Snapper CP215019KW, CP215519HV, CP216019KWV, CP215519HV Recycling Operation

Page 11

Section 2 - OPERATING INSTRUCTIONS

WARNING

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

2.10INSTALLATION of DISCHARGE DEFLECTOR (Optional accessory on some models)

Install discharge deflector if discharging is desired. Grass Bag and Bag Adapter or Recycling Cover must be removed.

1.Remove front and rear nuts that secure Bag Adapter or Recycling Cover to deck. Refer to sections concerning these parts.

2.Install discharge deflector and secure to deck using hardware just removed in Step 1. Slot in front edge of discharge deflector must be under nut as shown and both bolts protruding through holes in the side of the deflector. Secure nuts to the side of deflector. Tighten nuts securely. See Figure 2.15.

INSTALL

 

SLIDE

DISCHARGE

 

DEFLECTOR

DEFLECTOR

 

SLOT

INSTALL

NUTS

FIGURE 2.15

2.11INSTALLATION of RECYCLING COVER (Optional Accessory on Some Models)

It will be necessary to remove bag adapter and grass bag or discharge deflector before installing recycling cover. See previous section for instructions. Install the recycling cover and secure to the side and top of the deck with the two nuts provided on the machine. Slide top portion of cover under nut secured to the deck. See Figure 2.16.

RECYCLING

COVER

INSTALL RECYCLING

COVER TO THE DECK

USING THE TWO NUTS

FIGURE 2.16

2.12 RECYCLING OPERATION

NOTE: For best recycling results, cut up to a maximum of 1/3 of grass blade length and recycle ONLY when grass is dry.

1.Set all wheels in the highest cutting position (Notch 7).

2.Move engine speed control to “FAST” (Rabbit) position.

3.Move ground speed control to slowest speed setting.

4.Proceed mowing slowly. If grass is very dense, lower each rear wheel latch one notch lower than the front wheel latches to improve recycling performance.

WARNING

DO NOT operate without entire Grass Catcher or guard in place. Grass Catcher components are subject to deterioration during normal use. Inspect frequently and replace worn or damaged components immediately.

WARNING

Grass Catcher bags used on SNAPPER products are made of woven fabric, and are subject to deterioration and wear during normal usage. Check condition of bag before each use. Immediately replace worn or damaged catcher bags with only bags recommended by SNAPPER. The grass catcher is optional equipment on some models.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Steel Deck Walk Mowers Commercial Models Series Engine Designation Series Designation Engine Horse PowerImportant Safety Instructions From Previous Column From PreviousDo not refuel the machine indoors Important Safety Instructions Table of Contents Nomenclature Engine Speed ControlIntroduction Starting & Operation Engine & Blade PRE-START Check ListStopping Handle Height AdjustmentCutting Height Adjustment Propelling MowerLatch Position Cutting Height Settings Removing and Dumping Grass Catcher Slide Closure Type Recycling Operation Dispose of drain oil properly Service After First 5 Hours 3.2.1. Change Engine OILCheck Engine Drive Belt Service AnnuallyStorage Procedure Check Mower Blade1.A. Ninja Blade Wear Limit Mower Blade Replacement Standard Blade Wear LimitBlade Sharpening Wheel Drive Control Adjustment Driven Disc Adjustment Driven and Drive Disc ServiceCleaning Drive Disc & Driven Disc Drive Spring Repair/ReplacementOn Next Replacing Driven Disc Rubber Ring Reassemble components in reverse order Remove bearing and replace with new bearingOn Next Belt ServiceEngine Drive Belt Replacement Stretch Type Belts Pulley Position Reinstall blade hub and cutter bladeCorrective Action Problem Probable CauseUSE HRS Season Service Performed EachMAINTENANCE/REPLACEMENT Parts 100Disclaimer of Warranty Year Limited WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Snapper Product Registration Form Page Page Page Steel Deck Walk Behind Mowers Commercial Models Series

CP215019KW, CP215519HV, CP216019KWV, CP215519HV specifications

The Snapper CP216019KWV, CP215519HV, CP215019KW, and CP215519HV models are robust lawn mowers designed to cater to various residential and professional mowing needs. Each model is built with cutting-edge technologies and features that enhance performance, durability, and user-friendliness.

The CP216019KWV is favored for its powerful 21-inch cutting deck that allows for efficient mowing over large areas. With a 190cc engine, it delivers reliable performance and impressive torque, ensuring that grass cutting is smooth and effortless. The adjustable cutting height provides users with the flexibility to achieve their desired lawn appearance, making it suitable for different grass types. Furthermore, it boasts a self-propelling mechanism which allows for easy maneuvering, especially on hilly terrains.

In contrast, the CP215519HV model stands out with its innovative Variable Speed Drive system. This feature enables the operator to adjust the mower's speed according to their walking pace, making it more comfortable to use over extended periods. The 21-inch deck is also designed for versatility, allowing for both bagging and mulching options, which enhances the mowing experience and benefits lawn health.

The CP215019KW is another model that focuses on efficiency and power. With a 150cc engine, this mower is lightweight yet formidable, providing enough power for residential yard maintenance. Its compact design makes it easy to store, while still offering features like an easy-start recoil and a durable steel deck that guarantees longevity. The integrated bagging system collects clippings neatly, keeping lawns tidy.

Finally, the CP215519HV model presents a balanced option with user-friendly features and a solid construction. It integrates a powerful engine that ensures consistent grass cutting capabilities and a quick-change height adjustment lever to transition seamlessly between different grass lengths. Its dual-lever height adjustment system enhances precision, allowing for custom cutting heights tailored to specific lawn requirements.

All four models are equipped with Snapper's commitment to quality, making them excellent choices for anyone looking to maintain a manicured lawn. With ergonomic designs, easy-to-use features, and durable construction, they provide powerful solutions for both novice and seasoned gardeners alike.
Top Page Image Contents