engine Electric StartStarting & Operation Engine Electric StartEngine Manual Start Wheel Drive Starting & Operation 2.3.3. Mower BladeMower Blade Stopping ENGINE, Wheel DRIVE, Blade 2.4.1. EngineCutting Height Adjustment Stopping ENGINE, Wheel DRIVE, Blade 2.4.4. Park BrakeDo not park machine on slopes Reverse Lockout Mechanism Override Reverse Lockout MechanismService Engine AIR Cleaner Check Mower Blade Service After First 5 Hours Change Engine OILService After First 5 Hours 3.2.4. Check Blade Drive Belt Service Brake / Park BrakeBlade Brake Battery Fluid Level Service Every 25 Operating HoursClean Mower Deck Interlock SystemService Every 25 Operating Hours from previous Front Wheel Bearing LubricationRear Axle Bearing Lubrication Engine Service AnnuallyFuel Filter Every TWO YearsRemoving Fuel Tank Storage OUT of SeasonMower Drive Belt Adjustment for 25, 28 & 30 M Models Engine Adjustments & RepairMower Deck Adjustment Side-To-Side Levelness Blade Brake AdjustmentMower Deck Adjustment Front to Rear Levelness 25 & 28 DecksFront to Rear Levelness 30 Decks Chain Case Clutch Yoke Cable Housing Spring Blade Sharpening Mower Blade Replacement 4.4.1. Blade Wear LimitsBlade Drive Belt Replacement Belt ReplacementBelt Removal Battery Installation Battery Battery RemovalBattery Storage Battery ServiceNEW Battery Preparation 1. Remove battery from carton Battery TestingSnapper Rear Engine Rider Accessories Stop Problem Probable Cause Corrective ActionBlades Not Cutting Loss Of TractionCutting Grass ImproperlyTo be Performed Pages Subject Service ReferenceMAINTENANCE/REPLACEMENT Parts Maintenance Parts Disclaimer of Warranty Year Limited WarrantyService Notes Service Notes European Rear Engine Riding Mower Series

EM250821BE, EM281021BE specifications

The Snapper EM250821BE and EM281021BE models are two versatile battery-powered mowers designed to meet the diverse needs of homeowners and landscape professionals alike. These electric mowers are characterized by their user-friendly design, robust performance, and advanced technology, making them ideal for efficient lawn care.

One of the standout features of the Snapper EM250821BE is its 21-inch cutting deck, which ensures a wide mowing path and allows users to cover more ground in less time. This model is equipped with a powerful 82V battery system that delivers consistent voltage and runtime for large, demanding yards. With a simple push of a button, users can engage the motor, eliminating the hassle of pull-starts commonly associated with gas mowers.

The EM281021BE, on the other hand, boasts a slightly larger 28-inch cutting deck, which is designed for even greater efficiency. With its dual-blade technology, this mower not only provides a clean, precise cut but also enhances grass mulching capabilities, returning nutrients back to the lawn. Both models feature adjustable cutting heights, allowing users to customize the mower settings to suit different grass types and desired lawn appearances.

Another key technology incorporated in both mowers is the Smart Drive self-propulsion system. This system responds to the user’s walking speed, enabling effortless maneuverability across various terrains. With variable speed settings, operators can maintain control over their mowing pace, whether navigating tight corners or cruising down wide-open fields.

Ergonomically designed handles improve user comfort, and the foldable design enhances convenience for storage and transportation. A quick-release handle makes it easy to adjust the mower's height, accommodating users of all sizes and ensuring comfortable operation.

Both Snapper EM250821BE and EM281021BE are equipped with high-efficiency brushless motors that reduce noise and vibrations, resulting in a quieter mowing experience. Furthermore, their maintenance-free design means that users won’t have to deal with oil changes or spark plug replacements, making them environmentally friendly alternatives to traditional gas mowers.

In conclusion, the Snapper EM250821BE and EM281021BE mowers combine modern technology, ease of use, and powerful performance to deliver exceptional results. Whether for residential or professional use, these models are designed to meet the growing demand for sustainable lawn care solutions while maintaining the high standards that Snapper is known for.
Top Page Image Contents