Snapper ELT180H33IBV Ninja Blade Wear Limits, Standard Blade Sharpening, Ninja Blade Sharpening

Page 26

Section 4 - ADJUSTMENT & REPAIR

4.4.2.(NINJA) BLADE WEAR LIMITS

The ninja recycling blade requires more frequent service intervals than standard blades. Check for excessive wear and damage before each use. See Figure 4.18.

NEW

BLADE

WEAR LIMIT. (CRACKS

OR NOTCHES BEGIN

TO APPEAR)

DANGEROUS CONDITION!

DO NOT USE ON MOWER!

FIGURE 4.18

4.4.3.(STANDARD) BLADE SHARPENING

Blades should be kept sharp at all times. When the blades are dull, cut grass will be ragged and lawn will usually turn brown. Sharpen standard blades as follows:

1.Move tractor to a firm, level surface.

2.Turn engine "OFF". Remove key.

3.Remove mowing deck from tractor.

4.Remove mower blade(s).

5.If a blade is in good condition, sharpen cutting edge at an angle of 22 to 28 degrees. DO NOT sharpen beyond existing cutting edge. Replace blades not in good condition. See Figure 4.19.

22º TO 28º

STANDARD BLADE

ORIGINAL CUTTING EDGE

FIGURE 4.19

4.4.4.(NINJA) BLADE SHARPENING

The Ninja recycling blades requires more frequent service intervals than standard blades. When the blades are dull, cut grass will be ragged and lawn will usually turn brown. Sharpen standard blades as follows:

1.Move tractor to a firm, level surface.

2.Turn engine "OFF". Remove key.

3.Remove mowing deck from tractor.

4.Remove mower blade(s).

5.Sharpen all cutting edges of the Ninja recycling blade at an angle of 22 to 28 degrees for optimum performance. See Figure 4.20.

NINJA BLADE

22º TO 28º

BLADE TIP

FIGURE 4.20

WARNING

DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug. Engine and components can be extremely hot. Avoid burns by allowing engine and components sufficient time to cool. Wear heavy leather gloves when handling or working around cutting blades. Blades are extremely sharp and can cause severe injury.

4.4.5.33" MOWER BLADE REPLACEMENT

1.Move tractor to a firm, level surface.

2.Turn engine "OFF". Remove key.

3.Remove mowing deck from tractor.

4.Position deck on its left side to access blade.

5.Remove blade mounting bolts, nuts and washers. See Figure 4.21.

NUT

BLADE

LOCK WASHER

BLADE

BAR

BLADE MOUNTING

BOLTS

FIGURE 4.21

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Model Number Explanation 180Important Safety Instructions Important Safety Instructions Towing Table of Contents Familiarization ControlsFamiliarization Decals / Symbols Lights on Engine OFF PRE-START Checklist OPERATOR’S Seat Adjustment Front to Rear AdjustmentStarting & Operation Starting Engine OFFStopping ENGINE, BLADE, Wheel Drive 2.4.1 Stopping Engine Starting & Operation 2.3.2. Starting Wheel DriveStarting Mower Blade Stopping Wheel DriveStopping Stopping Mower Blade Setting Park BrakeCutting Height Adjustment Releasing Park BrakeRolling Tractor with Engine OFF Rolling Hydro Models Reverse Lockout Mechanism Reverse Lockout Mechanism OverrideChange Engine OIL Service After First 5 HoursIntroduction Check Blade BrakeMower Components Service Every 25 Operating Hours Check EngineCheck Deck Drive Belt Tractor Lubrication Annually END of Each Season Fuel FilterEngine Must not Start if Annually END of Each Season 3.4.2. Fuel FilterSpark Plug Hydrostatic Transmission OIL Engine should Start ifOn next Engine Adjustments & RepairBlade Brake Adjustment Blade Belt Adjustment 33 Deck from previous Adjusting Mower Blade 33 Decks OnlySide View of Deck Deck Level Adjustment Side to Side Deck Level Adjustment Front to Rear Front Lift ROD Deck Level Adjustment Side to SideDeck Level Adjustment Front to Rear Sector Plates Shifter Adjustment Tractor Drive Components 4.3.1. Brake AdjustmentSteering Adjustment Mower Blade Service Standard Blade Wear Limits Standard Blade Sharpening Mower Blade ReplacementNinja Blade Wear Limits Ninja Blade SharpeningMower Deck Removal Mower Blade ReplacementTraction Drive Belt Replacement Traction drive belt removalView from Underneath Tractor Traction drive belt replacementTraction drive belt removal from previous Deck Drive Belt Traction drive belt replacement from previousDeck Belt Removal & Replacement Battery Service Battery Battery RemovalBattery Installation Battery StorageBattery Testing NEW Battery PreparationAvailable Accessories Available ELT150H33IBV AccessoriesElectrical System Schematics Briggs & Stratton with Lights Problem Probable Cause Corrective ActionEngine speed too slow Tractor Will Not 1. Speed control handle in the neutral NPosition Maintenance Parts Year Limited Warranty Disclaimer of WarrantyService Notes European Lawn Tractor Hydrostatic Drive Series

ELT180H33IBV specifications

The Snapper ELT180H33IBV is an exceptional lawn mower designed for efficiency and ease of use, making it an ideal choice for homeowners looking to maintain their lawns with minimal effort. This mower is part of Snapper’s reputation for producing reliable and high-performance outdoor power equipment, delivering a robust solution for lawn care enthusiasts.

One of the standout features of the ELT180H33IBV is its powerful engine. It is equipped with a 180cc Briggs & Stratton engine, providing ample horsepower to tackle various mowing tasks with ease. This engine is designed for efficiency, ensuring that users can mow larger areas without frequent refueling, which significantly enhances productivity during mowing sessions.

The Snapper ELT180H33IBV features a 33-inch cutting deck, making it compact yet efficient. The size allows for maneuverability in tight spaces, such as flower beds and garden edges, while still covering enough ground to make mowing quicker. The cutting deck height is easily adjustable, offering multiple height settings to achieve the desired grass length, which adds versatility to accommodate different types of lawns.

In terms of technology, the ELT180H33IBV is equipped with a user-friendly starting system. The mower features an easy pull-start mechanism, and the engine is designed to start with minimal effort, ensuring that users can quickly get to work without frustration.

Another important characteristic of this mower is its durability. Snapper has built this model with high-quality materials to withstand the rigors of outdoor use. The rugged construction ensures long-lasting performance, significantly reducing the need for frequent repairs or replacements.

For added convenience, the Snapper ELT180H33IBV incorporates a rear bagging system, which collects clippings for easy disposal. By using the bagging option, homeowners can keep their lawns looking neat and tidy without the hassle of raking.

Moreover, the mower comes with comfortable handles that provide a secure grip, enhancing overall control during operation. This ergonomic design reduces fatigue, making it easier to maneuver the mower over extended periods.

In summary, the Snapper ELT180H33IBV is a well-rounded mower that combines power, versatility, and user-friendly features, making it suitable for those who want an efficient solution for lawn maintenance. With its high-performance engine, compact design, and durable build, it stands out as a reliable choice for homeowners aiming to achieve a pristine lawn with ease.
Top Page Image Contents