Snapper ELT180H33IBV important safety instructions Annually END of Each Season, Fuel Filter

Page 18

Section 3 - MAINTENANCE

3.3.4.TRACTOR LUBRICATION (Continued From Previous Page)

7. Steering Tie Rod

Lubricate both ends of steering tie rod with a small amount of 30 wt. motor oil from an oil can. See Figure 3.10.

LUBRICATE

BOTH ENDS

OF TIE ROD

FIGURE 3.10

8. Blade Engagement Mechanism

Using 30 wt. motor oil, lubricate the blade engagement mechanism pivot points, which are located on the R.H. underside of tractor. See Figure 3.11.

LUBRICATE

COMPONENTS ON

UNDERSIDE OF

TRACTOR

BLADE

ENGAGEMENT

LEVER

FIGURE 3.11

9. Park Brake Lever

Using 30 wt. motor oil, lubricate the park brake lever mechanism pivot points, which are located on the left hand underside of tractor. See Figure 3.12. mechanism with a thin coat of 30 wt. motor oil.

PARK BRAKE

LEVER

LUBRICATE COMPONENTS ON

UNDERSIDE OF TRACTOR

FIGURE 3.12

10.Deck Lift Mechanism

Lubricate all wear and pivot points of the deck lift

3.4ANNUALLY (END OF EACH SEASON)

Perform all maintenance as described in Section, “SERVICE - EVERY 25 OPERATING HOURS”. Also see service schedule.

3.4.1.ENGINE

1.Service engine according to engine owner's manual.

3.4.2.FUEL FILTER

1.Service fuel filter as instructed below, on COLD ENGINE ONLY!

NOTE: It may be necessary to drain the fuel tank before removing fuel filter to prevent spillage of gasoline.

2.Locate fuel filter. Remove hose clamps and fuel hoses from both sides of fuel filter. See Figure 3.13.

FUEL TANK

FUEL FILTER

REMOVE

HOSE CLAMPS

FIGURE 3.13

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Model Number Explanation 180Important Safety Instructions Important Safety Instructions Towing Table of Contents Familiarization ControlsFamiliarization Decals / Symbols Lights on Engine OFF PRE-START Checklist OPERATOR’S Seat Adjustment Front to Rear AdjustmentStarting & Operation Starting Engine OFFStopping ENGINE, BLADE, Wheel Drive 2.4.1 Stopping Engine Starting & Operation 2.3.2. Starting Wheel DriveStarting Mower Blade Stopping Wheel DriveStopping Stopping Mower Blade Setting Park BrakeCutting Height Adjustment Releasing Park BrakeRolling Tractor with Engine OFF Rolling Hydro Models Reverse Lockout Mechanism Reverse Lockout Mechanism OverrideChange Engine OIL Service After First 5 HoursIntroduction Check Blade BrakeService Every 25 Operating Hours Check Engine Check Deck Drive BeltMower Components Tractor Lubrication Annually END of Each Season Fuel FilterEngine Must not Start if Annually END of Each Season 3.4.2. Fuel FilterSpark Plug Hydrostatic Transmission OIL Engine should Start ifEngine Adjustments & Repair Blade Brake AdjustmentOn next Blade Belt Adjustment 33 Deck from previous Adjusting Mower Blade 33 Decks OnlySide View of Deck Deck Level Adjustment Side to Side Deck Level Adjustment Side to Side Deck Level Adjustment Front to Rear Sector PlatesDeck Level Adjustment Front to Rear Front Lift ROD Tractor Drive Components 4.3.1. Brake Adjustment Steering AdjustmentShifter Adjustment Mower Blade Service Standard Blade Wear Limits Standard Blade Sharpening Mower Blade ReplacementNinja Blade Wear Limits Ninja Blade SharpeningMower Deck Removal Mower Blade ReplacementTraction Drive Belt Replacement Traction drive belt removalTraction drive belt replacement Traction drive belt removal from previousView from Underneath Tractor Traction drive belt replacement from previous Deck Belt Removal & ReplacementDeck Drive Belt Battery Service Battery Battery RemovalBattery Installation Battery StorageBattery Testing NEW Battery PreparationAvailable Accessories Available ELT150H33IBV AccessoriesElectrical System Schematics Briggs & Stratton with Lights Problem Probable Cause Corrective ActionTractor Will Not 1. Speed control handle in the neutral N PositionEngine speed too slow Maintenance Parts Year Limited Warranty Disclaimer of WarrantyService Notes European Lawn Tractor Hydrostatic Drive Series

ELT180H33IBV specifications

The Snapper ELT180H33IBV is an exceptional lawn mower designed for efficiency and ease of use, making it an ideal choice for homeowners looking to maintain their lawns with minimal effort. This mower is part of Snapper’s reputation for producing reliable and high-performance outdoor power equipment, delivering a robust solution for lawn care enthusiasts.

One of the standout features of the ELT180H33IBV is its powerful engine. It is equipped with a 180cc Briggs & Stratton engine, providing ample horsepower to tackle various mowing tasks with ease. This engine is designed for efficiency, ensuring that users can mow larger areas without frequent refueling, which significantly enhances productivity during mowing sessions.

The Snapper ELT180H33IBV features a 33-inch cutting deck, making it compact yet efficient. The size allows for maneuverability in tight spaces, such as flower beds and garden edges, while still covering enough ground to make mowing quicker. The cutting deck height is easily adjustable, offering multiple height settings to achieve the desired grass length, which adds versatility to accommodate different types of lawns.

In terms of technology, the ELT180H33IBV is equipped with a user-friendly starting system. The mower features an easy pull-start mechanism, and the engine is designed to start with minimal effort, ensuring that users can quickly get to work without frustration.

Another important characteristic of this mower is its durability. Snapper has built this model with high-quality materials to withstand the rigors of outdoor use. The rugged construction ensures long-lasting performance, significantly reducing the need for frequent repairs or replacements.

For added convenience, the Snapper ELT180H33IBV incorporates a rear bagging system, which collects clippings for easy disposal. By using the bagging option, homeowners can keep their lawns looking neat and tidy without the hassle of raking.

Moreover, the mower comes with comfortable handles that provide a secure grip, enhancing overall control during operation. This ergonomic design reduces fatigue, making it easier to maneuver the mower over extended periods.

In summary, the Snapper ELT180H33IBV is a well-rounded mower that combines power, versatility, and user-friendly features, making it suitable for those who want an efficient solution for lawn maintenance. With its high-performance engine, compact design, and durable build, it stands out as a reliable choice for homeowners aiming to achieve a pristine lawn with ease.
Top Page Image Contents