Snapper ELT180H33IBV important safety instructions Towing

Page 4

IMPORTANT SAFETY INSTRUCTIONS

TOWING

1.Tow only with a machine that has a hitch designed for towing. DO NOT attach towed equipment except at the hitch point.

2.Follow the manufacturer’s recommendation for weight limits for towed equipment and towing on slopes.

3.DO NOT allow children or others on towed equipment.

4.On slopes, the weight of the towed equipment may cause loss of traction and loss of control.

5.Travel slowly and allow extra distance to stop.

MAINTENANCE

(Continued From Previous Column)

15.Maintain or replace safety and instruction labels as necessary.

16.Use only genuine SNAPPER replacement parts to assure that original standards are maintained.

MAINTENANCE

1.DO NOT store machine or fuel container inside where fumes may reach an open flame, spark or pilot light such as in a water heater, furnace, clothes dryer or other gas appliance. Allow engine to cool before storing machine in an enclosure. Store fuel container out of the reach of children in a well ventilated, unoccupied building.

2.Keep engine free of grass, leaves or excess grease to reduce fire hazard and engine overheating.

3.When draining fuel tank, drain fuel into an approved container outdoors and away from open flame.

4.Check brakes frequently; adjust, repair or replace as needed.

5.Keep all bolts, nuts and screws properly tight. Check that all cotter pins are in proper position.

6.Always provide adequate ventilation when running engine. Exhaust gases contain carbon monoxide, an odorless and deadly poison.

7.Disconnect negative (black) cable from battery before performing maintenance or service. Cranking engine could cause injury.

8.DO NOT work under machine without safety blocks.

9.Service engine and make adjustments only when engine is stopped. Remove spark plug wire(s) from spark plug(s) and secure wire(s) away from spark plug(s).

10.DO NOT change engine governor speed settings or overspeed engine.

11.Lubricate machine at intervals specified in manual to prevent controls from binding.

12.Mower blades are sharp and can cut. Wrap the blades or wear heavy leather gloves and use CAUTION when handling them.

13.DO NOT test for spark by grounding spark plug next to spark plug hole; spark plug could ignite gas exiting engine.

14.Have machine serviced by an authorized SNAPPER dealer at least once a year and have the dealer install any new safety devices.

4

Image 4
Contents Model Number Explanation 180Important Safety Instructions Important Safety Instructions Towing Table of Contents Familiarization ControlsFamiliarization Decals / Symbols Lights on Engine OFF PRE-START Checklist OPERATOR’S Seat Adjustment Front to Rear AdjustmentStarting & Operation Starting Engine OFFStarting & Operation 2.3.2. Starting Wheel Drive Starting Mower BladeStopping ENGINE, BLADE, Wheel Drive 2.4.1 Stopping Engine Stopping Wheel DriveSetting Park Brake Cutting Height AdjustmentStopping Stopping Mower Blade Releasing Park BrakeRolling Tractor with Engine OFF Rolling Hydro Models Reverse Lockout Mechanism Reverse Lockout Mechanism OverrideService After First 5 Hours IntroductionChange Engine OIL Check Blade BrakeCheck Deck Drive Belt Service Every 25 Operating Hours Check EngineMower Components Tractor Lubrication Annually END of Each Season Fuel FilterAnnually END of Each Season 3.4.2. Fuel Filter Spark Plug Hydrostatic Transmission OILEngine Must not Start if Engine should Start ifBlade Brake Adjustment Engine Adjustments & RepairOn next Blade Belt Adjustment 33 Deck from previous Adjusting Mower Blade 33 Decks OnlySide View of Deck Deck Level Adjustment Side to Side Deck Level Adjustment Front to Rear Sector Plates Deck Level Adjustment Side to SideDeck Level Adjustment Front to Rear Front Lift ROD Steering Adjustment Tractor Drive Components 4.3.1. Brake AdjustmentShifter Adjustment Mower Blade Service Standard Blade Wear Limits Mower Blade Replacement Ninja Blade Wear LimitsStandard Blade Sharpening Ninja Blade SharpeningMower Blade Replacement Traction Drive Belt ReplacementMower Deck Removal Traction drive belt removalTraction drive belt removal from previous Traction drive belt replacementView from Underneath Tractor Deck Belt Removal & Replacement Traction drive belt replacement from previousDeck Drive Belt Battery Battery Removal Battery InstallationBattery Service Battery StorageBattery Testing NEW Battery PreparationAvailable Accessories Available ELT150H33IBV AccessoriesElectrical System Schematics Briggs & Stratton with Lights Problem Probable Cause Corrective ActionPosition Tractor Will Not 1. Speed control handle in the neutral NEngine speed too slow Maintenance Parts Year Limited Warranty Disclaimer of WarrantyService Notes European Lawn Tractor Hydrostatic Drive Series

ELT180H33IBV specifications

The Snapper ELT180H33IBV is an exceptional lawn mower designed for efficiency and ease of use, making it an ideal choice for homeowners looking to maintain their lawns with minimal effort. This mower is part of Snapper’s reputation for producing reliable and high-performance outdoor power equipment, delivering a robust solution for lawn care enthusiasts.

One of the standout features of the ELT180H33IBV is its powerful engine. It is equipped with a 180cc Briggs & Stratton engine, providing ample horsepower to tackle various mowing tasks with ease. This engine is designed for efficiency, ensuring that users can mow larger areas without frequent refueling, which significantly enhances productivity during mowing sessions.

The Snapper ELT180H33IBV features a 33-inch cutting deck, making it compact yet efficient. The size allows for maneuverability in tight spaces, such as flower beds and garden edges, while still covering enough ground to make mowing quicker. The cutting deck height is easily adjustable, offering multiple height settings to achieve the desired grass length, which adds versatility to accommodate different types of lawns.

In terms of technology, the ELT180H33IBV is equipped with a user-friendly starting system. The mower features an easy pull-start mechanism, and the engine is designed to start with minimal effort, ensuring that users can quickly get to work without frustration.

Another important characteristic of this mower is its durability. Snapper has built this model with high-quality materials to withstand the rigors of outdoor use. The rugged construction ensures long-lasting performance, significantly reducing the need for frequent repairs or replacements.

For added convenience, the Snapper ELT180H33IBV incorporates a rear bagging system, which collects clippings for easy disposal. By using the bagging option, homeowners can keep their lawns looking neat and tidy without the hassle of raking.

Moreover, the mower comes with comfortable handles that provide a secure grip, enhancing overall control during operation. This ergonomic design reduces fatigue, making it easier to maneuver the mower over extended periods.

In summary, the Snapper ELT180H33IBV is a well-rounded mower that combines power, versatility, and user-friendly features, making it suitable for those who want an efficient solution for lawn maintenance. With its high-performance engine, compact design, and durable build, it stands out as a reliable choice for homeowners aiming to achieve a pristine lawn with ease.